Black Cat's documentation (https://www.dropbox.com/s/nchat61cp2gigae/ZWBCL2-Full%20Instal%20Guide%20V1-2.05.pdf?dl=0] suggests that these are rebranded Philio PAN04 or 06 devices, which is listed as an Indigo supported device.
With default parameter settings, these switches create three devices - Relay 1, 2 and 3. Relays 1 & 2 are hardware switches, whilst Relay 3 can be set to operate both relays (I think!).
By altering the parameters I have removed "Endpoint 3" (Relay 3) and have managed to gain independent control of the hardware Relays 1 & 2.
Indigo reports the device details as follows:
Indigo Z-Wave Version: 2.0.103
Node ID: 33
Model: Relay Power Switch
Model ID: 00010013
Manufacturer: Philio
Manufacturer ID: 013C
Protocol Version: 3.95
Application Version: 1.08
Model Definition Version: 0
Library Type: 3
Class Name: Relay Power Switch
Class Hierarchy: 04 : 10 : 01
Command Class Base: 25
Command Versions: 20v1 85v1 86v1 59v1 5Av1 5Ev1 60v3 25v1 27v1 2Bv1 2Cv1 70v1 71v1 72v1 73v1 75v1 7Av1
Encryption Status: Not Supported
Multi-Endpoint Types: 1:(10 : 01), 2:(10 : 01)
Multi-Endpoint Classes: 1:[25 20], 2:[25 20]
Multi-Instance Counts: - none -
Features: routing, beaming
Neighbors: 8, 28, 36
Associations: 1:[1] 2:[] 3:[]
Config Values: - none -
Whilst operation of the relays is ok, I am finding that the device status reporting, when presented on a control page is weird:
Relay 1 (R1) presents as normal - ie when R1 is on the status is on as displayed on the control page, and when off the status is displayed as off.
BUT!
When Relay 2 is turned on, the status of BOTH R1 AND R2 is displayed as on - even though R1 is not actually turned on. Similarly, when R2 is turned off, the status of both R2 and R1 is displayed as off - even though R1 has not physically changed status!
A typical extract from the Indigo log when R2 is turned on is:
- Code: Select all
Z-Wave sent "Relay2" on
Z-Wave received "Relay1" status update is on
A similar (but different) situation was discussed regarding a similar Philio device some time ago in another forum (http://forums.indigodomo.com/viewtopic.php?f=152&t=16323&hilit=Philio+PAN04).
Despite attempting every permutation and combination of accessible device parameters, I have not been able to rectify this. I suspect it has something to do with the weird and wonderful world of ZWave command classes, and was hoping that someone with some knowledge of this area might lend a hand - or if it needs to be added as an Indigo-supported device.
If you have a clue and need further assistance, let me know!
mclass