Zone Bypass
Posted: Thu Mar 02, 2017 7:47 pm
Thanks for a great plugin.
I am not able to get the bypass state of any Zone recognised:
- whether the zone is bypassed automatically (because stay has been chosen)
- or bypassed manually using the *1
The zone is actually bypassed using these methods but the status of the zone is not shown as bypassed. Curiously the partition recognises that a zone has been bypassed on either method, as the plugin bypass LED indicates that a zone in the partition is bypassed.
I have also tried using the action "Bypass a Zone" and get the error that a code is required. Same error for Clearing bypass. I know I can change the protocols in the DSC to not require the code, however it would be preferable if the plugin used the disarm code set up in the config. That may require an option in the config that a code is required.
Thanks in advance.
Marcus Bleasel
Mac OS 10.12.3
Indigo 7.03
DSC plugin v 2.1.0
Envisalink 3 - Firmware 01.12.180 - MAC
DSC PC1864
I am not able to get the bypass state of any Zone recognised:
- whether the zone is bypassed automatically (because stay has been chosen)
- or bypassed manually using the *1
The zone is actually bypassed using these methods but the status of the zone is not shown as bypassed. Curiously the partition recognises that a zone has been bypassed on either method, as the plugin bypass LED indicates that a zone in the partition is bypassed.
I have also tried using the action "Bypass a Zone" and get the error that a code is required. Same error for Clearing bypass. I know I can change the protocols in the DSC to not require the code, however it would be preferable if the plugin used the disarm code set up in the config. That may require an option in the config that a code is required.
Thanks in advance.
Marcus Bleasel
Mac OS 10.12.3
Indigo 7.03
DSC plugin v 2.1.0
Envisalink 3 - Firmware 01.12.180 - MAC
DSC PC1864