Qubino Flush Micro Dimmer ZMNHDD

I've just installed one of these units and am struggling ( ie failing) to get the Indigo device to show any status change on the I2 and I3 inputs. I've followed the instructions on setting the I2 and I3 inputs as enabled and then exclude and re-include and sync with indigo. I'm not seeing any indication in indigo of any status change of I2 and I3. Before I throw it away in disgust does anyone have any bright ideas about ho to get a status change out of these extra inputs to this unit?

Colin

[matt (support)]

Re-sync it and copy/paste the Event Log results into a reply for us. I want to compare it to how other ZMNHDD sync (from previous forum posts).

Here you go Matt.
The Part number is ZMNHDD1 H1S3P4

Code: Select all

Syncing - retrieved manufacture and model names: Qubino - 0159, Flush Micro Dimmer (ZMNHDD) - 00010051
   Z-Wave                          Syncing - retrieved protocol version 4.05, app version 3.05
   Z-Wave                          Syncing - retrieved class hierarchy: Routing Slave : Mulitlevel Switch : Dimmable Power Switch (04 : 11 : 01, base 26)
   Z-Wave                          Syncing - retrieved command classes: 20v1 60v4 30v1 25v1 26v3 27v1 72v1 8Ev1 70v1 71v1 32v4 73v1 5Ev1 59v1 5Av1 86v1 85v1
   Z-Wave                          Syncing - retrieved encrypt commands: - none -
   Z-Wave                          Syncing - retrieved capabilities: routing, beaming
   Z-Wave                          Syncing - retrieved multi-endpoint types: 1:(11 : 01), 2:(20 : 00), 3:(20 : 00)
   Z-Wave                          Syncing - retrieved multi-endpoint classes: 1:[5E 85 8E 59 27 25 26 32 71], 2:[5E 85 8E 59 30 71], 3:[5E 85 8E 59 30 71]
   Z-Wave                          Syncing - retrieved group 1 associations: [1]
   Z-Wave                          Syncing - retrieved group 2 associations: []
   Z-Wave                          Syncing - retrieved group 3 associations: []
   Z-Wave                          Syncing - retrieved group 4 associations: []
   Z-Wave                          Syncing - retrieved group 5 associations: []
   Z-Wave                          Syncing - retrieved group 6 associations: []
   Z-Wave                          Syncing - retrieved group 6 associations: []
   Z-Wave                          Syncing - retrieved group 8 associations: []
   Z-Wave                          Syncing - retrieved group 9 associations: []
   Z-Wave                          Syncing - retrieved group 10 associations: []
   Z-Wave                          Syncing - retrieved group 11 associations: []
   Z-Wave                          Syncing - group 1 association to interface already exists (skipping)
   Z-Wave                          Syncing - added group 4 multi association to interface
   Z-Wave                          Syncing - added group 11 multi association to interface
   Z-Wave                          Syncing - retrieved parameter 30 "Power up state" is 0 "Last State"
   Z-Wave                          Syncing - retrieved parameter 100 "Input 2 notifications" is 9 "Enabled"
   Z-Wave                          Syncing - retrieved parameter 101 "Input 3 notifications" is 9 "Enabled"
   Z-Wave                          Syncing - retrieved parameter 1 "Input 1 mode" is 0 "Momentary"
   Z-Wave                          Syncing - retrieved parameter 2 "Input 2 mode" is 0 "Momentary"
   Z-Wave                          Syncing - retrieved parameter 3 "Input 2 type" is 0 "Normally Open"
   Z-Wave                          Syncing - retrieved parameter 4 "Input 3 type" is 0 "Normally Open"
   Z-Wave                          Syncing - retrieved parameter 20 "Enable 3-way switch mode" is false
   Z-Wave                          Syncing - retrieved parameter 21 "Enable double-click to maximum brightness" is true
   Z-Wave                          Syncing - retrieved parameter 60 "Minimum value" is 1
   Z-Wave                          Syncing - retrieved parameter 61 "Maximum value" is 99
   Z-Wave                          Syncing - retrieved parameter 65 "Button tap duration" is 100 * 10 milliseconds
   Z-Wave                          Syncing - retrieved parameter 66 "Button down duration" is 3 seconds
   Z-Wave                          Syncing - retrieved parameter 110 "Temperature offset" is 32536 * 0.1 degrees
   Z-Wave                          Syncing - retrieved parameter 120 "Temperature sensitivity" is 5 * 0.1 degrees
   Z-Wave                          Syncing - complete


[matt (support)]

Okay, your sync results look good to me. It sounds like you followed the onerous process to get the inputs working, but for clarity did you follow the steps on this forum post exactly? Note there are some links to other posts on there discussing getting the I2 and I3 inputs working correctly.

Also, try turning on the Z-Wave debug logging checkbox (via the config dialog -- Interfaces->Z-Wave->Configure... menu item), then toggle the inputs and wait a few seconds to see if anything is logged.

HI Matt
I did follow the instructions on the other thread to get i2 and i3 working, but to no avail, I'll have to try again, although I'm not sure its going to be worth while if the delay in reporting is as long as being reported.

cheers

Colin