- Posted on
Sat Feb 11, 2023 11:29 am
-
slackman1
offline
-
- Posts: 52
- Joined: Jun 20, 2011
Hi Matt,
Had to wait for the weekend to do this, log contents for syncing below:
Z-Wave Syncing - started for "stopcontact wasmachine"
Z-Wave Syncing - retrieved module neighbors list: 1, 2, 5, 8, 10, 17, 18, 19, 20, 21, 29, 35, 38
Z-Wave Syncing - assigning return route to "041 - stopcontact wasmachine"
Z-Wave Syncing - assigned return route
Z-Wave Syncing - retrieved manufacture and model names: Fibaro System - 010F, Walli Double Switch (FGWDSEU221) - 1F011000
Z-Wave Syncing - retrieved protocol version 6.02, app version 5.01
Z-Wave Syncing - retrieved class hierarchy: Routing Slave : Relay Switch : Relay Power Switch (04 : 10 : 01, base 25)
Z-Wave Syncing - retrieved command classes: 20v1 25v1 27v1 5Ev1 55v1 98v1 9Fv1 56v1 6Cv1 22v1 85v1 8Ev1 59v1 86v1 72v1 5Av1 73v1 32v3 70v1 71v1 75v1 7Av1
Z-Wave Syncing - retrieved encrypt commands: 70 71 72 73 75 7A 85 86 8E 25 32 59 5A
Z-Wave Syncing - retrieved capabilities: routing, beaming, security
Z-Wave Syncing - retrieved group 1 associations: []
Z-Wave Syncing - retrieved group 2 associations: []
Z-Wave Syncing - added group 1 association to interface
Z-Wave Syncing - failed to retrieve parameter 20 "Switch Type" (skipping)
Z-Wave Syncing - failed to retrieve parameter 150 "Switch 1 mode" (skipping)
Z-Wave Syncing - failed to retrieve parameter 152 "Switch 1 behavior" (skipping)
Z-Wave Syncing - failed to retrieve parameter 154 "Switch 1 duration" (skipping)
Z-Wave Syncing - failed to retrieve parameter 40 "Switch 1 scenes" (skipping)
Z-Wave Syncing - retrieved parameter 61 "Relay 1 power report threshold" is 1 %
Z-Wave Syncing - retrieved parameter 62 "Relay 1 periodic power reports" is 60 seconds
Z-Wave Syncing - retrieved parameter 65 "Relay 1 energy report threshold" is 5 * 0.01 kWh
Z-Wave Syncing - retrieved parameter 66 "Relay 1 periodic energy reports" is 60 seconds
Z-Wave Syncing - retrieved parameter 60 "Include internal usage in power reports for relay 1" is true
Z-Wave Syncing - failed to retrieve parameter 151 "Switch 2 mode" (skipping)
Z-Wave Syncing - failed to retrieve parameter 153 "Switch 2 behavior" (skipping)
Z-Wave Syncing - failed to retrieve parameter 16 "Switch 2 behavior" (skipping)
Z-Wave Syncing - failed to retrieve parameter 155 "Switch 2 duration" (skipping)
Z-Wave Syncing - failed to retrieve parameter 41 "Switch 2 scenes" (skipping)
Z-Wave Syncing - failed to retrieve parameter 63 "Relay 2 power report threshold" (skipping)
Z-Wave Syncing - failed to retrieve parameter 64 "Relay 2 periodic power reports" (skipping)
Z-Wave Syncing - failed to retrieve parameter 67 "Relay 2 energy report threshold" (skipping)
Z-Wave Syncing - failed to retrieve parameter 68 "Relay 2 periodic energy reports" (skipping)
Z-Wave Syncing - failed to retrieve parameter 24 "Reverse switch controls" (skipping)
Z-Wave Syncing - failed to retrieve parameter 25 "Reverse output operation" (skipping)
Z-Wave Syncing - retrieved parameter 1 "Power up to last known state" is true
Z-Wave Syncing - retrieved parameter 11 "LED frame ON color" is 8 "Smooth Dynamic Based on Power Usage"
Z-Wave Syncing - retrieved parameter 12 "LED frame OFF color" is 0 "OFF"
Z-Wave Syncing - retrieved parameter 13 "LED frame brightness" is 100 "100 - High"
Z-Wave Syncing - retrieved parameter 10 "Power exceeded threshold" is 36800 * 0.1 watts
Z-Wave Syncing - retrieved parameter 2 "Relay 1 power overloaded threshold" is 0 * 0.1 watts
Z-Wave Syncing - failed to retrieve parameter 3 "Relay 2 power overloaded threshold" (skipping)
Z-Wave Syncing - complete
Error client target _autoAssignedId_37 not found for message UiValidate