v2.0 Bugs

Posted on
Sun Aug 21, 2016 1:54 am
durosity offline
User avatar
Posts: 3810
Joined: May 10, 2012
Location: Newcastle Upon Tyne, Ye Ol' England.

Re: v2.0 Bugs

I'll try these out shortly! Thanks for the reply :)

Computer says no.

Posted on
Fri Sep 02, 2016 7:54 am
durosity offline
User avatar
Posts: 3810
Joined: May 10, 2012
Location: Newcastle Upon Tyne, Ye Ol' England.

Re: v2.0 Bugs

Hi,

Sorry I wasn't able to reply quicker.. had horrible problems with my foot which meant I've not been able to run back and forth to a machine and the keyswitch. Here's the intense log I get when enabling/disarming the alarm using the key switch:

Code: Select all
  DSC Alarm Debug                 RX: 90400330
  DSC Alarm Debug                 Beep Status
  DSC Alarm Debug                 RX: 6561D2
  DSC Alarm                       Exit Delay. (Partition 1 'House')
  DSC Alarm Debug                 Updating state state for keypad on partition 1 to exitDelay.
  DSC Alarm Debug                 Updating state LEDArmed for keypad on partition 1 to on.
  DSC Alarm Debug                 Updating state LEDMemory for keypad on partition 1 to off.
  DSC Alarm Debug                 ID: speakTextArming
  DSC Alarm Debug                 RX: 90321FF
  DSC Alarm Debug                 LED 'Armed' is 'on'.
  DSC Alarm Debug                 Updating state LEDArmed for keypad on partition 1 to on.
  DSC Alarm Debug                 RX: 9034101
  DSC Alarm Debug                 LED 'Bypass' is 'on'.
  DSC Alarm Debug                 Updating state LEDBypass for keypad on partition 1 to on.
  DSC Alarm Debug                 RX: 90100032Exit Delay in   Progress        E4
  DSC Alarm Debug                 LCD Update, Line 1:'Exit Delay in   ' Line 2:'Progress        '
  DSC Alarm Debug                 Updating state LCDLine1 for keypad on partition 0 to Exit Delay in   .
  DSC Alarm Debug                 Updating state LCDLine2 for keypad on partition 0 to Progress        .
  DSC Alarm Debug                 RX: 6100032A
  DSC Alarm Debug                 Zone number 3 Closed.
  DSC Alarm Debug                 RX: 905010160
  DSC Alarm Debug                 Tone Status
  DSC Alarm Debug                 RX: 9034000
  DSC Alarm Debug                 LED 'Bypass' is 'off'.
  DSC Alarm Debug                 Updating state LEDBypass for keypad on partition 1 to off.
  DSC Alarm Debug                 RX: 61000128
  DSC Alarm Debug                 Zone number 1 Closed.
  Trigger                         Motion: Hall - Front Door Closed
  DSC Alarm                       Alarm Zone 'Hall - Front Door Sensor' Closed.
  DSC Alarm Debug                 RX: 905030162
  DSC Alarm Debug                 Tone Status
  DSC Alarm Debug                 RX: 60900736
  DSC Alarm Debug                 Zone number 7 Open.
  Z-Wave                          sent "Garage - Light" on
  DSC Alarm Debug                 RX: 65210FE
  DSC Alarm                       Alarm Panel Armed in Away Mode. (Partition 1 'House')
  DSC Alarm Debug                 Updating state ArmedState for keypad on partition 1 to away.
  Trigger                         Alarm: State Changes
  DSC Alarm Debug                 <<-- entering triggerEvent: armedAway
  Trigger                         Alarm: Armed in Away Mode
  Action Group                    Lighting: Mockupancy On
  Action Group                    Lighting: All Off
  Action Group                    Lounge - Turn All Off (Inc Media)
  Action Group                    Lounge - Turn All Off (Ex Media)
  Action Group                    Lounge - Switch To None (All Off)
