matt (support) wrote:Press the ON/OFF buttons on it a few times, then from the Trigger's setting dialog press the button to write to the Event Log the most recently received Z-Wave commands. Copy/paste those results into a reply for me and we'll see if we can figure it out.
RedYuriPrime wrote:Do I understand from all this however that buying a new Quibino device with the latest firmware will now work perfectly with Indigo, or are they still a bit dodgy.
I have now removed a number of my dual relays and will ship them off early next week.
Indigo Z-Wave Version: 2.0.68
Node ID: 49
Model: Flush 2 Micro Relay (ZMNHBD)
Model ID: 00020051
Manufacturer: Qubino
Manufacturer ID: 0159
Protocol Version: 4.05
Application Version: 5.00
Model Definition Version: 5
Library Type: 3
Class Name: Relay Power Switch
Class Hierarchy: 04 : 10 : 01
Command Class Base: 25
Command Versions: 20v1 60v4 25v1 86v1 27v1 72v1 8Ev1 70v1 32v4 73v1 59v1 5Av1 5Ev1 85v1
Encryption Status: Not Supported
Multi-Endpoint Types: 1:(10 : 01), 2:(10 : 01)
Multi-Endpoint Classes: 1:[5E 86 25 20 27 85 8E 59 32], 2:[5E 86 25 20 27 85 8E 59 32]
Multi-Instance Counts: - none -
Features: routing, beaming, energyMeter
Neighbors: 13, 14, 15, 19, 22, 23, 43, 44, 46
Associations: 1:[1] 2:[] 3:[] 4:[] 5:[] 6:[] 7:[] 8:[1]
Config Values: 64:0 1:1 2:1 110:32536 120:5 30:0 63:0
Z-Wave Debug RCVD requestRelayStatus: 01 09 00 04 00 36 03 25 03 FF 1E
Z-Wave Debug RCVD requestMeterLevel: 01 10 00 04 00 36 0A 32 02 21 34 00 00 00 0F 00 00 FD
Z-Wave Debug . . requestMeterLevel: node 054, endpoint None, meterType 01, raw value 3400...
Z-Wave Debug . . requestMeterLevel: 1.5 W (float: 1.500000)
Z-Wave received "054 - Relay 1" power load to 1.5 W
Z-Wave Debug RCVD requestMeterLevel: 01 10 00 04 00 36 0A 32 02 21 34 00 00 00 03 00 00 F1
Z-Wave Debug . . requestMeterLevel: node 054, endpoint None, meterType 01, raw value 3400...
Z-Wave Debug . . requestMeterLevel: 0.3 W (float: 0.300000)
Z-Wave received "054 - Relay 1" power load to 0.3 W
Users browsing this forum: No registered users and 3 guests