I am getting this error when I turn on the DSC Alarm Plugin.
I have the Debug level set to Intense and this is what the log reports.
Here are the system specs: OS X 10.9.2, Indigo 6.0.11, Envisalink-3 Firmware Version: 01.11.128A, DSC Alarm Plugin 1.5.4, Vista 20p
May 14, 2014, 9:25:03 PM
DSC Alarm Debug validating Prefs called
DSC Alarm Debug STATE: Startup
DSC Alarm Log level preferences changed to "Intense Debug".
DSC Alarm Debug getConfiguration start
DSC Alarm Debug Configuration read successfully
DSC Alarm Initializing communication at address: 192.168.1.20:4025
DSC Alarm Debug RX: Login:
DSC Alarm Error IT-100/Envisalink Error: Received a response with invalid characters
DSC Alarm Debug TX: 005user54
DSC Alarm Debug RX: FAILED
DSC Alarm Error Checksum did not match on a received packet.
DSC Alarm Error Timed out after waiting for response to command 005user for 3 seconds, retrying.
DSC Alarm Debug TX: 005user54
DSC Alarm Error Timed out after waiting for response to command 005user for 3 seconds, retrying.
DSC Alarm Debug TX: 005user54
DSC Alarm Error Timed out after waiting for response to command 005user for 3 seconds, retrying.
DSC Alarm Error Resent command 005user 3 times with no success, aborting.
DSC Alarm Error Timeout waiting for Envisalink to respond to login request.
DSC Alarm Plugin will attempt to re-initialize again in 3 minutes.
Any assistance you can give would be greatly appreciated.