Fibaro Single Switch Relay 2 2nd Switch

I’ve got a couple of FGS213 modules that work perfectly fine for the relay side of things, and when synced create the 2nd device for the secondary switch.. but pressing it has no effect in indigo, the device for it remains unchanged. Now the odd thing is that sending a status request will update it.. but ONLY if the primary device has had some activity within a few moments of it. If I leave it all for 5 mins, press the 2nd switch and then do a status update nothing happen. If I then use the primary device and send a status request for the secondary.. it updates! Bizarre eh?

I believe there’s a fix in the pipeline for this.


Sent from my iPhone using Tapatalk Pro

Ah super. Hadn’t seen it reported elsewhere publicly.


Sent from my iPhone using Tapatalk

[matt (support)]

Actually, this one isn't fixed.

But I probably have a workaround.

Try the first 2 steps listed here. And for some details as to what I think is occurring and why I'm not enabling an Indigo-side fix yet for this one read this post.

Actually, this one isn't fixed.

But I probably have a workaround.

Try the first 2 steps listed here. And for some details as to what I think is occurring and why I'm not enabling an Indigo-side fix yet for this one read this post.

Ahh I never thought about the double switch model as I have plenty of the older one that works perfectly.

I’ll have a look at the steps and see if it helps. It’s hardly a big issue though, was gonna use it kinda a backup switch in case the network went down.


Sent from my iPhone using Tapatalk