  Action Group                    Cameras: Make All Active
  Ignored                         device "Lounge - Camera" action request (communication is disabled)
  Action Group                    Heating: Set All Away
  DSC Alarm Debug                 Updating state state for keypad on partition 1 to armed.
  DSC Alarm Debug                 Updating state ReadyState for keypad on partition 1 to notready.
  DSC Alarm Debug                 Updating state LEDReady for keypad on partition 1 to off.
  DSC Alarm Debug                 Updating state LEDArmed for keypad on partition 1 to on.
  DSC Alarm Debug                 ID: speakTextArmed
  DSC Alarm Debug                 RX: 6100072E
  DSC Alarm Debug                 Zone number 7 Closed.
  Z-Wave                          sent "Lounge - Main Light" off
  Z-Wave                          sent "Lounge - Side Lights" off
  Z-Wave                          sent "Lounge - Ambient Lights" off
  DSC Alarm Debug                 RX: 90310FD
  DSC Alarm Debug                 LED 'Ready' is 'off'.
  DSC Alarm Debug                 Updating state LEDReady for keypad on partition 1 to off.
  DSC Alarm Debug                 RX: 90100032System Armed    in Away Mode  <>85
  DSC Alarm Debug                 LCD Update, Line 1:'System Armed   ' Line 2:' in Away Mode   '
  DSC Alarm Debug                 Updating state LCDLine1 for keypad on partition 0 to System Armed   .
  DSC Alarm Debug                 Updating state LCDLine2 for keypad on partition 0 to  in Away Mode   .
  DSC Alarm Debug                 RX: 55014480902169D
  DSC Alarm Debug                 Alarm panel time is within 1 minute of actual time, no update necessary.
  DSC Alarm Debug                 RX: 90500005E
  DSC Alarm Debug                 Tone Status
  DSC Alarm Debug                 RX: 60900736
  DSC Alarm Debug                 Zone number 7 Open.
  Z-Wave                          sent "Garage - Light" on
  Autolog Stella-Z                Heat setpoint altered to 19.0 for 'Lounge - Heating Control'
  Schedule                        Alarm: Armed in Away Mode (delayed action)
  Autolog Stella-Z                Heat setpoint altered to 18.0 for 'Dining - Heating Control'
  Schedule                        Alarm: Armed in Away Mode (delayed action)
  DSC Alarm Debug                 RX: 6100072E
  DSC Alarm Debug                 Zone number 7 Closed.
  Autolog Stella-Z                Heat setpoint altered to 14.0 for 'Utility - Heating Control'
  Schedule                        Alarm: Armed in Away Mode (delayed action)
  Action Group                    Bedroom 1 - Mood: All Lights Off (Inc Media)
  Schedule                        Alarm: Armed in Away Mode (delayed action)
  Script Error                    embedded script: expected an indented block
  Script Error                    around line 1 - "#turn off tv"
  Z-Wave                          sent "Bedroom 1 - Mike's Light" off
  Z-Wave                          sent "Bedroom 1 - Claire's Light" off
  Z-Wave                          sent "Bedroom 1 - Main Light" off
  DSC Alarm Debug                 RX: 60900736
  DSC Alarm Debug                 Zone number 7 Open.
  Z-Wave                          sent "Garage - Light" on
  DSC Alarm Debug                 RX: 55014480902169D
  DSC Alarm Debug                 Alarm panel time is within 1 minute of actual time, no update necessary.
  DSC Alarm Debug                 RX: 7011C9
  DSC Alarm                       Alarm Panel Specially Armed. (Partition 1 'House')
