ZRC_90 scene controller

Hi,

thinking about buying two of these.
Does anybody knows if the european (ZRC-90EU) version ist supported?

Yassi

Hi Yassi,
Yes it is - I am using a number of them.

Jon, cool, thanks!
Want to put one in the ground floor and one in the first floor, to activate some scenes (like "good night", "good morning" and so on).

Yassi

I'm on the UK version - not sure if it's same as EU or not - but its ideal for what you want.


Sent from my iPhone using Tapatalk

howartp, thanks for your feedback.

I've just ordered one for 45€, should be here in 1-2 days.
Excited

Yassi

Just to clarify, mine are indeed: ZRC-90EU.

I guess the 'EU' refers to theZ-Wave frequency (868.42MHz) that we use in the UK and the rest of Europe.

You're correct Jon, that's the frequency in the EU.

Yassi

Jon, now I have the same issue as you had...

Included (pressed just the "L" button), but it only shows the battery update status when I press a button.
Have to mention, I have the Gen5 stick.

What's about the stuff "CommEnabled" and the plugin matt mentioned?
Do I have to install it?
I'm totally confused now...

Yassi

Comm Enabled is the tick box to enable/disable the device (any device) in the Indigo devices list.


Sent from my iPhone using Tapatalk

Hi Yassi,
If I "write Device Details to Event Log" from "Edit Device Settings...", I get:

26 Jan 2017, 13:57:40
Z-Wave Indigo Device "043 - Two Green Dots (ZRC-90)" Z-Wave Properties:
Indigo Z-Wave Version: 2.0.54
Node ID: 43
Model: Scene Master (ZRC-90)
Model ID: 00018510
Manufacturer: Remotec
Manufacturer ID: 5254
Protocol Version: 4.05
Application Version: 1.01
Model Definition Version: 1
Library Type: 2
Class Name: Remote Control Simple
Class Hierarchy: 01 : 01 : 06
Command Class Base: 00
Command Versions: 20v1 80v1 84v2 85v1 86v1 21v1 72v1 73v1 59v1 5Av1 5Bv1 5Ev1
Encryption Status: Not Supported
Multi-Endpoint Types: - none -
Multi-Endpoint Classes: - none -
Multi-Instance Counts: - none -
Features: battery, beaming, waking
Neighbors: - none -
Associations: 1:[1]
Config Values: - none -

Best to check that your device matches the above first.

Another suggestion is to do factory reset on the device and try and include it again: Press R to reset - hold for 10 seconds - the first five seconds there is no LED, then 5 seconds of blue LED, when the LED goes out, immediately do a quick triple click - LED should flash to indicate it has reset. I seem to remember it took a number of attempts to get this toe work.

Hi Jon,

ok, I will try this, thanks a lot!

But which button should I press three times? The "R" again?

immediately do a quick triple click

Yassi

Hi Yassi,
Yes - the R button.

Ok, got it!
Will post the log.

Yassi

Jon, where is that option in Indigo7 "Write Device Details to Event Log"???
Can't find it!
I can remember, it was in Indigo6 in the "Edit device settings".

Yassi

UPDATE: Ok, I have it now, it appeared again under the device properties fields. After I've tried to reset it the device. Crazy device.

And these are the log informations:

Code: Select all

Indigo Z-Wave Version: 2.0.68
Node ID: 18
Model: Scene Master (ZRC-90)
Model ID: 00018510
Manufacturer: Remotec
Manufacturer ID: 5254
Protocol Version: 4.05
Application Version: 1.01
Model Definition Version: 1
Library Type: 2
Class Name: Remote Control Simple
Class Hierarchy: 01 : 01 : 06
Command Class Base: 00
Command Versions: 20v1 80v1 84v2 85v1 86v1 21v1 72v1 73v1 59v1 5Av1 5Bv1 5Ev1
Encryption Status: Not Supported
Multi-Endpoint Types: - none -
Multi-Endpoint Classes: - none -
Multi-Instance Counts: - none -
Features: battery, beaming, waking
Neighbors: - none -
Associations: 1:[1]
Config Values: - none -

I'm getting crazy with this device.

I've resetted it two times, pulled out the batteries, synced a few times, nothing.
The only thing I'm getting is a battery status update!!!
Doesn't matter which button I press.

I've tried to exclude it, set controller in exclude mode, pressed the "R" knob, LED blinks, nothing happens. Have to stop the exclusion mode.

So, what to do now?

Yassi