Another one this morning.
Device: "Central Perk Coffee Light" on Node 8
Added Watcher device to switch.
Press On/off/status/updated/request- Code: Select all
Mar 30, 2023 at 6:28:31 AM
Z-Wave Error unable to execute action -- could not find controller module/node
Z-Wave Error unable to execute action -- could not find controller module/node
Z-Wave Error unable to execute action -- could not find controller module/node
Z-Wave Error unable to execute action -- could not find controller module/node
Z-Wave Error unable to execute action -- could not find controller module/node
Toggled Indigo CommunicationPress "On"- Code: Select all
Mar 30, 2023 at 6:29:36 AM
Z-Wave sent "Central Perk Coffee Light" on
Z-Wave Watcher Debug Raw command sent (Node 8): 01 0A 00 13 08 03 25 01 FF 25 68 7B (True)
Z-Wave received "Under TV Outlet" status update is on
Z-Wave Watcher Debug Raw command received (Node 8): 01 09 00 04 00 08 03 20 03 FF 25
Z-Wave Watcher Debug Command class: 20v1
Z-Wave Watcher Debug Command not yet decoded: 20 03 v1
Z-Wave Watcher Debug Raw command received (Node 8): 01 10 00 04 00 08 0A 32 02 21 74 00 00 06 DA 00 00 50
Z-Wave Watcher Debug Command class: 32v3
Z-Wave Watcher Debug Command not yet decoded: 32 02 v3
Press "Off"- Code: Select all
Mar 30, 2023 at 6:31:11 AM
Z-Wave sent "Central Perk Coffee Light" off
Z-Wave Watcher Debug Raw command sent (Node 8): 01 0A 00 13 08 03 25 01 00 25 69 85 (True)
Z-Wave received "Under TV Outlet" status update is off
Z-Wave Watcher Debug Raw command received (Node 8): 01 09 00 04 00 08 03 20 03 00 DA
Z-Wave Watcher Debug Command class: 20v1
Z-Wave Watcher Debug Command not yet decoded: 20 03 v1
Z-Wave Watcher Debug Raw command received (Node 8): 01 10 00 04 00 08 0A 32 02 21 74 00 00 00 00 00 00 8C
Z-Wave Watcher Debug Command class: 32v3
Z-Wave Watcher Debug Command not yet decoded: 32 02 v3
Right now I'm going through all of my zwave devices to see what other ones have "define and sync" associated with a different device. Will add a watcher device to any of those.
Edit: Went through all 54 Z-Wave devices.... I have 3 with mis-matched "sync using node", 1 needed an update (new definitions with latest indigo release) and 1 is not synced at all (I'll mess with that later after the kids go to school and the house quiets down)
As for the front door lock...
Locking or unlocking via indigo will update the lock icon, correctly lock/unlock the actual device, and both actions turn on the popcorn light GUI.
Locking or unlocking via the device (manual or keypad) works physically, does not update the device in indigo, all actions at the device turn on the popcorn light in GUI.
Example:
- Code: Select all
Mar 30, 2023 at 6:56:06 AM
Z-Wave Watcher Debug Raw command sent (Node 12): 01 11 00 13 0C 0A 98 80 FD ED 60 51 4F E1 63 40 25 70 1A (True)
Z-Wave received "ZWP09 - Bill's Popcorn Lights" status update is on
Z-Wave Watcher Debug Raw command received (Node 12): 01 08 00 04 00 0C 02 98 40 25
Z-Wave Watcher Debug Command class: 98v1
Z-Wave Watcher Debug Command not yet decoded: 98 40 v1
ZEAL Received "Front Door - Keypad Door Lock" alarm report (v1), alarm type 22, alarm level 1
Z-Wave Lock Manager Status: Door unlocked manually [Node: 12]
Z-Wave Watcher Debug Raw command received (Node 12): 01 0A 00 04 00 0C 04 71 05 16 01 FF
Z-Wave Watcher Debug Command class: 71v1
Z-Wave Watcher Debug Command not yet decoded: 71 05 v1
Trigger F Door Lock Device Unlocked Manually
Z-Wave Watcher Debug Raw command received (Node 12): 01 1E 00 04 00 0C 18 98 81 52 5E 7F 8F F2 D9 E1 A7 A3 F8 1F C9 16 FD F3 FF AD B2 31 8E 62 DA 0B
Z-Wave Watcher Debug Command class: 98v1
Z-Wave Watcher Debug Command not yet decoded: 98 81 v1
Will try a full system reboot and see if that helps anything. (I've discovered several other devices/plugins/scripts acting funny during all of this as well)
Edit: After a full system reboot (machine and indigo) all three of the above devices are now synced properly and operating normally.