Monoprice 6 Zone Amp Plugin

kwijibo007
Posts: 325
Joined: Fri Sep 27, 2013 4:58 pm
Location: Melbourne, Australia

Monoprice 6 Zone Amp Plugin

Post by kwijibo007 »

Hi All,

I've written an Indigo 7 plugin to control Monoprice 6 Zone Amps (https://www.monoprice.com/product?p_id=10761).

Supported actions below:
  • Turn On
    Turn Off
    Set Volume (directly sets the volume level)
    Increase Volume (increases volume by 1)
    Decrease Volume (decreases volume by 1)
    Set Balance (directly sets the balance level)
    Increase Balance (increases balance by 1)
    Decrease Balance (decreases balance by 1)
    Set Bass (directly sets the bass level)
    Increase Bass (increases bass by 1)
    Decrease Bass (decreases bass by 1)
    Set Treble (directly sets the treble level)
    Increase Treble (increases treble by 1)
    Decrease Treble (decreases treble by 1)
    Mute On
    Mute Off
    Set Source (directly sets the source)
    Toggle Source Fwd (moves to the next configured source)
    Toggle Source Rev (moves to the last configured source)
When I started writing the plugin I didn't realise that RogueProeliator's Dayton Audio plugin also supported the Monoprice units. :oops: RogueProeliator's plugin supports daisy chaining which this one doesn't. There are a couple of other differences so it may prove useful to some people...

Full instructions and the plugin download can be found here https://aushomeautomator.wordpress.com/ ... go-plugin/.

Would appreciate any feedback.

Thanks,

Pete
alphaboy
Posts: 10
Joined: Tue Dec 01, 2009 7:43 am
Location: Montreal, Canada

Re: Monoprice 6 Zone Amp Plugin

Post by alphaboy »

Great plug-in, tried it running off an Xserve (with built in Serial port) and worked perfectly... I do have 2x 6 zones with the master / slave cable so would love to adapt the plug-in to support 12 zones.

Also would love to know what would be involved in order to make this plug-in work on indigo version 6?

Thanks again and great work!
User avatar
FlyingDiver
Posts: 7323
Joined: Sat Jun 07, 2014 10:36 am
Location: Southwest Florida, USA

Re: Monoprice 6 Zone Amp Plugin

Post by FlyingDiver »

RogueProeliator's Dayton Audio plugin supports master/slave units and works on Indigo 6. Just FYI.
joe (aka FlyingDiver)
my plugins: http://forums.indigodomo.com/viewforum.php?f=177
kwijibo007
Posts: 325
Joined: Fri Sep 27, 2013 4:58 pm
Location: Melbourne, Australia

Re: Monoprice 6 Zone Amp Plugin

Post by kwijibo007 »

Thanks for the feedback, alphaboy :D
FlyingDiver wrote:RogueProeliator's Dayton Audio plugin supports master/slave units and works on Indigo 6. Just FYI.

I'd like to add the master/slave capability at some stage. It's on my to-do list but as I only have one unit it's difficult to test. As FlyingDiver suggested though, RougueProeliator's plugin has both those capabilities.

Happy to try and accommodate any other feature requests if you have any..

Pete
haychess
Posts: 23
Joined: Mon Dec 21, 2015 2:06 pm

Re: Monoprice 6 Zone Amp Plugin

Post by haychess »

Hi.

Ever since updating Indigo to 7.5, I am having issues with the Monoprice plugin. It keeps giving me this error over and over in the log:

Monoprice 6 Zone Amp Error More than 6 zones have been returned - Should not be possible??

I can't control the plugin any longer.

Do you know what's up with it?
kwijibo007
Posts: 325
Joined: Fri Sep 27, 2013 4:58 pm
Location: Melbourne, Australia

Re: Monoprice 6 Zone Amp Plugin

Post by kwijibo007 »

I've updated the plugin (version 2.0.0) to support Python 3.

Please let me know if you have any issues.

Pete
User avatar
stewkenly
Posts: 38
Joined: Mon Dec 28, 2015 1:57 pm
Location: Austin, TX

Re: Monoprice 6 Zone Amp Plugin

Post by stewkenly »

I started seeing the same error, more than 6 zones.

