Indigo Domotics

The model ID for your leak sensor is different (even though it is the same model). I just added your ID so it should work in v6.0.12 once it is available. If you want to try it sooner then email me: indigo-support AT perceptiveautomation.com.

Thanks, I just sent e-mail.

Matt,

is a pre-release available of v6.0.12, I thought it was, I had e-mail support yesterday?

Thanks!

Not quite yet. I'll email you more information once it is.

Anyone found where to get a wired probe for it ?

I just got one of these and got it to successfully sync on the first attempt. However, Indigo is saying that there is no device definition (see attached screenshot). I was under the impression that this device was supported by Indigo.

Any thoughts?

Hi Mark,

Re-sync it and copy/paste the Event Log results into a reply for us. And what specific model number is shown on the module?

Here you go. The box says "Flood Sensor FGFS-101 ZW5 v3.2"

Code: Select all

Apr 8, 2018, 7:41:00 PM
   Schedule                        Date & Time Update
   Z-Wave                          Syncing - started for "Kitchen Sink - Fibaro Flood Sensor"
   Z-Wave                          Syncing - retrieved module neighbors list: 2, 3, 4, 5, 6, 7, 8, 15, 19, 20
   Z-Wave                          Syncing - assigning return route to "021 - Kitchen Sink - Fibaro Flood Sensor"
   Z-Wave                          Syncing - assigned return route
   Z-Wave                          Syncing - retrieved manufacture and model names: Fibaro System - 010F, Notification Sensor - 0B012002
   Z-Wave                          Syncing - retrieved protocol version 4.05, app version 3.02
   Z-Wave                          Syncing - retrieved class hierarchy: Routing Slave : Notification Sensor : Notification Sensor (04 : 07 : 01, base 00)
   Z-Wave                          Syncing - retrieved command classes: 80v1 84v2 85v1 86v1 8Ev1 56v1 98v1 59v1 5Av1 9Cv1 5Ev1 20v1 22v1 71v1 70v1 31v5 72v1 73v1 7Av1
   Z-Wave                          Syncing - retrieved encrypt commands: - none -
   Z-Wave                          Syncing - retrieved capabilities: routing, battery, beaming, security, waking
   Z-Wave                          Syncing - retrieved wake interval of 60 minutes
   Z-Wave                          Syncing - device "021 - Kitchen Sink - Fibaro Flood Sensor" wake interval changed to 60 minutes
   Z-Wave                          Syncing - retrieved group 1 associations: [1]
   Z-Wave                          Syncing - retrieved group 2 associations: []
   Z-Wave                          Syncing - retrieved group 3 associations: []
   Z-Wave                          Syncing - retrieved group 4 associations: []
   Z-Wave                          Syncing - group 1 association to interface already exists (skipping)
   Z-Wave                          Syncing - retrieved battery level of 100%
   Z-Wave                          Syncing - complete
   Z-Wave                          sent "Kitchen Sink - Fibaro Flood Sensor" status request
   Z-Wave                          received "021 - Kitchen Sink - Fibaro Flood Sensor" status update battery level 100%

Apr 8, 2018, 7:41:41 PM
   Z-Wave                          received "021 - Kitchen Sink - Fibaro Flood Sensor" status update battery level 100%

Looks like that one is using a different model ID than the previous ones we've had reported. I've added it to the next bug fix release (7.1.2).

Matt,

Thank you for your extremely fast support! That sounds great. I am assuming it will work by default then with that release.

Appreciate it, as always.

Indigo 7.2.0 is now available for download and has the new Fibaro Leak Sensor (FGFS101) definition.

Hello!

I still can’t get this to work in Indigo 7.2. Did a new inclusion and a new define and sync but with no luck. Any suggestions?

Fibaro flood sensor -101 v3.3 EU

From the log:

Z-Wave Indigo Device "Fibaro_flood_sensor" Z-Wave Properties:
Indigo Z-Wave Version: 2.0.119
Node ID: 62
Model: Notification Sensor
Model ID: 0B011003
Manufacturer: Fibaro System
Manufacturer ID: 010F
Protocol Version: 4.24
Application Version: 3.03
Model Definition Version: 0
Library Type: 3
Class Name: Notification Sensor
Class Hierarchy: 04 : 07 : 01
Command Class Base: 00
Command Versions: 80v1 84v2 85v1 86v1 8Ev1 56v1 98v1 59v1 5Av1 9Cv1 5Ev1 20v1 22v1 71v1 70v1 31v5 72v1 73v1 7Av1
Encryption Status: Supported but not Enabled
Multi-Endpoint Types: - none -
Multi-Endpoint Classes: - none -
Multi-Instance Counts: - none -
Features: routing, battery, beaming, security, waking
Neighbors: 2, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 23, 24, 25, 26, 27, 37, 38, 39, 55, 61
Associations: 1:[1] 2:[] 3:[] 4:[]
Config Values: - none -

SST wrote:

Model ID: 0B011003

That is a different model ID than the ones previously reported. We'll add that particular one to the next bug fix release (7.2.1).

Indigo 7.3 (and 7.3.1) are now available and have support for the new variant of Fibaro Leak Sensor (FGFS101 and FGFS111).

My Model is also missing: FGFS-101

Indigo Z-Wave Version: 7.4.0
Node ID: 39
Model: Notification Sensor
Model ID: 0B013002
Manufacturer: Fibaro System
Manufacturer ID: 010F
Protocol Version: 4.05
Application Version: 3.02
Model Definition Version: 0
Library Type: 3
Class Name: Notification Sensor
Class Hierarchy: 04 : 07 : 01
Command Class Base: 00
Command Versions: 20v1 80v1 22v1 84v2 85v1 86v1 71v1 8Ev1 70v1 31v5 72v1 73v1 56v1 98v1 59v1 5Av1 9Cv1 7Av1 5Ev1
Encryption Status: Supported but not Enabled
Multi-Endpoint Types: - none -
Multi-Endpoint Classes: - none -
Multi-Instance Counts: - none -
Features: routing, battery, beaming, security, waking
Neighbors: 3, 9, 11, 12, 13, 18, 21, 22, 23, 38
Associations: 1:[1] 2:[] 3:[] 4:[]
Config Values: - none -

any chance getting it added soon?