Hi Aaron. My first Shelly trv has arrived. What do you need from me to try and see if this can be controlled?
Thanks. Simon
siclark wrote:Having a bit of a play with this, I think the basics would involve enabling reporting temperature and valve status back into Indigo (and so enabling onwards to Homekit) so that Indigo can change the current set temp. Enabling boost and adjusting the boost minutes would also be handy.
I would be happy to adjust the actual programs in Shelly app for a while, although I would like a clever way to disable the programs via Indigo so that I can enable summer or holiday mode and prevent the heating coming on. (I think this can be done be disabling the schedule?).
It seems quite clever too in that you can address all thermostats together, ie to put into holiday mode (disable all schedules) or individually.
"thermostats":
[{"target_t":{"enabled":true,"value":15.0,"value_op":8.0,"units":"C","accelerated_heating":false},
"schedule":true,
"schedule_profile":1,
"schedule_profile_names":["Dining Room","Livingroom 1","Bedroom","Bedroom 1","Holiday"],
"schedule_rules":["0600-0123456-19","0900-01234-21","2000-0123456-18","2300-0123456-12","0900-56-18"],
"temperature_offset":0.0,
"ext_t":{"enabled":true, "floor_heating": true},
"t_auto":{"enabled":true},"boost_minutes":30,"valve_min_percent":0.00,"force_close":false,"calibration_correction":true,"extra_pressure":false,"open_window_report":false}] }
CliveS wrote:not sure to move over to Shelly TRV (waiting on feedback from @autolog and @siclark who both have them) or just not upgrade to the next release.
siclark wrote:Cheers... once I figured out my settings I got it all working. With the valve % visibility I can set triggers to control my boiler which is fantastic.
I have also tested adding into Homekitlink plugin, and it works well setting the temperature from the Home app, except I need to change the mode to Heat On first. When I then change the termperature in Indigo or Shelly app, Homekit sees the thermostat as off, and doesnt show set point.
Could we have a state that is always "heat on" so that the Home app picks up on the set point. I think that might also help with the little icon in Indigo as well.
The boost function seems to work well, I can see my wife making a lot of use of that!
Great job. Thank you.
siclark wrote:So the heat setting works, but it doesnt seem to pick up the set point. It shows Heating to 7.0 always. I can adjust the setpoint and it sends it to Indigo ok, and the shelly trv responds, but in the Home app it then just drops back to showing 7.0c.
Not sure why.
siclark wrote:ps far less importantly, but would be great to be able to change what schedule profile name is active. I see that the device announces the 5 available, so hopefully an easy action with a drop down to choose?
this is in settings
- Code: Select all
"thermostats":
[{"target_t":{"enabled":true,"value":15.0,"value_op":8.0,"units":"C","accelerated_heating":false},
"schedule":true,
"schedule_profile":1,
"schedule_profile_names":["Dining Room","Livingroom 1","Bedroom","Bedroom 1","Holiday"],
"schedule_rules":["0600-0123456-19","0900-01234-21","2000-0123456-18","2300-0123456-12","0900-56-18"],
"temperature_offset":0.0,
"ext_t":{"enabled":true, "floor_heating": true},
"t_auto":{"enabled":true},"boost_minutes":30,"valve_min_percent":0.00,"force_close":false,"calibration_correction":true,"extra_pressure":false,"open_window_report":false}] }
Users browsing this forum: No registered users and 1 guest