LED Simple Effects Plugin (for Fibaro RGBW)

Posted on
Sat Jun 09, 2018 1:57 am
GlennNZ offline
Posts: 439
Joined: Dec 07, 2014

Re: LED Simple Effects Plugin (for Fibaro RGBW)

DVDDave wrote:
GlennNZ wrote:
Have you any working parameter 37 examples? either to guide my issues, and/or for adding to selection menu.

Here are some I send to 37 with Indigo Z-wave actions:

150994944 Fade rainbow colors
1224736847 Slow speed fade in/out
1224736815 Medium speed fade in/out


Thanks.
Had added those options and updated the plugin.
Still need a bit of testing for the colourChooser - not working completely right unfortunately (and side-tracked by Tesla plugin just posted)- need to work on my binary to decimal fangshey ..

(the aeotec bulb excel spreadsheet was ideal - and doesn’t seem same exists for Led strips)

Glenn

Posted on
Sat Jun 09, 2018 8:58 am
DVDDave offline
Posts: 329
Joined: Feb 26, 2006
Location: San Jose, CA

Re: LED Simple Effects Plugin (for Fibaro RGBW)

I looked again and these may be better example values:

Param 37: 16777255 Fade rainbow colors
Param 39: 341835776 Param 37: 1375731791 Slow speed fade in/out red, green, blue
Param 39: 341835776 Param 37: 1375731759 Medium speed fade in/out red, green, blue

Posted on
Fri Jul 06, 2018 9:55 pm
jltnol offline
Posts: 316
Joined: Oct 15, 2013

Re: LED Simple Effects Plugin (for Fibaro RGBW)

Ok so I'm trying to get Patterns to work.

sorry... posted this in the wrong forum..

Deleted to remove any confusion...
Last edited by jltnol on Sat Jul 07, 2018 8:17 pm, edited 1 time in total.

Posted on
Sat Jul 07, 2018 4:12 pm
GlennNZ offline
Posts: 439
Joined: Dec 07, 2014

LED Simple Effects Plugin (for Fibaro RGBW)

jltnol wrote:
Ok so I'm trying to get Patterns to work.

Back in the Plugin "Welcome to the LED Manager Pattern Editor", my Pattern is selectable and I can edit and save the colors and the times... but alas, I don't see a way to select the pattern as an Action Group.


so what am I doing wrong ?


Looks like you are not using this plugin but another one? ?LED Manager...
Have a look here:
viewforum.php?f=176

Not sure I can help and would suggest you post there?

Glenn

Posted on
Sat Jul 07, 2018 8:12 pm
jltnol offline
Posts: 316
Joined: Oct 15, 2013

Re: LED Simple Effects Plugin (for Fibaro RGBW)

Ok
Now I just feel like an idiot.. :roll:

Posted on
Fri Aug 17, 2018 1:22 pm
howartp offline
Posts: 3341
Joined: Jan 09, 2014
Location: West Yorkshire, UK

Re: LED Simple Effects Plugin (for Fibaro RGBW)

Glenn,

Can you fix the images on the first thread of this plugin, and the pluginstore, and github?

Can someone explain the interaction between raw Indigo use of Fibaro RGBW Controller or Aeotech RGB strips, this plugin and the LED Manager plugin?

What do I need one or both plugins to achieve?

(I'm new to any RGB stuff; no Hue, Fibaro, Aeotech RGB strips or anything)

Peter

Posted on
Sun Aug 19, 2018 12:50 am
GlennNZ offline
Posts: 439
Joined: Dec 07, 2014

Re: LED Simple Effects Plugin (for Fibaro RGBW)

howartp wrote:
Glenn,

Can you fix the images on the first thread of this plugin, and the pluginstore, and github?
Can someone explain the interaction between raw Indigo use of Fibaro RGBW Controller or Aeotech RGB strips, this plugin and the LED Manager plugin?
What do I need one or both plugins to achieve?
(I'm new to any RGB stuff; no Hue, Fibaro, Aeotech RGB strips or anything)

Peter


Sure - the image host was down and have updated to their new URL. (probably should check other plugin info's as well)

I'm not sure I can go the full hog and explain how to use RGBW strips/controller.

But this Plugin:
- Enables the particularly devices build-in colour cycle/change modes (it is called Simple for a reason!)
Basically it allows an Action Group to be called for that device to run 'fireplace' mode for Fibaro RGBW
(it then sends the appropriate raw commands to turn on and off as needed)

These modes - are set and basically cycle through colours/effects internally to look in this case like a fireplace.

You could potentially manually recreate by sending multiple colour change Z-wave commands every few seconds or so - but that would potentially be a lot of Z-wave traffic...

LED Manager - not sure - I don't use.

Glenn

Posted on
Sun Sep 16, 2018 11:23 am
zabazoom offline
Posts: 54
Joined: Nov 09, 2013

Re: LED Simple Effects Plugin (for Fibaro RGBW)

Hi
So I'm on 7.1.1 just added Fibaro RGBW installed lasted version of the plugin. Indego sees it and controls it fine, But plugin does not see it when I go to select device. Am I missing something? firmware on the RGBW is 25.25
Ja

Posted on
Sun Sep 16, 2018 1:23 pm
zabazoom offline
Posts: 54
Joined: Nov 09, 2013

Re: LED Simple Effects Plugin (for Fibaro RGBW)

hahahah never mind I did a resync and it correcteded

Who is online

Users browsing this forum: No registered users and 1 guest