Qubino RGBW Controller

Posted on
Sun Dec 13, 2020 10:08 am
7rdr7 offline
Posts: 163
Joined: Aug 16, 2017
Location: Washington DC Metro

Re: Qubino RGBW Controller

I'm about to purchase some Qubino RGBW devices as they have some attractive features. I already have a number of Quibino devices and although they are finicky to set up when leveraging all features, they are a good product. This feels like the same multi-channel issue that I have with the Qubino Flush 1D when I want to use the switch, temperature probe, and sensor input together. Is there a fix on the horizon for the multi-channel issue?

Posted on
Sun Dec 13, 2020 1:14 pm
matt (support) offline
Site Admin
User avatar
Posts: 21411
Joined: Jan 27, 2003
Location: Texas

Re: Qubino RGBW Controller

We added support for the basic functionality of the Qubino Flush RGBW Dimmer (ZMNHWD) to Indigo 7.4.1, so it should work. That said, it is definitely another complicated Qubino module, so getting it included, configured, and working might not be "simple." Let us know how it works for you.

Image

Posted on
Sun Dec 13, 2020 1:17 pm
matt (support) offline
Site Admin
User avatar
Posts: 21411
Joined: Jan 27, 2003
Location: Texas

Re: Qubino RGBW Controller

Note also the Flush 1D should be working, I think as of 7.0. If that isn't the case for you then can you describe what you are seeing (or point to the forum thread you are referring to about the multi-channel problem)?

Image

Posted on
Tue Dec 15, 2020 10:16 am
7rdr7 offline
Posts: 163
Joined: Aug 16, 2017
Location: Washington DC Metro

Re: Qubino RGBW Controller

Thanks Matt. I may have my terminology wrong, but was referencing the the include-exclude-include machinations to get all the Qubino features working. I was hoping that there was a more elegant way in the works to include these devices. It seemed like the RGBW device had similar peculiarities to the Flush 1D. That said, the Qubino RGBW and Flush 1D have unique capabilities, so I'll keep using them.... As always, thanks for the quick response!

Posted on
Tue Dec 15, 2020 11:38 am
siclark offline
Posts: 1960
Joined: Jun 13, 2017
Location: UK

Re: Qubino RGBW Controller

Has anyone got the specific end point associations working with these yet?

Posted on
Fri Jan 01, 2021 10:56 am
7rdr7 offline
Posts: 163
Joined: Aug 16, 2017
Location: Washington DC Metro

Re: Qubino RGBW Controller

matt (support) wrote:
We added support for the basic functionality of the Qubino Flush RGBW Dimmer (ZMNHWD) to Indigo 7.4.1, so it should work. That said, it is definitely another complicated Qubino module, so getting it included, configured, and working might not be "simple." Let us know how it works for you.


The Qubino Flush RGBW Dimmer (ZMNHWD) auto included and works as expected with an RGBW strip. BTW, on another note, 7.5 is noticeably faster across devices.

Posted on
Fri Feb 05, 2021 5:16 pm
welchgregusa offline
Posts: 101
Joined: May 29, 2013
Location: Orlando, FL

Re: Qubino RGBW Controller

Matt:

I notice the Z-Wave speedup in 7.5.0 also!

However I am still seeing a need to resync all of my "Qubino Z-Wave Plus RGBW Controller ZMNHWD3" units every time I reboot my Indigo server. (The server is an Intel Mac Mini running macOS 10.15.7 (and Indigo 7.5.0.) Not debilitating but a nuisance, and puzzling. I can't figure out if it's Qubino, Aeotec (Z-Stick), or Indigo, or some combination.

I know you guys have limited cycles, but if me sending you a unit (purchase and have it delivered to you) would help, i.e. if you thought you might find time to try it but don't have one, I could do that.

Thanks,
--greg

Posted on
Sat Feb 06, 2021 6:17 pm
matt (support) offline
Site Admin
User avatar
Posts: 21411
Joined: Jan 27, 2003
Location: Texas

Re: Qubino RGBW Controller

Hi Greg,

After looking at your previous Event Log posts again, I'm thinking this is an Indigo bug related to how the device defined is dynamic (it can be either a normal dimmer, or an RGB device). I'll look into this some more ASAP and get you a beta version of Indigo's Z-Wave Library to try.

Image

Posted on
Sat Feb 06, 2021 6:29 pm
welchgregusa offline
Posts: 101
Joined: May 29, 2013
Location: Orlando, FL

Re: Qubino RGBW Controller

Wow! That sounds encouraging. Thank you for any time you can spend on it!!

Posted on
Thu Mar 18, 2021 2:48 pm
7rdr7 offline
Posts: 163
Joined: Aug 16, 2017
Location: Washington DC Metro

Re: Qubino RGBW Controller

I've noticed the same behavior with my Qubino RGBW Controller.

