Yale Conexis L1 battery life issue.

Contacted Yale UK as well. They are replacing my module. Will report it here.

Let me know how you get on. I have the new firmware / replacement module and it's made no difference for me

Received / installed a new module. Will see the battery life...

What FW do you have?
Used to be "app version 32.16" on mine, now 33.16.

Z-Wave Syncing - retrieved battery level of 100%
Z-Wave Syncing - retrieved module neighbors list: 3, 4, 5, 12, 21, 25, 29, 30, 31, 34, 37, 39, 40, 42, 46, 54, 56, 57, 59, 60, 64, 65, 66, 71, 74, 84, 85, 88, 90, 98, 104, 115, 122, 126, 127, 130, 137, 141, 148, 150, 151, 159, 175, 182, 187, 196, 201, 204, 217, 219, 222, 225, 227, 228, 232
Z-Wave Syncing - assigning return route to "035 - Keypad Door Lock"
Z-Wave Syncing - retrieved manufacture and model names: Yale - 0129, Keypad Door Lock - 66000002
Z-Wave Syncing - retrieved protocol version 4.61, app version 33.16
Z-Wave Syncing - retrieved class hierarchy: Routing Slave : Entry Control : Keypad Door Lock (04 : 40 : 03, base 62)
Z-Wave Syncing - retrieved command classes: 20v1 80v1 62v1 63v1 85v1 86v1 4Cv1 8Av1 8Bv1 6Cv1 70v1 71v1 72v1 73v1 55v1 98v1 59v1 5Av1 7Av1 5Ev1 9Fv1
Z-Wave Syncing - retrieved encrypt commands: 80 62 85 86 4C 8A 8B 6C 70 71 72 73 59 5A 7A
Z-Wave Syncing - retrieved capabilities: routing, battery, beaming, security, frequentWaking
Z-Wave Syncing - retrieved group 1 associations: []
Z-Wave Syncing - added group 1 association to interface
Z-Wave received "ChildRoom Temperature Sensor" sensor update to 22.0 °C
Z-Wave received "ChildRoom Humidity Sensor" sensor update to 42%
Z-Wave Syncing - retrieved battery level of 96%
Z-Wave Syncing - changed device "Conservatory Door to Garden Lock" address from undefined to 035
Z-Wave Syncing - complete

Ah that's interesting, mine is still 32.16!
I might ask them for another module then...

Syncing - started for "Front Door Lock"
Z-Wave Syncing - retrieved module neighbors list: 2, 4, 5, 8, 18, 21, 30, 32, 33, 35, 36, 37, 38, 39, 82
Z-Wave Syncing - assigning return route to "089 - Front Door Lock"
Z-Wave Syncing - assigned return route
Z-Wave Syncing - retrieved manufacture and model names: Yale - 0129, Keypad Door Lock - 66000002
Z-Wave Syncing - retrieved protocol version 4.61, app version 32.16
Z-Wave Syncing - retrieved class hierarchy: Routing Slave : Entry Control : Keypad Door Lock (04 : 40 : 03, base 62)
Z-Wave Syncing - retrieved command classes: 80v1 85v1 86v1 8Av1 8Bv1 4Cv1 55v1 98v1 59v1 5Av1 5Ev1 9Fv1 20v1 62v1 63v1 6Cv1 70v1 71v1 72v1 73v1 7Av1
Z-Wave Syncing - retrieved encrypt commands: 80 85 86 8A 8B 4C 59 5A 62 6C 70 71 72 73 7A
Z-Wave Syncing - retrieved capabilities: routing, battery, beaming, security, frequentWaking
Z-Wave Syncing - retrieved group 1 associations: [1]
Z-Wave Syncing - group 1 association to interface already exists (skipping)
Z-Wave Syncing - retrieved battery level of 100%
Z-Wave Syncing - complete
Z-Wave sent "Front Door Lock" status request

So they sent you the old module - FW with the battery drain issue not fixed.

Yale UK - facepalm.

Any tips on how you got the new module?

On Twitter they have changed their support page, now all I'm getting is a reply to tell me to message their new twitter page, on which all of my messages are being ignored!

Scratch that, new module is in the post apparently now.

Last set of batteries lasted just 2 days

So far it is doing well

Hmmm, so I have the replacement module now.
Installed.
Included.
But can't do a sync.... is there a way to wake the module up?
I get the 3 pushes for include / exclude, but there doesn't seem to be a button press for wake, i.e so it's awake whilst it sync's...

Woo!

Z-Wave Syncing - retrieved module neighbors list: 2, 4, 5, 8, 18, 20, 21, 32, 33, 35, 36, 37, 38, 39, 56, 82
Z-Wave Syncing - assigning return route to "094 - Keypad Door Lock"
Z-Wave Syncing - assigned return route
Z-Wave Syncing - retrieved manufacture and model names: Yale - 0129, Keypad Door Lock - 66000002
Z-Wave Syncing - retrieved protocol version 4.61, app version 33.16
Z-Wave Syncing - retrieved class hierarchy: Routing Slave : Entry Control : Keypad Door Lock (04 : 40 : 03, base 62)
Z-Wave Syncing - retrieved command classes: 20v1 80v1 62v1 63v1 85v1 86v1 4Cv1 8Av1 8Bv1 6Cv1 70v1 71v1 72v1 73v1 55v1 98v1 59v1 5Av1 7Av1 5Ev1 9Fv1
Z-Wave Syncing - retrieved encrypt commands: 80 62 85 86 4C 8A 8B 6C 70 71 72 73 59 5A 7A
Z-Wave Syncing - retrieved capabilities: routing, battery, beaming, security, frequentWaking
Z-Wave Syncing - retrieved group 1 associations: []
Z-Wave Syncing - added group 1 association to interface
Z-Wave Syncing - retrieved battery level of 100%
Z-Wave Syncing - created device "094 - Keypad Door Lock"

Just to confirm.

So, for me the issue seems to be fixed with a new module firmware.