I have two Nanoleaf Essentials bulbs in HomeKit. Inside of Indigo, I have those two bulbs in a virtual group "Hall Lights" set up as an action group execution model. On sends one script command to Shortcuts, off sends another.
I also have that Virtual group exposed to HomeKit in HKLS. And this seems to be the problem.
In Shortcuts, if I have the shortcut address each bulb individually, everything works as it should when triggered by Indigo or run in Shortcuts directly.
If I have the shortcut turn on or off the Hall Lights Virtual Device, I get
- Code: Select all
2022-11-15 11:15:43.591 Action Group Hall Lights ON Script
2022-11-15 11:15:43.591 Virtual Devices sent 'Hall Fixtures' on
2022-11-15 11:17:09.889 Action Group Hall Lights ON Script
2022-11-15 11:17:09.889 Virtual Devices sent 'Hall Fixtures' on
2022-11-15 11:17:10.400 Action Group Hall Lights ON Script
2022-11-15 11:17:10.401 Virtual Devices sent 'Hall Fixtures' on
2022-11-15 11:17:10.979 Action Group Hall Lights ON Script
2022-11-15 11:17:10.980 Virtual Devices sent 'Hall Fixtures' on
2022-11-15 11:17:11.555 Action Group Hall Lights ON Script
2022-11-15 11:17:11.556 Virtual Devices sent 'Hall Fixtures' on
2022-11-15 11:17:12.130 Action Group Hall Lights ON Script
2022-11-15 11:17:12.130 Virtual Devices sent 'Hall Fixtures' on
2022-11-15 11:17:12.710 Action Group Hall Lights ON Script
2022-11-15 11:17:12.711 Virtual Devices sent 'Hall Fixtures' on
2022-11-15 11:17:13.281 Action Group Hall Lights ON Script
2022-11-15 11:17:13.282 Virtual Devices sent 'Hall Fixtures' on
2022-11-15 11:17:13.869 Action Group Hall Lights ON Script
2022-11-15 11:17:13.870 Virtual Devices sent 'Hall Fixtures' on
I don't know WHY this happens, but thought I should post it in case anyone else hits the same issue.