  DSC Alarm Debug                 Updating state state for keypad on partition 1 to armed.
  DSC Alarm Debug                 Updating state ReadyState for keypad on partition 1 to notready.
  DSC Alarm Debug                 Updating state LEDReady for keypad on partition 1 to off.
  DSC Alarm Debug                 Updating state LEDArmed for keypad on partition 1 to on.
  DSC Alarm Debug                 ID: speakTextArmed
  Schedule                        Alarm: Armed in Away Mode (delayed action)
  DSC Alarm Debug                 RX: 55014480902169D
  DSC Alarm Debug                 Alarm panel time is within 1 minute of actual time, no update necessary.
  Autolog Stella-Z                Heat setpoint altered to 14.0 for 'Bathroom - Heating Control'
  Schedule                        Alarm: Armed in Away Mode (delayed action)
  Autolog Stella-Z                Heat setpoint altered to 14.0 for 'Bedroom 2 - Heating Control'
  Autolog Stella-Z                Heat setpoint altered to 14.0 for 'Study - Heating Control'
  Schedule                        Alarm: Armed in Away Mode (delayed action)
  Action Group                    Kitchen Diner - Mood - Turn Off All Lights
  Schedule                        Alarm: Armed in Away Mode (delayed action)
  Schedule                        Alarm: Armed in Away Mode (delayed action)
  Z-Wave                          sent "Kitchen - Worktop Counter Lights" off
  Z-Wave                          sent "Kitchen - Main Light" off
  Autolog Stella-Z                Heat setpoint altered to 10.0 for 'Gym - Heating Control'
  Autolog Stella-Z                Heat setpoint altered to 10.0 for 'WC - Heating Control'
  Schedule                        Alarm: Armed in Away Mode (delayed action)
  DSC Alarm Debug                 RX: 6100072E
  DSC Alarm Debug                 Zone number 7 Closed.
  Z-Wave                          sent "Dining - Main Light" off
  DSC Alarm Debug                 RX: 60900736
  DSC Alarm Debug                 Zone number 7 Open.
  Z-Wave                          sent "Garage - Light" on
  Schedule                        Alarm: Armed in Away Mode (delayed action)
  Action Group                    Landing - Turn Off All Lights
  Z-Wave                          sent "Landing - Light" off
  DSC Alarm Debug                 RX: 90100032  Date     Time SEP 02/16  2:48p24
  DSC Alarm Debug                 LCD Update, Line 1:'  Date     Time ' Line 2:'SEP 02/16  2:48p'
  DSC Alarm Debug                 Updating state LCDLine1 for keypad on partition 0 to   Date     Time .
  DSC Alarm Debug                 Updating state LCDLine2 for keypad on partition 0 to SEP 02/16  2:48p.
  DSC Alarm Debug                 RX: 6100072E
  DSC Alarm Debug                 Zone number 7 Closed.
  DSC Alarm Debug                 RX: 60900736
  DSC Alarm Debug                 Zone number 7 Open.
  Z-Wave                          sent "Garage - Light" on
  Schedule                        Alarm: Armed in Away Mode (delayed action)
  Action Group                    Loft - Turn Off All Lights
  Z-Wave                          sent "Loft - Lighting" off
  DSC Alarm Debug                 RX: 6100072E
  DSC Alarm Debug                 Zone number 7 Closed.
  Ignored                         device "Bedroom 1 - Heating Control" action request (communication is disabled)
  DSC Alarm Debug                 RX: 60900736
  DSC Alarm Debug                 Zone number 7 Open.
  Z-Wave                          sent "Garage - Light" on
  DSC Alarm Debug                 RX: 6100072E
  DSC Alarm Debug                 Zone number 7 Closed.

