(Apologies if this isn't the right place to post this.)
I have a trigger set up to take an action based on a keypad button press. The ID of the keypad is 3 and the ID of the button is 7.
I see log messages such as the one below letting me know that the trigger ISN'T firing when other system events occur.
Jan 9, 2018 at 1:21:40 PM
Trigger Nest Home -> RR2 Timeclock Home
Lutron RRA2/Caséta Sending Raw Command: "#TIMECLOCK,17,1,3"
Lutron RRA2/Caséta Debug Sending network command: #TIMECLOCK,17,1,3
Lutron RRA2/Caséta Debug Received a TimeClock message: GNET> ~TIMECLOCK,17,1,3
Lutron RRA2/Caséta Debug Trigger RR2 House Off - Sonos Stop (825620404), Type: keypadButtonPress does not have eventNumber
Lutron RRA2/Caséta Debug Skipping Trigger RR2 House Off - Sonos Stop (825620404), wrong type: keypadButtonPress
Lutron RRA2/Caséta Debug Received a Device message: ~DEVICE,33,94,9,0
Lutron RRA2/Caséta Debug Received a Device message: ~DEVICE,33,95,9,1
But when I actually push the keypad button, nothing shows up in the log at all regarding the trigger
Jan 9, 2018 at 1:22:11 PM
Lutron RRA2/Caséta Debug Received a Device message: ~DEVICE,3,7,3
Lutron RRA2/Caséta Debug Received an Output message: ~OUTPUT,20,1,0.00
|
|
Lutron RRA2/Caséta Debug Received an Output message: ~OUTPUT,69,30,1,0.00
Trigger setup is below. Condition is set to "always" and Actions sends a stop to Sonos (action tested and seems to work fine).
What am I missing?
Thanks,
Mike