Installing the MQTT app on a Hubitat C8

After reading all the posts in this topic, I was prepared to have problems installing the MQTT app on my new Hubitat. Especially since I have a C8. I was not disappointed. But, I did figure it out, and in the process may have learned something that explains other problems reported with installing MQTT app on the Hubitat. Here it is, step-by-step:

1. Read: https://docs2.hubitat.com/how-to/install-custom-apps
2. Go to: Developer Tools -> Apps code
3. click +New APP
4. click Import
5. paste the URL to the raw display of the app ( https://github.com/xAPPO/MQTT/raw/beta3/MQTT%20app )
6. click Import
7. click Ok
8. click Save
   --
9. Go to: Developer Tools -> Drivers code
10. click +New Driver
11. click Import
12. paste the URL to the raw display of the driver ( https://raw.githubusercontent.com/xAPPO ... t%20driver )
13. click Import
14. click Ok
15. click Save
    --
16. Now go to Apps
17. click +Add User App
18. In the popup window, click MQTT
19. Configure the app
    --
20. However... If you get a long (endless) delay:
21. Connect to the Hubitat in s second browser window
22. on the left side menu, click Logs
23. wait until you see messages from the MQTT daemon
24. In the log message display click either info or debug
25. Scroll to the bottom of the page where you see the name of the app. click MQTT
26. You can now configure the MQTT app and set the IP ADdress, etc. for your broker
27. click Done
28. Probably a good idea to restart the Hubitat at this point

This is mostly from my notes, but also a bit from memory. So, if you see any errors, please let me know.