2 Sep 2016, 14:49:19
  DSC Alarm Debug                 RX: 60900736
  DSC Alarm Debug                 Zone number 7 Open.
  Z-Wave                          sent "Garage - Light" on
  DSC Alarm Debug                 RX: 6100072E
  DSC Alarm Debug                 Zone number 7 Closed.
  DSC Alarm Debug                 RX: 60900736
  DSC Alarm Debug                 Zone number 7 Open.
  Z-Wave                          sent "Garage - Light" on
  DSC Alarm Debug                 RX: 6100072E
  DSC Alarm Debug                 Zone number 7 Closed.
  DSC Alarm Debug                 RX: 60900736
  DSC Alarm Debug                 Zone number 7 Open.
  Z-Wave                          sent "Garage - Light" on
  DSC Alarm Debug                 RX: 6100072E
  DSC Alarm Debug                 Zone number 7 Closed.
  DSC Alarm Debug                 RX: 60900736
  DSC Alarm Debug                 Zone number 7 Open.
  Z-Wave                          sent "Garage - Light" on
  DSC Alarm Debug                 RX: 6100072E
  DSC Alarm Debug                 Zone number 7 Closed.
  DSC Alarm Debug                 RX: 90100032  Date     Time SEP 02/16  2:49p25
  DSC Alarm Debug                 LCD Update, Line 1:'  Date     Time ' Line 2:'SEP 02/16  2:49p'
  DSC Alarm Debug                 Updating state LCDLine1 for keypad on partition 0 to   Date     Time .
  DSC Alarm Debug                 Updating state LCDLine2 for keypad on partition 0 to SEP 02/16  2:49p.
  DSC Alarm Debug                 RX: 60900736
  DSC Alarm Debug                 Zone number 7 Open.
  Z-Wave                          sent "Garage - Light" on
  DSC Alarm Debug                 RX: 6100072E
  DSC Alarm Debug                 Zone number 7 Closed.
  DSC Alarm Debug                 RX: 60900736
  DSC Alarm Debug                 Zone number 7 Open.
  Z-Wave                          sent "Garage - Light" on
  DSC Alarm Debug                 RX: 6100072E
  DSC Alarm Debug                 Zone number 7 Closed.
  DSC Alarm Debug                 RX: 60900736
  DSC Alarm Debug                 Zone number 7 Open.
  Z-Wave                          sent "Garage - Light" on
  Schedule                        _delayed_action_2926
  Schedule                        _delayed_action_2928
  Z-Wave                          sent "Kitchen - Worktop Counter Lights" off
  Z-Wave                          sent "Kitchen - Main Light" off
  DSC Alarm Debug                 RX: 6100072E
  DSC Alarm Debug                 Zone number 7 Closed.
  DSC Alarm Debug                 RX: 60900736
  DSC Alarm Debug                 Zone number 7 Open.
  Z-Wave                          sent "Garage - Light" on
  DSC Alarm Debug                 RX: 6100072E
  DSC Alarm Debug                 Zone number 7 Closed.
  DSC Alarm Debug                 RX: 60900736
  DSC Alarm Debug                 Zone number 7 Open.
  Z-Wave                          sent "Garage - Light" on
  DSC Alarm Debug                 RX: 6100072E
  DSC Alarm Debug                 Zone number 7 Closed.
  DSC Alarm Debug                 RX: 60900736
  DSC Alarm Debug                 Zone number 7 Open.
  Z-Wave                          sent "Garage - Light" on
  DSC Alarm Debug                 RX: 6100072E
  DSC Alarm Debug                 Zone number 7 Closed.
  DSC Alarm Debug                 RX: 60900736
  DSC Alarm Debug                 Zone number 7 Open.
  Z-Wave                          sent "Garage - Light" on
  DSC Alarm Debug                 RX: 6100072E
  DSC Alarm Debug                 Zone number 7 Closed.
  DSC Alarm Debug                 RX: 60900130
  DSC Alarm Debug                 Zone number 1 Open.
  DSC Alarm                       Alarm Zone 'Hall - Front Door Sensor' Opened.
  DSC Alarm Debug                 RX: 6571D3
  DSC Alarm                       Entry Delay. (Partition 1 'House')
  DSC Alarm Debug                 Updating state state for keypad on partition 1 to entryDelay.
  DSC Alarm Debug                 ID: speakTextEntryDelay
  DSC Alarm Debug                 RX: 90100032Entry is Active Disarm System   9E
  DSC Alarm Debug                 LCD Update, Line 1:'Entry is Active ' Line 2:'Disarm System   '
  DSC Alarm Debug                 Updating state LCDLine1 for keypad on partition 0 to Entry is Active .
  DSC Alarm Debug                 Updating state LCDLine2 for keypad on partition 0 to Disarm System   .
  DSC Alarm Debug                 RX: 90510005F
  DSC Alarm Debug                 Tone Status
  DSC Alarm Debug                 RX: 60900332
  DSC Alarm Debug                 Zone number 3 Open.
  DSC Alarm Debug                 RX: 6100032A
  DSC Alarm Debug                 Zone number 3 Closed.
  DSC Alarm Debug                 RX: 60900332
  DSC Alarm Debug                 Zone number 3 Open.
  DSC Alarm Debug                 RX: 90400330
  DSC Alarm Debug                 Beep Status
  DSC Alarm Debug                 RX: 6551D1
  DSC Alarm Debug                 Updating state state for keypad on partition 1 to disarmed.
  Trigger                         Alarm: Disarmed
