No more SYNC : Aeotec Micro Smart Energy DSC18103

This device was in use earlier . I removed all device from the Z-Stick and added my devices again. Syncing the DSC18103 is now impossible, even after several trials.

Any hints are welcome .


intiatingSyncUI (timeout in 300 seconds)
Z-Wave Syncing - started for device "004 - Relay Power Switch"
Z-Wave Debug SENT getNodeNeighbors: 01 06 00 80 04 01 01 7D
Z-Wave Debug RCVD getNodeNeighbors: 01 20 01 80 04 00 10 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 48
Z-Wave Debug . . getNodeNeighbors: nodeId 004, neighbors: 3, 21, 26
Z-Wave Syncing - retrieved module neighbors list: 3, 21, 26
Z-Wave Syncing - requesting neighbor list update of "004 - Relay Power Switch"
Z-Wave Debug SENT requestNeighborUpdate: 01 04 00 48 04 B7
Z-Wave Debug RCVD requestNeighborUpdate: 06 (ACK)
Z-Wave Debug RCVD requestNeighborUpdate: 01 05 00 48 01 21 92
Z-Wave Debug . . requestNeighborUpdate: node 004, update starting
Z-Wave Debug RCVD requestNeighborUpdate: 01 05 00 48 01 22 91
Z-Wave Debug . . requestNeighborUpdate: node 004, update finished
Z-Wave Debug SENT getNodeNeighbors: 01 06 00 80 04 01 01 7D
Z-Wave Debug RCVD getNodeNeighbors: 01 20 01 80 04 00 10 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 48
Z-Wave Debug . . getNodeNeighbors: nodeId 004, neighbors: 3, 21, 26
Z-Wave Syncing - neighbor list update complete (no change)
Z-Wave Syncing - assigning return route to "004 - Relay Power Switch"
Z-Wave Debug SENT assignReturnRoute: 01 05 00 46 04 01 B9
Z-Wave Debug RCVD assignReturnRoute: 01 04 01 46 01 BD
Z-Wave Debug RCVD assignReturnRoute: 01 05 00 46 01 00 BD
Z-Wave Debug . . assignReturnRoute: node 004, success 1
Z-Wave Syncing - assigned return route
Z-Wave Debug SENT requestNodeInfo: 01 06 00 60 04 04 DE 47
Z-Wave Debug RCVD requestNodeInfo: 01 15 00 49 84 04 0F 04 10 01 06 F6 01 00 00 00 00 00 03 01 84 CD 83
Z-Wave Debug . . requestNodeInfo: node 004, combined class list: 20v1 00v1 03v1 84v1 25v1 06v1 01v1 27v1 CDv1 F6v1
Z-Wave Syncing - retrieved class hierarchy: Routing Slave : Relay Switch : Relay Power Switch (04 : 10 : 01, base 25)
Z-Wave Syncing - retrieved command classes: 20v1 00v1 03v1 84v1 25v1 06v1 01v1 27v1 CDv1 F6v1
Z-Wave Debug SENT requestWakeInterval: 01 09 00 13 04 02 84 05 05 DF B8

13.11.2015, 10:08:19
Z-Wave Error Timeout waiting for "004 - Relay Power Switch". Module might be asleep, or is unreachable.

[jay (support)]

Try resyncing the devices between the Z-Stick and the micro switch starting with the one closest to the Z-Stick . This will make sure the routes to the device are good. It is a bit odd that it got that far in the sync process before losing contact. You might want to power cycle it as well before doing the syncs.

THX Jay,

tried this several times without any success .

I changed it with another type of switch, a new one. This works !

So I guess this Aeotec switch is physically broken, for what reason ever?!

$regs snoopje