Kwikset 916 Managment Problems
Posted: Mon May 29, 2017 4:26 pm
I've finally switched out my locks for the Kwikset 916, and almost everything is fine, but ZWave Lock Manager is having problems sending commands to my locks.
I have a Lock Manager device set up and associated with each lock. If I set up an action that just does a simple "Get User PIN" for one lock, I get:
If I look at Line 146 and do what it's doing manually in a script action:
I get no error and see the following in the log:
(...where 1 2 3 4 5 6 stands in for the one code I set manually on the lock when setting it up)
Any idea what might be happening here?
I have a Lock Manager device set up and associated with each lock. If I set up an action that just does a simple "Get User PIN" for one lock, I get:
- Code: Select all
May 29, 2017, 3:57:18 PM
Action Group Get Code
Z-Wave Lock Manager Requesting PIN for user 1
Z-Wave Lock Manager Error Error in plugin execution ExecuteAction:
Trace back (most recent call last):
File "plugin.py", line 146, in getUserPin
InvalidParameter: could not find module/node for action
If I look at Line 146 and do what it's doing manually in a script action:
- Code: Select all
indigo.zwave.sendRaw(device=indigo.devices[1555487768], cmdBytes=[0x63, 0x2, 0x1], sendMode=1)
I get no error and see the following in the log:
- Code: Select all
Z-Wave sent "Mud Room Lock" raw command [63 02 01]
Z-Wave Lock Manager Status: User code 1 is 1 2 3 4 5 6 (Node: 4)
(...where 1 2 3 4 5 6 stands in for the one code I set manually on the lock when setting it up)
Any idea what might be happening here?