  Action Group                    Lighting: Mockupancy Off
  Action Group                    Heating: Set All General
  DSC Alarm Debug                 Updating state ArmedState for keypad on partition 1 to disarmed.
  Ignored                         device "Gym - Main Light" action request (communication is disabled)
  Trigger                         Alarm: State Changes
  DSC Alarm Debug                 Updating state LEDArmed for keypad on partition 1 to off.
  DSC Alarm Debug                 Updating state PanicState for keypad on partition 0 to none.
  DSC Alarm Debug                 Updating state ReadyState for keypad on partition 1 to ready.
  DSC Alarm Debug                 Updating state LEDReady for keypad on partition 1 to on.
  DSC Alarm Debug                 Updating state LEDBypass for keypad on partition 1 to off.
  DSC Alarm Debug                 RX: 90311FE
  DSC Alarm Debug                 LED 'Ready' is 'on'.
  DSC Alarm Debug                 Updating state LEDReady for keypad on partition 1 to on.
  DSC Alarm Debug                 RX: 90320FE
  DSC Alarm Debug                 LED 'Armed' is 'off'.
  DSC Alarm Debug                 Updating state LEDArmed for keypad on partition 1 to off.
  Z-Wave                          sent "Bedroom 1 - Claire's Light" off
  DSC Alarm Debug                 RX: 90100032System Disarmed No Alarm Memory 00
  DSC Alarm Debug                 LCD Update, Line 1:'System Disarmed ' Line 2:'No Alarm Memory '
  DSC Alarm Debug                 Updating state LCDLine1 for keypad on partition 0 to System Disarmed .
  DSC Alarm Debug                 Updating state LCDLine2 for keypad on partition 0 to No Alarm Memory .
  Z-Wave                          sent "Ensuite - Light" off
  Z-Wave                          sent "Study - Desk Light" off
  Z-Wave                          sent "Landing - Light" off
  Z-Wave                          sent "Bathroom - Light" off
  DSC Alarm Debug                 RX: 55014490902169E
  DSC Alarm Debug                 Alarm panel time is within 1 minute of actual time, no update necessary.
  DSC Alarm Debug                 RX: 90500005E
  DSC Alarm Debug                 Tone Status
  Autolog Stella-Z                Heat setpoint altered to 20.0 for 'Lounge - Heating Control'
  DSC Alarm Debug                 RX: 55014490902169E
  DSC Alarm Debug                 Alarm panel time is within 1 minute of actual time, no update necessary.
  Schedule                        Alarm: Disarmed (delayed action)
  DSC Alarm Debug                 RX: 7511CE
  DSC Alarm                       Alarm Disarmed by Special Opening (Partition 1 'House')
  Autolog Stella-Z                Heat setpoint altered to 18.5 for 'Dining - Heating Control'
  Schedule                        Alarm: Disarmed (delayed action)
  Autolog Stella-Z                Heat setpoint altered to 14.0 for 'Utility - Heating Control'
  Schedule                        Alarm: Disarmed (delayed action)
  Autolog Stella-Z                Heat setpoint altered to 14.0 for 'Bathroom - Heating Control'
  Schedule                        Alarm: Disarmed (delayed action)
  DSC Alarm Debug                 RX: 6531CF
  DSC Alarm Debug                 RX: 90100032Secure or       Arm System    <>96
  DSC Alarm Debug                 LCD Update, Line 1:'Secure or      ' Line 2:' Arm System     '
  DSC Alarm Debug                 Updating state LCDLine1 for keypad on partition 0 to Secure or      .
  DSC Alarm Debug                 Updating state LCDLine2 for keypad on partition 0 to  Arm System     .
  DSC Alarm Debug                 RX: 60902536
  DSC Alarm Debug                 Zone number 25 Open.
  Autolog Stella-Z                Heat setpoint altered to 14.0 for 'Bedroom 2 - Heating Control'
  Schedule                        Alarm: Disarmed (delayed action)
  DSC Alarm Debug                 RX: 6100032A
  DSC Alarm Debug                 Zone number 3 Closed.
  Autolog Stella-Z                Heat setpoint altered to 14.0 for 'Study - Heating Control'
  Schedule                        Alarm: Disarmed (delayed action)
  DSC Alarm Debug                 RX: 60903739
  DSC Alarm Debug                 Zone number 37 Open.
  Schedule                        Alarm: Disarmed (delayed action)
  Autolog Stella-Z                Heat setpoint altered to 10.0 for 'Gym - Heating Control'
  Autolog Stella-Z                Heat setpoint altered to 14.0 for 'WC - Heating Control'
  DSC Alarm Debug                 RX: 6100252E
  DSC Alarm Debug                 Zone number 25 Closed.
  DSC Alarm Debug                 RX: 90100032  Date     Time SEP 02/16  2:50p1D
  DSC Alarm Debug                 LCD Update, Line 1:'  Date     Time ' Line 2:'SEP 02/16  2:50p'
  DSC Alarm Debug                 Updating state LCDLine1 for keypad on partition 0 to   Date     Time .
  DSC Alarm Debug                 Updating state LCDLine2 for keypad on partition 0 to SEP 02/16  2:50p.
  DSC Alarm Debug                 RX: 61003731
  DSC Alarm Debug                 Zone number 37 Closed.

