In Indigo 6.0.15 (and probably all Indigo 6 versions, not sure), when you click on an iMeter Solo device in the device list of the Indigo GUI, a "Reset" button appears next to the "Last reset" value. Clicking that button seems to do something, but doesn't actually reset the iMeter Solo's internal counter. Here's what happens when clicking that button.
- Code: Select all
2014-10-02 18:42:39.865 Sent INSTEON "Family Room Entertainment Center" reset imeter accumulative totals
2014-10-02 18:42:41.545 Error accumulative energy total near overflow -- send reset request to module
2014-10-02 18:42:41.546 Sent INSTEON "Family Room Entertainment Center" imeter data request (received: 65528 W, -1.0000 kWh)
2014-10-02 18:42:41.546 Error accumulative energy total near overflow -- send reset request to module
I also tried sending the raw reset command...
- Code: Select all
2014-10-02 18:41:54.380 Sent INSTEON "Family Room Entertainment Center" raw insteon command (80 00; ack: 00)
2014-10-02 18:42:02.110 Error accumulative energy total near overflow -- send reset request to module
2014-10-02 18:42:20.435 Error accumulative energy total near overflow -- send reset request to module
2014-10-02 18:42:20.435 Sent INSTEON "Family Room Entertainment Center" imeter data request (received: 65528 W, -1.0000 kWh)
2014-10-02 18:42:20.436 Error accumulative energy total near overflow -- send reset request to module
Am I missing something? Is there something wrong with my iMeter Solo maybe? I tried a Define and Sync on it, but that didn't fix things.
- Code: Select all
2014-10-02 18:36:21.591 PowerLinc Linking - entered discovery linking mode (240 seconds)
2014-10-02 18:36:24.238 PowerLinc Linking - sending engine version request to 18.F5.77
2014-10-02 18:36:24.406 PowerLinc Linking - received engine version 01 from 18.F5.77
2014-10-02 18:36:24.406 PowerLinc Linking - sending id request for device information to 18.F5.77
2014-10-02 18:36:25.254 PowerLinc Linking - received id request response from 18.F5.77
2014-10-02 18:36:27.768 PowerLinc Linking - initializing remote device "Family Room Entertainment Center" (address 18.F5.77, firmware version 87)
2014-10-02 18:36:27.929 PowerLinc Linking - initialize complete
2014-10-02 18:36:27.988 PowerLinc Linking - syncing remote device "Family Room Entertainment Center" (address 18.F5.77, firmware version 87)
2014-10-02 18:36:30.510 PowerLinc Linking - syncing all links
2014-10-02 18:36:31.801 PowerLinc Linking - . . . read: INSTEON dev link to controller 22.40.F2, flags A2, group FE, data 00 00 00
2014-10-02 18:36:33.084 PowerLinc Linking - comparing local and remote links
2014-10-02 18:36:33.085 PowerLinc Linking - compare complete
2014-10-02 18:36:33.085 PowerLinc Linking - sync complete
2014-10-02 18:36:33.319 PowerLinc Linking - syncing PowerLinc links (address 22.40.F2)
2014-10-02 18:36:33.321 PowerLinc Linking - . . adding: INSTEON plc link to controller 18.F5.77, flags 03, group 01, data 00 00 FF
2014-10-02 18:36:33.339 PowerLinc Linking - . . adding: (not added -- probably already exists)
2014-10-02 18:36:33.339 PowerLinc Linking - sync complete
2014-10-02 18:36:33.385 PowerLinc Linking - device "Family Room Entertainment Center" links updated
2014-10-02 18:36:33.385 PowerLinc Linking - PowerLinc links updated
2014-10-02 18:36:42.875 PowerLinc Linking - exited linking mode