Posted on
Tue Mar 30, 2021 7:02 am
welchgregusa offline
Posts: 101
Joined: May 29, 2013
Location: Orlando, FL

Re: Qubino RGBW Controller

@Matt: I just realized something that might (or might not...) be useful or interesting. It seems the Z-Wave connection is actually still working, at least in part, after a reboot. Specifically I just realized that when I reboot the server, the "Turn On" and "Turn Off" buttons of the device actually DO work (the LEDs go on and off), but the "W" (white) slider/dimmer does NOT, and the "RGB" color choosing mechanisms do NOT. The UI elements for those mechanisms (W and RGB) seem to "snap back" to 0/null whenever I change them, and the LEDs never seem to go on. BTW, I'm running Indigo 7.5.0.

As always, thanks.

Posted on
Wed Apr 07, 2021 7:02 pm
7rdr7 offline
Posts: 163
Joined: Aug 16, 2017
Location: Washington DC Metro

Re: Qubino RGBW Controller

I have a similar experience, and a sync seems to clear it.

Apr 7, 2021 at 8:56:07 PM
Z-Wave connection reset requested
Z-Wave connected to Z-Stick Gen5 (ZW090) interface on /dev/cu.usbmodem14301 (firmware 1.01, minimum SDK 6.51.06)
Z-Wave Error module 036 included in controller does not match device "Kitchen Cabinet Lights" type (controller module type: zwDimmerType/zwDimmerType (4, 17, 1), indigo device type: zwColorDimmerType (4, 17, 1))
Apr 7, 2021 at 8:58:20 PM
Z-Wave Syncing - started for "Kitchen Cabinet Lights"
Z-Wave Syncing - retrieved module neighbors list: 9, 10, 11, 13, 17, 18, 33, 45, 51, 62, 108, 118, 126, 134, 135, 156, 157, 177, 179, 185, 186, 217, 222, 224, 228, 229, 231
Z-Wave Syncing - assigning return route to "036 - Kitchen Cabinet Lights"
Z-Wave Syncing - assigned return route
Z-Wave Syncing - retrieved manufacture and model names: Qubino - 0159, Flush RGBW Dimmer (ZMNHWD) - 00010054
Z-Wave Syncing - retrieved protocol version 4.24, app version 2.98
Z-Wave Syncing - retrieved class hierarchy: Routing Slave : Mulitlevel Switch : Dimmable Power Switch (04 : 11 : 01, base 26)
Z-Wave Syncing - retrieved command classes: 20v1 85v1 73v1 26v2 86v1 27v1 70v1 72v1 33v2 59v1 7Av1 5Av1 5Ev1 25v1
Z-Wave Syncing - retrieved encrypt commands: - none -
Z-Wave Syncing - retrieved capabilities: routing, beaming
Z-Wave Syncing - retrieved group 1 associations: [1]
Z-Wave Syncing - group 1 association to interface already exists (skipping)
Z-Wave Syncing - retrieved parameter 7 "Power up state" is 0 "Off"
Z-Wave Syncing - retrieved parameter 14 "Dimmers mode" is 0 "Single RGBW Color Device"
Z-Wave Syncing - retrieved parameter 1 "Input 1 mode" is 8 "Scene - Momentary Switch Type"
Z-Wave Syncing - retrieved parameter 2 "Input 2 mode" is 4 "Brightness - Momentary Switch Type"
Z-Wave Syncing - retrieved parameter 3 "Input 3 mode" is 4 "Brightness - Momentary Switch Type"
Z-Wave Syncing - retrieved parameter 4 "Input 4 mode" is 7 "Rainbow - Momentary Switch Type"
Z-Wave Syncing - retrieved parameter 5 "Auto scene mode" is 4 "Snow - Flowing Shades of White and Cyan"
Z-Wave Syncing - retrieved parameter 6 "Auto scene duration" is 3 "3 Seconds"
Z-Wave Syncing - retrieved parameter 11 "Minimum value" is 1
Z-Wave Syncing - retrieved parameter 10 "Maximum value" is 99
Z-Wave Syncing - retrieved parameter 12 "Button tap duration" is 10 * 100 milliseconds
Z-Wave Syncing - retrieved parameter 13 "Button down duration" is 3 seconds
Z-Wave Syncing - complete
Z-Wave sent "Kitchen Cabinet Lights" status request

Posted on
Sat Apr 10, 2021 1:48 pm
matt (support) offline
Site Admin
User avatar
Posts: 21411
Joined: Jan 27, 2003
Location: Texas

Re: Qubino RGBW Controller

Thanks for the updates and additional reports. We'll definitely get this fixed.

Image

Posted on
Sat Apr 17, 2021 12:29 pm
7rdr7 offline
Posts: 163
Joined: Aug 16, 2017
Location: Washington DC Metro

Re: Qubino RGBW Controller

Thanks Matt!

Posted on
Sat Jun 19, 2021 1:41 pm
7rdr7 offline
Posts: 163
Joined: Aug 16, 2017
Location: Washington DC Metro

Re: Qubino RGBW Controller

Hey Matt, I loaded the new release today. I noticed that this issue is still there. Was it fixed? If so, do I need to delete and re-include the Qubino RGBW device? Thanks.

Who is online

Users browsing this forum: No registered users and 3 guests