Computer says no.

Posted on
Fri Sep 02, 2016 7:55 am
durosity offline
User avatar
Posts: 3810
Joined: May 10, 2012
Location: Newcastle Upon Tyne, Ye Ol' England.

Re: v2.0 Bugs

And this is what I get when turning the keypad chime ON:


2 Sep 2016, 14:54:57
DSC Alarm Debug RX: 60903739
DSC Alarm Debug Zone number 37 Open.
DSC Alarm Debug RX: 60902536
DSC Alarm Debug Zone number 25 Open.
DSC Alarm Debug RX: 61003731
DSC Alarm Debug Zone number 37 Closed.
DSC Alarm Debug RX: 6100252E
DSC Alarm Debug Zone number 25 Closed.
DSC Alarm Debug RX: 90400330
DSC Alarm Debug Beep Status
DSC Alarm Debug RX: 6731D1
DSC Alarm Debug Partition 1 Busy.
DSC Alarm Debug RX: 90310FD
DSC Alarm Debug LED 'Ready' is 'off'.
DSC Alarm Debug Updating state LEDReady for keypad on partition 1 to off.
DSC Alarm Debug RX: 9036103
DSC Alarm Debug LED 'Program' is 'on'.
DSC Alarm Debug RX: 6531CF
DSC Alarm Debug RX: 90311FE
DSC Alarm Debug LED 'Ready' is 'on'.
DSC Alarm Debug Updating state LEDReady for keypad on partition 1 to on.
DSC Alarm Debug RX: 9036002
DSC Alarm Debug LED 'Program' is 'off'.
DSC Alarm Debug RX: 60902536
DSC Alarm Debug Zone number 25 Open.
DSC Alarm Debug RX: 60903739
DSC Alarm Debug Zone number 37 Open.
DSC Alarm Debug RX: 6100252E
DSC Alarm Debug Zone number 25 Closed.
DSC Alarm Debug RX: 61003731
DSC Alarm Debug Zone number 37 Closed.

Computer says no.

Posted on
Fri Sep 02, 2016 10:39 am
Monstergerm offline
Posts: 155
Joined: Sep 01, 2009

Re: v2.0 Bugs

Regarding keyswitch disarm:
I see that the plugin is receiving disarm commands 655 and 751. The latter is the special keyswitch disarm command. I do not see a trigger coming from this command. Are you using v2.0.6 or later?

Regarding the keypad chime:
Since the IT-100 does not sent Chime Enabled and Disabled commands, all you get is the beep status (which I am not sure is even related to the chime). In other words you can toggle the chime on/off but the plugin cannot track the status.

Posted on
Fri Sep 02, 2016 12:39 pm
durosity offline
User avatar
Posts: 3810
Joined: May 10, 2012
Location: Newcastle Upon Tyne, Ye Ol' England.

Re: v2.0 Bugs

Oh no I missed that update, I'll install and test again shortly!

Computer says no.

Posted on
Wed Sep 07, 2016 8:48 pm
whmoorejr offline
User avatar
Posts: 281
Joined: Jan 15, 2013
Location: Houston, TX

Re: v2.0 Bugs

Running V. 2.06

Noticed a glitch when working with creating triggers on a zone. I don't notice it with zone groups, just zones. Example....

Type: Device State Changed
Device: Z17_Front Motion
-Blank- <-- won't let me select anything, but when I look at the summary of the trigger on the main page, (Trigger: "Z17_Front Motion" state becomes on) In my case, that is what I want the trigger to trigger on, but I don't have an option to select anything else. I turned on Debugging and got this in my log file when ever I select a zone as a device. Again, no errors with DSC groups.

