Not sure when this occurred, but I recently upgraded/migrated my server and Indigo install and have since discovered that Indigo can no longer disarm my alarm.
Mac mini M1, Monterey 12.5.1
Indigo 2022.1.2
Plugin 2022.0.6
Envisalink 4 firmware 01.04.176
I have action groups setup for arm away/stay and disarm, the arming working, but disarm results in an error "Unrecognized command received (Cmd:670 Dat:1 Sum:206)" in the log and the alarm remains armed. In the log below, I armed from Indigo, then attempted to disarm which failed, then disarmed from the physical keypad.
Log sample:
Action Group Alarm - Arm Stay
DSC Alarm Arming Alarm in Stay Mode. (Partition 1 'Default')
DSC Alarm Debug TX: 0311C5
DSC Alarm Debug RX: 50003129
DSC Alarm Debug ACK for cmd 031.
DSC Alarm Debug RX: 5108B10
DSC Alarm Debug Updating Custom State LEDReady for Keypad on Partition 1 to on.
DSC Alarm Debug Updating Custom State LEDArmed for Keypad on Partition 1 to on.
DSC Alarm Debug Updating Custom State LEDTrouble for Keypad on Partition 1 to off.
DSC Alarm Debug Updating Custom State LEDMemory for Keypad on Partition 1 to off.
DSC Alarm Debug Updating Custom State LEDBypass for Keypad on Partition 1 to on.
DSC Alarm Debug RX: 6561D2
DSC Alarm Exit Delay. (Partition 1 'Default')
DSC Alarm Debug Updating Custom State state for Keypad on Partition 1 to exitDelay.
DSC Alarm Debug Updating Custom State LEDArmed for Keypad on Partition 1 to on.
DSC Alarm Debug Updating Custom State LEDMemory for Keypad on Partition 1 to off.
DSC Alarm Debug ID: speakTextArming
Action Group Alarm - Disarm
DSC Alarm Disarming Alarm. (Partition 1 'Default')
DSC Alarm Debug TX: 040112348F
DSC Alarm Debug RX: 50004029
DSC Alarm Debug ACK for cmd 040.
DSC Alarm Debug RX: 6701CE
DSC Alarm Debug Unrecognized command received (Cmd:670 Dat:1 Sum:206)
DSC Alarm Debug RX: 6561D2
DSC Alarm Exit Delay. (Partition 1 'Default')
DSC Alarm Debug Updating Custom State state for Keypad on Partition 1 to exitDelay.
DSC Alarm Debug Updating Custom State LEDArmed for Keypad on Partition 1 to on.
DSC Alarm Debug Updating Custom State LEDMemory for Keypad on Partition 1 to off.
DSC Alarm Debug ID: speakTextArming
DSC Alarm Debug RX: 51081FF
DSC Alarm Debug Updating Custom State LEDReady for Keypad on Partition 1 to on.
DSC Alarm Debug Updating Custom State LEDArmed for Keypad on Partition 1 to off.
DSC Alarm Debug Updating Custom State LEDTrouble for Keypad on Partition 1 to off.
DSC Alarm Debug Updating Custom State LEDMemory for Keypad on Partition 1 to off.
DSC Alarm Debug Updating Custom State LEDBypass for Keypad on Partition 1 to off.
DSC Alarm Debug RX: 6551D1
DSC Alarm Alarm Disarmed during Exit Delay. (Partition 1 'Default')
DSC Alarm Debug Bypass Cancelled for all Zones by DSC
DSC Alarm Debug Updating Custom State state for Keypad on Partition 1 to disarmed.
DSC Alarm Debug Updating Custom State ArmedState for Keypad on Partition 1 to disarmed.
DSC Alarm Debug Updating Custom State LEDArmed for Keypad on Partition 1 to off.
DSC Alarm Debug Updating Custom State PanicState for Keypad on Partition 0 to none.
DSC Alarm Debug Updating Custom State ReadyState for Keypad on Partition 1 to ready.
DSC Alarm Debug Updating Custom State LEDReady for Keypad on Partition 1 to on.
DSC Alarm Debug Updating Custom State LEDBypass for Keypad on Partition 1 to off.
DSC Alarm Debug RX: 6501CC
DSC Alarm Debug Partition 1 Ready
Any help would be appreciated.
Thanks,
Rob