- Posted on
Sat Aug 08, 2015 7:32 pm
-
roquej
offline
-
- Posts: 609
- Joined: Jan 04, 2015
- Location: South Florida, USA
Robert - sorry for the delay. I was out of town. Please, see below:
Aug 8, 2015, 9:28:33 PM
RFXCOM Debug getConfiguration start
RFXCOM initializing communication on port /dev/cu.usbserial-A1YQC2JG at speed 38400
RFXCOM Debug serial port opened
RFXCOM Debug send reset cmd: 13 0 0 0 0 0 0 0 0 0 0 0 0 0 (0D 00 00 00 00 00 00 00 00 00 00 00 00 00)
RFXCOM Debug PIC INIT IS: none
RFXCOM Debug send init cmd: 13 0 0 1 2 0 0 0 0 0 0 0 0 0 (0D 00 00 01 02 00 00 00 00 00 00 00 00 00)
RFXCOM Debug rcvd init reply: 13 1 0 1 2 82 91 0 0 32 0 1 2 28 (0D 01 00 01 02 52 5B 00 00 20 00 01 02 1C)
RFXCOM connected to RFXrec 433.92 MHz, firmware version 91
RFXCOM currently enabled receiver protocols: Oregon Scientific
AD2USB Alarm Interface Zone: Sensor-Terrace Motion supervision received. (RFX:0993717,04)
RFXCOM Debug processing: 11 85 2 0 177 0 0 0 0 1 227 73 (0B 55 02 00 B1 00 00 00 00 01 E3 49)
RFXCOM Debug Rainsensor 177 values updated rate:0.000000 total:1.890000
RFXCOM Debug Rainsensor 177 in list
RFXCOM Debug check if new day: last date 2015/08/08, new date 2015/08/08
RFXCOM Debug saving plugin props
RFXCOM Debug ++++++++++++++
RFXCOM Debug processing: 10 82 2 1 99 1 1 32 82 3 73 (0A 52 02 01 63 01 01 20 52 03 49)
RFXCOM Debug Temp sensor 355 now 83.84 degrees and 82 humidity.
RFXCOM Debug Temp sensor 355 in list
RFXCOM Debug UpdateMinMax state temperature value 83.8
RFXCOM Debug check if new day: last date 2015/08/08, new date 2015/08/08
RFXCOM Debug UpdateMinMax state humidity value 82
RFXCOM Debug check if new day: last date 2015/08/08, new date 2015/08/08
RFXCOM Debug ++++++++++++++
Aug 8, 2015, 9:29:37 PM
RFXCOM Debug processing: 11 85 2 2 177 0 0 0 0 1 227 73 (0B 55 02 02 B1 00 00 00 00 01 E3 49)
RFXCOM Debug Rainsensor 177 values updated rate:0.000000 total:1.890000
RFXCOM Debug Rainsensor 177 in list
RFXCOM Debug check if new day: last date 2015/08/08, new date 2015/08/08
RFXCOM Debug saving plugin props
RFXCOM Debug ++++++++++++++
Aug 8, 2015, 9:29:55 PM
RFXCOM Debug processing: 10 82 2 3 99 1 1 32 82 3 73 (0A 52 02 03 63 01 01 20 52 03 49)
RFXCOM Debug Temp sensor 355 now 83.84 degrees and 82 humidity.
RFXCOM Debug Temp sensor 355 in list
RFXCOM Debug UpdateMinMax state temperature value 83.8
RFXCOM Debug check if new day: last date 2015/08/08, new date 2015/08/08
RFXCOM Debug UpdateMinMax state humidity value 82
RFXCOM Debug check if new day: last date 2015/08/08, new date 2015/08/08
RFXCOM Debug ++++++++++++++
Aug 8, 2015, 9:30:23 PM
RFXCOM Debug Teststring=0A5205022F0000325F0359
RFXCOM Debug processing: 10 82 5 2 47 0 0 50 95 3 89 (0A 52 05 02 2F 00 00 32 5F 03 59)
RFXCOM Debug Temp sensor 47 now 41.00 degrees and 95 humidity.
RFXCOM Debug Temp sensor 47 in list
RFXCOM Debug UpdateMinMax state temperature value 41.0
RFXCOM Debug check if new day: last date 2015/08/08, new date 2015/08/08
RFXCOM Debug UpdateMinMax state humidity value 95
RFXCOM Debug check if new day: last date 2015/08/08, new date 2015/08/08
RFXCOM Debug ++++++++++++++
RFXCOM Debug processing: 11 85 2 4 177 0 0 0 0 1 227 73 (0B 55 02 04 B1 00 00 00 00 01 E3 49)
RFXCOM Debug Rainsensor 177 values updated rate:0.000000 total:1.890000
RFXCOM Debug Rainsensor 177 in list
RFXCOM Debug check if new day: last date 2015/08/08, new date 2015/08/08
RFXCOM Debug saving plugin props
RFXCOM Debug ++++++++++++++
RFXCOM Debug validating Prefs called
RFXCOM Debug getConfiguration start
RFXCOM initializing communication on port /dev/cu.usbserial-A1YQC2JG at speed 38400
RFXCOM Debug serial port opened
RFXCOM Debug send reset cmd: 13 0 0 0 0 0 0 0 0 0 0 0 0 0 (0D 00 00 00 00 00 00 00 00 00 00 00 00 00)
RFXCOM Debug PIC INIT IS: none
RFXCOM Debug send init cmd: 13 0 0 1 2 0 0 0 0 0 0 0 0 0 (0D 00 00 01 02 00 00 00 00 00 00 00 00 00)
RFXCOM Debug rcvd init reply: 13 1 0 1 2 82 91 0 0 32 0 1 2 28 (0D 01 00 01 02 52 5B 00 00 20 00 01 02 1C)
RFXCOM connected to RFXrec 433.92 MHz, firmware version 91
RFXCOM currently enabled receiver protocols: Oregon Scientific
Aug 8, 2015, 9:30:49 PM
RFXCOM Debug processing: 10 82 2 0 99 1 1 32 82 3 73 (0A 52 02 00 63 01 01 20 52 03 49)
RFXCOM Debug Temp sensor 355 now 83.84 degrees and 82 humidity.
RFXCOM Debug Temp sensor 355 in list
RFXCOM Debug UpdateMinMax state temperature value 83.8
RFXCOM Debug check if new day: last date 2015/08/08, new date 2015/08/08
RFXCOM Debug UpdateMinMax state humidity value 82
RFXCOM Debug check if new day: last date 2015/08/08, new date 2015/08/08
RFXCOM Debug ++++++++++++++
Thank you for the help!
JP