Error (client) ClientMgrProcessThread() caught exception: InternalError -- StreamToXml: wrong value type (expected atomic)
Error (client) timeout waiting for plugin response from com.frightideas.indigoplugin.dscAlarm for request CalcDeviceFunc
Error (client) ClientMgrProcessThread() caught exception: InternalError -- StreamToXml: wrong value type (expected atomic)
Error (client) timeout waiting for plugin response from com.frightideas.indigoplugin.dscAlarm for request CalcDeviceFunc

Posted on
Wed Sep 07, 2016 9:44 pm
whmoorejr offline
User avatar
Posts: 281
Joined: Jan 15, 2013
Location: Houston, TX

Re: v2.0 Bugs

and getting a similar error when I go under devices. When I first select a zone device to edit I get a spinning thinking wheel and a couple lines of errors. I get a couple more lines of errors when I select "Edit Device Settings" and my configured zones show a "Zone Number: - select an item -" (Even though they have been previously selected. I went ahead and re-associated the zone number with the device and got a bunch of green debug lines followed by another series of errors as I closed out the device box.

    Error (client) ClientMgrProcessThread() caught exception: InternalError -- StreamToXml: wrong value type (expected atomic)
    Error (client) timeout waiting for plugin response from com.frightideas.indigoplugin.dscAlarm for request CalcDeviceFunc
    Error (client) ClientMgrProcessThread() caught exception: InternalError -- StreamToXml: wrong value type (expected atomic)
    Error (client) timeout waiting for plugin response from com.frightideas.indigoplugin.dscAlarm for request UiGetValues2

    Sep 7, 2016, 10:34:12 PM
    DSC Alarm Debug validating Device Config called
    Error (client) ClientMgrProcessThread() caught exception: InternalError -- StreamToXml: wrong value type (expected atomic)
    Error (client) timeout waiting for plugin response from com.frightideas.indigoplugin.dscAlarm for request CalcDeviceFunc
    Error (client) ClientMgrProcessThread() caught exception: InternalError -- StreamToXml: wrong value type (expected atomic)
    Received INSTEON "Master Bathroom Light" on

    Sep 7, 2016, 10:34:31 PM
    Received INSTEON "Master Bathroom Light" off

    Sep 7, 2016, 10:35:13 PM
    DSC Alarm Debug validating Device Config called
    DSC Alarm Debug <<-- entering deviceStartComm: new device 2 (1215051652 - alarmZone)
    DSC Alarm Debug Adding occupancyGroup to device new device 2 properties.
    DSC Alarm Debug exiting deviceStartComm -->>
    DSC Alarm Debug <<-- entering deviceStopComm: new device 2 (1215051652 - alarmZone)
    DSC Alarm Debug exiting deviceStopComm -->>
    DSC Alarm Debug <<-- entering deviceStartComm: new device 2 (1215051652 - alarmZone)
    DSC Alarm Debug exiting deviceStartComm -->>
    DSC Alarm Debug <<-- entering deviceStopComm: new device 2 (1215051652 - alarmZone)
    DSC Alarm Debug exiting deviceStopComm -->>
    DSC Alarm Debug <<-- entering deviceStartComm: new device 2 (1215051652 - alarmZone)
    DSC Alarm Debug exiting deviceStartComm -->>
    Error (client) ClientMgrProcessThread() caught exception: InternalError -- StreamToXml: wrong value type (expected atomic)
    Error (client) timeout waiting for plugin response from com.frightideas.indigoplugin.dscAlarm for request UiGetValues2

    Sep 7, 2016, 10:36:01 PM
    DSC Alarm Debug RX: 55022360907169E
    DSC Alarm Debug Alarm panel time is within 1 minute of actual time, no update necessary.
    DSC Alarm Debug Updating state LCDLine1 for keypad on partition 0 to Date Time .
    DSC Alarm Debug Updating state LCDLine2 for keypad on partition 0 to SEP 07/16 10:36p.
    DSC Alarm Debug validating Device Config called
    Error (client) ClientMgrProcessThread() caught exception: InternalError -- StreamToXml: wrong value type (expected atomic)
    Error (client) timeout waiting for plugin response from com.frightideas.indigoplugin.dscAlarm for request CalcDeviceFunc
    Error (client) ClientMgrProcessThread() caught exception: InternalError -- StreamToXml: wrong value type (expected atomic)

Posted on
Thu Sep 08, 2016 8:35 pm
travisc offline
User avatar
Posts: 346
Joined: Sep 07, 2010
Location: Toronto, Canada

Re: v2.0 Bugs

Hmmm. That's a strange one.

I'm assuming this is an upgrade from a previous version?

