Aeon Labs Z-Stick Plus Gen5 (ZW090)

Posted on
Wed Jun 19, 2019 9:10 am
sumocomputers offline
Posts: 151
Joined: Jun 23, 2008

Re: Aeon Labs Z-Stick Plus Gen5 (ZW090)

jay (support) wrote:
From that video, it looks to me like a failed Z-Stick. I've never seen that behavior myself, and I don't believe we've had any reports of it. Perhaps contact Aeotec and see what they have to say about it?


Thanks. I will order another stick and see what happens.

I read some old posts that seemed pretty complicated, wondered with Indigo 7.3, if there is a documented procedure for replacing a Z-Wave interface like the Z-Stick?

Posted on
Wed Jun 19, 2019 9:29 am
jay (support) offline
Site Admin
User avatar
Posts: 15595
Joined: Mar 19, 2008
Location: Austin, Texas

Re: Aeon Labs Z-Stick Plus Gen5 (ZW090)

Unfortunately, no. The best advice is to exclude a device then immediately include/sync it. Start from the closest device to the stick and work your way out.

This is why I'd contact Aeotec first to confirm that the stick is failing vs something else.

Jay (Indigo Support)
Twitter | Facebook | LinkedIn

Posted on
Wed Jun 19, 2019 9:35 am
sumocomputers offline
Posts: 151
Joined: Jun 23, 2008

Re: Aeon Labs Z-Stick Plus Gen5 (ZW090)

jay (support) wrote:
Unfortunately, no. The best advice is to exclude a device then immediately include/sync it. Start from the closest device to the stick and work your way out.

This is why I'd contact Aeotec first to confirm that the stick is failing vs something else.


I will reach out Aeotec, but in the event I need a new stick:

Should I have both sticks plugged in during the exclude/include process?

Posted on
Wed Jun 19, 2019 9:57 am
jay (support) offline
Site Admin
User avatar
Posts: 15595
Joined: Mar 19, 2008
Location: Austin, Texas

Re: Aeon Labs Z-Stick Plus Gen5 (ZW090)

sumocomputers wrote:
Should I have both sticks plugged in during the exclude/include process?


No - you can exclude devices (included in the old stick) from the new stick, just unplug the old one completely.

And, BTW, just do the inclusion from the existing Indigo device's define and sync dialog - there's no need to delete the Indigo device since that will lose all references to the device from other things (triggers, schedules, actions, etc).

Jay (Indigo Support)
Twitter | Facebook | LinkedIn

Posted on
Tue Sep 03, 2019 7:44 pm
farberm offline
Posts: 211
Joined: Feb 24, 2008

Re: Aeon Labs Z-Stick Plus Gen5 (ZW090) - Cannot add nodes

I want to replace my gen2 stick with a gen5 stick. I removed all 8 of my zwave devices from indigo.

I removed the old gen2 and inserted the new gen5. I reconfigured the device and it is recognized.

I cannot however get any z-wave devices to connect to the network.

I have tried two methods
1. Unplug the Gen5 z-wave, go near each module and push its button. The blue light is blinking slowly but never flashed quickley to recognize the new device being added
2. I leave the gen5 plugged in and go to z-wave start inclusion. The event log says inclusion started. I then push the button on the zwave device I want but it never includes it. The node section stays blank and there are no devices to define in indigo

Frustrating. I must be doing something wrong??

Yes, I reset the gen5 and tried to start from the beginning without luck.

Yes, I inserted the old gen2 and also reset it to make sure they were not still communicating

Posted on
Tue Sep 03, 2019 8:06 pm
matt (support) offline
Site Admin
User avatar
Posts: 19207
Joined: Jan 27, 2003
Location: Texas

Re: Aeon Labs Z-Stick Plus Gen5 (ZW090)

When you removed the 8 devices from Indigo did you exclude them from the Z-Stick? The devices in Indigo actually don't have to be deleted, but you do have to exclude the Z-Wave modules from the Z-Stick. Note you can exclude the modules using the new Z-Stick (via the menu item under Interfaces->Z-Wave->). That seems odd since it isn't the one that included them but the important thing is the modules receive the command telling them to exclude from the controller they are paired with, so it works.

Image

Who is online

Users browsing this forum: No registered users and 1 guest

cron