[SOLVED] Fibaro FGD211 new id code can you support

I'm new to the forum but very impressed by Indigo so far - I'm replacing a Vera 3

I have a lot of Fibaro modules (>100) and some don't get recognized correctly.
So far all the ones not recognized have been FGD211 dimmer modules and have had the ID = 01000106
I have other FGD211 units and they have ID = 01000104
I can set all the appropriate parameters for the 01000104 units but no parameters are accessible for 01000104


The full dump from the log for a 01000106 unit is:

Z-Wave Indigo Device "007 - Office Niche" Z-Wave Properties:
Indigo Z-Wave Version: 1.0.155
Node ID: 7
Model: Dimmable Power Switch
Model ID: 01000106
Manufacturer: Fibaro System
Manufacturer ID: 010F
Protocol Version: 3.34
Application Version: 1.06
Model Definition Version: 0
Library Type: 3
Class Name: Dimmable Power Switch
Class Hierarchy: 04 : 11 : 01
Command Class Base: 26
Command Versions: 20v1 85v1 26v1 27v1 8Ev1 70v1 72v1 73v1 86v1
Multi-Endpoint Types: - none -
Multi-Endpoint Classes: - none -
Multi-Instance Counts: - none -
Features: routing, beaming
Neighbors: 1, 4, 5, 6, 144
Associations: 1:[144] 2:[] 3:[]
Config Values: - none –

And for a 01000104 (which is recognized fine):

Z-Wave Indigo Device "006 - Office Bath Mirror" Z-Wave Properties:
Indigo Z-Wave Version: 1.0.155
Node ID: 6
Model: Dimmer Switch (FGD211)
Model ID: 01000104
Manufacturer: Fibaro System
Manufacturer ID: 010F
Protocol Version: 3.20
Application Version: 1.04
Model Definition Version: 7
Library Type: 3
Class Name: Dimmable Power Switch
Class Hierarchy: 04 : 11 : 01
Command Class Base: 26
Command Versions: 20v1 85v1 26v1 27v1 8Ev1 70v1 72v1 73v1 86v1
Multi-Endpoint Types: - none -
Multi-Endpoint Classes: - none -
Multi-Instance Counts: - none -
Features: routing, beaming
Neighbors: 1, 4, 5, 7, 144
Associations: 1:[144] 2:[] 3:[144]
Config Values: 8:99 9:5 10:0 11:1 12:99 13:98 14:0 15:1 16:1 18:0

I'd really like to get the units working as I was using the parameters to make sure they worked ok with non-dimmable LEDs

[matt (support)]

Hello Rob,

I've added support for 0x01000106 as a FGD211 to Indigo 6.0.5 (not yet available). If you would like to try it now then send me an email (indigo-support AT perceptiveautomation.com).

Hi Matt

Yes, it would be good to try it out.

Thanks

Rob