Posted on
Fri Sep 09, 2016 5:43 am
whmoorejr offline
User avatar
Posts: 281
Joined: Jan 15, 2013
Location: Houston, TX

Re: v2.0 Bugs

Yes. I was on version 1. Something and recently upgraded to 2.06

Unfortunately, I don't remember the last time I messed with any of my DSC alarm triggers and what other system changes I've made between when it was working fine and now.

Posted on
Sat Sep 10, 2016 3:54 pm
Monstergerm offline
Posts: 155
Joined: Sep 01, 2009

Re: v2.0 Bugs

Have you tried restarting the Indigo Server?

I once had a problem with a plugin causing xml errors and it went away after a restart. Also you can try fresh install of plugin and restart of computer.

Posted on
Sat Sep 10, 2016 4:23 pm
whmoorejr offline
User avatar
Posts: 281
Joined: Jan 15, 2013
Location: Houston, TX

Re: v2.0 Bugs

Monstergerm wrote:
Have you tried restarting the Indigo Server?

I once had a problem with a plugin causing xml errors and it went away after a restart. Also you can try fresh install of plugin and restart of computer.


I think I'll try both of those approaches at the same time and go from there.

Posted on
Sat Sep 10, 2016 4:59 pm
whmoorejr offline
User avatar
Posts: 281
Joined: Jan 15, 2013
Location: Houston, TX

Re: v2.0 Bugs

No luck. Disabled V.2.06. Turned off server. Downloaded V2.07. Restarted Server. Installed and enabled V2.07. Same thing

Event log shows the errors when I open a DSC Device and again when I click on "Edit Device Settings"

Error (client) ClientMgrProcessThread() caught exception: InternalError -- StreamToXml: wrong value type (expected atomic)
Error (client) timeout waiting for plugin response from com.frightideas.indigoplugin.dscAlarm for request CalcDeviceFunc
Error (client) ClientMgrProcessThread() caught exception: InternalError -- StreamToXml: wrong value type (expected atomic)
Error (client) timeout waiting for plugin response from com.frightideas.indigoplugin.dscAlarm for request UiGetValues2

Sep 10, 2016, 5:52:01 PM
DSC Alarm Debug RX: 55017520910169A
DSC Alarm Debug Alarm panel time is within 1 minute of actual time, no update necessary.
DSC Alarm Debug Updating state LCDLine1 for keypad on partition 0 to Date Time .
DSC Alarm Debug Updating state LCDLine2 for keypad on partition 0 to SEP 10/16 5:52p.
DSC Alarm Debug validating Device Config called
Error (client) ClientMgrProcessThread() caught exception: InternalError -- StreamToXml: wrong value type (expected atomic)
Error (client) timeout waiting for plugin response from com.frightideas.indigoplugin.dscAlarm for request CalcDeviceFunc
Error (client) ClientMgrProcessThread() caught exception: InternalError -- StreamToXml: wrong value type (expected atomic)


Everything DSC that is already configured is fine and operating normally (existing triggers, control panels, etc). But I can't edit any of them or make any new ones. Friggn' weird.

Posted on
Sun Sep 11, 2016 12:49 am
Monstergerm offline
Posts: 155
Joined: Sep 01, 2009

Re: v2.0 Bugs

This is very weird since it is the xml part. I cannot reproduce the error here. What kind of hardware do you use (D.SC. Panel , interface etc)?
If you downgrade to version 1.x, does the error go away?

Posted on
Sun Sep 11, 2016 9:43 am
whmoorejr offline
User avatar
Posts: 281
Joined: Jan 15, 2013
Location: Houston, TX

Re: v2.0 Bugs

DSC Pannel PC1864 with envisalink EVL3.

any ideas on "expected atomic" ?

In the meantime, I'll try going with a previous version.... any tricks un installing an earlier version? Only asking because I've never done it and I know some software freaks out if you try to go with an older version.

Posted on
Sun Sep 11, 2016 10:07 am
matt (support) offline
Site Admin
User avatar
Posts: 19330
Joined: Jan 27, 2003
Location: Texas

Re: v2.0 Bugs

I'm not sure exactly how that error is occurring. Choose the Indigo 6->About Indigo... menu item – what versions does it show for both the Indigo client and server? Are they the same?

Image

Who is online

Users browsing this forum: No registered users and 1 guest