response to command 0561
Posted: Mon May 24, 2021 4:05 am
Hi, I'm using an IT-100 with my DSC. The usb to serial I have is from eBay "FTDI FT232 USB to Serial RS232 COM Converter Adapter Cable For MAC M1" . I did try another usb to serial device I have but that didn't come up in the list of tty devices so I bought this one.
Anyway, on load it gives the error as below. I've seen a couple other posts on this, which basically say try a different USB 2 Serial or get an EVL - 4.
Is there any troubleshooting I could try first before I buy something else?
https://www.ebay.com.au/itm/274222545552
Anyway, on load it gives the error as below. I've seen a couple other posts on this, which basically say try a different USB 2 Serial or get an EVL - 4.
Is there any troubleshooting I could try first before I buy something else?
https://www.ebay.com.au/itm/274222545552
- Code: Select all
24 May 2021 at 7:46:38 pm
DSC Alarm Initializing communication on port /dev/cu.usbserial-A50285BI
DSC Alarm Communication established
DSC Alarm Error Timed out after waiting for response to command 0561 for 3 seconds, retrying.
DSC Alarm Error Timed out after waiting for response to command 0561 for 3 seconds, retrying.
DSC Alarm Error Timed out after waiting for response to command 0561 for 3 seconds, retrying.
DSC Alarm Error Resent command 0561 3 times with no success, aborting.
DSC Alarm Error Error enabling Time Broadcast.
DSC Alarm Plugin will attempt to re-initialize again in 3 minutes.