Code: Select all

   Enabling plugin "Monoprice 6 Zone Amp 2.0.0" using API v3.0
   Starting plugin "Monoprice 6 Zone Amp 2.0.0" (pid 9974)
   Started plugin "Monoprice 6 Zone Amp 2.0.0"
   Monoprice 6 Zone Amp Error      More than 6 zones have been returned - Should not be possible??
   Monoprice 6 Zone Amp Error      More than 6 zones have been returned - Should not be possible??
   Monoprice 6 Zone Amp Error      More than 6 zones have been returned - Should not be possible??
   Monoprice 6 Zone Amp Error      More than 6 zones have been returned - Should not be possible??
   Monoprice 6 Zone Amp Error      More than 6 zones have been returned - Should not be possible??
   Monoprice 6 Zone Amp Error      More than 6 zones have been returned - Should not be possible??
   Monoprice 6 Zone Amp Error      More than 6 zones have been returned - Should not be possible??
   Monoprice 6 Zone Amp Error      More than 6 zones have been returned - Should not be possible??
   Monoprice 6 Zone Amp Error      More than 6 zones have been returned - Should not be possible??
   Monoprice 6 Zone Amp Error      More than 6 zones have been returned - Should not be possible??
   Monoprice 6 Zone Amp Error      More than 6 zones have been returned - Should not be possible??
   Monoprice 6 Zone Amp Error      More than 6 zones have been returned - Should not be possible??
   Monoprice 6 Zone Amp Error      More than 6 zones have been returned - Should not be possible??
   Monoprice 6 Zone Amp Error      More than 6 zones have been returned - Should not be possible??
   Monoprice 6 Zone Amp Error      More than 6 zones have been returned - Should not be possible??
   Monoprice 6 Zone Amp Error      More than 6 zones have been returned - Should not be possible??
   Monoprice 6 Zone Amp Error      More than 6 zones have been returned - Should not be possible??
   Monoprice 6 Zone Amp Error      More than 6 zones have been returned - Should not be possible??
   Monoprice 6 Zone Amp Error      More than 6 zones have been returned - Should not be possible??
   Monoprice 6 Zone Amp Error      More than 6 zones have been returned - Should not be possible??
   Monoprice 6 Zone Amp Error      More than 6 zones have been returned - Should not be possible??
   Monoprice 6 Zone Amp Error      More than 6 zones have been returned - Should not be possible??
   Monoprice 6 Zone Amp Error      More than 6 zones have been returned - Should not be possible??
   Monoprice 6 Zone Amp Error      More than 6 zones have been returned - Should not be possible??
   Monoprice 6 Zone Amp Error      More than 6 zones have been returned - Should not be possible??
   Monoprice 6 Zone Amp Error      More than 6 zones have been returned - Should not be possible??
   Monoprice 6 Zone Amp Error      More than 6 zones have been returned - Should not be possible??
   Monoprice 6 Zone Amp Error      More than 6 zones have been returned - Should not be possible??
   Monoprice 6 Zone Amp Error      More than 6 zones have been returned - Should not be possible??
   Monoprice 6 Zone Amp Error      More than 6 zones have been returned - Should not be possible??
   Monoprice 6 Zone Amp Error      More than 6 zones have been returned - Should not be possible??
   Monoprice 6 Zone Amp Error      More than 6 zones have been returned - Should not be possible??
   Monoprice 6 Zone Amp Error      More than 6 zones have been returned - Should not be possible??
   Monoprice 6 Zone Amp Error      More than 6 zones have been returned - Should not be possible??
   Monoprice 6 Zone Amp Error      More than 6 zones have been returned - Should not be possible??
   Monoprice 6 Zone Amp Error      More than 6 zones have been returned - Should not be possible??
   Disabling plugin "Monoprice 6 Zone Amp 2.0.0"
   Stopping plugin "Monoprice 6 Zone Amp 2.0.0" (pid 9974)
   Monoprice 6 Zone Amp Error      An error occurred adding a polling command to the queue
   Stopped plugin "Monoprice 6 Zone Amp 2.0.0"
What was the solution for this?

Thanks
User avatar
stewkenly
Posts: 38
Joined: Mon Dec 28, 2015 1:57 pm
Location: Austin, TX

Re: Monoprice 6 Zone Amp Plugin

Post by stewkenly »

Interesting update! On a hunch, I replaced the USB to RS232 cable and it started working again

IF you are open to a suggestion, I think it might be helpful to report the error more than 6 channels detected as a communications fault.

Thanks for helping!
Post Reply

Return to “Monoprice 6 Zone Amp”