agame wrote:- sorry, yes EXT 2 is what I'm on.
- 'stop' would still be great...with that I still have full control -and status on at least two of the blinds!
I'll still have a squizz at what the rfxmgr is seeing. I'd swear it was getting the unit code lol.
Posting 0.2.2/Pushing to github now.
(will keep rfxlan connected to development mac for moment....)
Yeah - would be interested in what see in RFXMGR - Everywhere I google with those A-OK AC114 blinds everyone is posting unitcode of 1.
(May be why userguide says is transmit only)
The Processing - Hex received by Plugin is very low level.
I did check - no processing, no nothing, basically just what the RFXCOM device has received.
But hopefully you follow the HEX explanation - and welcome to press buttons and see if can get unitcode through....
Although note this post from a agame in 2014 in Vera forum...
- Code: Select all
I am thrilled that the plugin works well supporting both receiving and sending [for the first time] messages to the A-OK blind controllers. UI15 hopefully upgrading soon.
There is one problem: I have three blinds and use 4 channels (1,2,3 for each respective blind; and 4 to control all simultaneously).
the plugin appears to recognise any channel interchangeably (only one device is created, but the state changes regardless of which channel is selected on the multi channel remote). However commands sent only work on the blind registered to channel 1.
update: a second instance of the controller has appeared. both work but both control blind 1.
Is there a way to configure multiple devices operating on different channels? Or is this a limitation at the RFXTRX end?
http://forum.micasaverde.com/index.php/ ... #msg208368Sees like same issue really... but RFXMGR will sort out I suspect.
Edit:
Will get on and add a blindState to the BlindT1234 device
- Open/Closed or Part states
Glenn