Hi again.
Im still having issues with this and am starting to run out of ideas of things to try. Ill tell the story as it happened....
So I built my indigo server and got phidgets setup as the main interface to room connected PIR's, Audio detection relays and optically isolated outputs relays controlling garden lights and amp switching.
The 2 Phidgets are a 0/16/16 and a 8/8/8
This ran for about 2 years not missing a beat.
About 2 months before Christmas it started to drop connection to the phidget every now and then solved by a Mac restart.
It started to get much worse when (Don't know if coincidentally) I upgraded to indigo 7.
So I thought I would upgrade to High Sierra and that totally killed any communication to the web service and the cards.
Fresh installed High Sierra same result
Fresh installed Sierra and it came back online, Great I thought but several hours later dropped connection to the webservice,
I can now generally get about 2h of use out of the interface before it drops, and I've been running it now like that since before Christmas.
All I need to do I've discovered is stop and restart the Webservice on the preference pane and indigo fires straight back in to action detecting my motion as I move about the house.
Things I tried.....
Tried and new and bigger power supply on my relay outputs - No Effect
Tried disconnecting all usb's out of the Mac and running a New USB 1m direct from the Mac to the 0/16/16 (Not through my electrically noisy trunking) - No Effect
Tried going back to a much older version of the Phidget preference pane from there legacy downloads page - No Effect
Tried Several of your older plugins - No Effect
Today I have been running your phidgets plugin in debug and it seems to me like it just stops like there is no activity happening and then ill restart the webservice and it all just starts going right where it left off. It might be my imagination but it does seem to die quicker with the debug on.
I can't quite see for the 2.1 version how to run debug on their end.
Any thoughts. I could get another card wouldn't be an issue if it sorted it out but its killing my connection to the analog card at the same time which suggests its either the USB ports on my Mac failing or something totally wrong with there web service.
Many thanks for any ideas for something I could try. Its really doing my head In keep having to reset it all the time.
Lee
Here is my log from today....
https://www.dropbox.com/s/z2n2o7trhpnhy ... s.txt?dl=0