- Posted on
Fri Jul 28, 2017 7:41 am
-
peter
offline
-
- Posts: 34
- Joined: Feb 09, 2011
OK. With a lot of trial and error on the correct procedure to include the Schlage lock with encryption, I finally got it to work! I didn't realize you had to select the option in Indigo to include the new device with encryption. Because the z-wave stick had to be within 10 ft of the door lock, I installed Indigo on my laptop and moved it over to the door during the inclusion of the door lock. It's really not as complicated as it should be. The procedure needs to be performed in exactly the right order, and I have already kinda forgot because I tried all different combinations to get this thing to work! A more clear exact procedure would remove a lot of trial and error. The first step is to make sure the door lock is close to the z-wave stick during the inclusion with encryption. Otherwise, you are screwed. Here is my log when installation was successful:
Z-Wave started controller inclusion mode with encryption
Z-Wave stopping controller inclusion mode
Z-Wave stopped controller inclusion mode
Z-Wave Syncing - started for "010 - Keypad Door Lock"
Z-Wave Syncing - retrieved module neighbors list: - none -
Z-Wave Syncing - assigning return route to "010 - Keypad Door Lock"
Z-Wave Syncing - assigned return route
Z-Wave Syncing - retrieved manufacture and model names: Schlage - 003B, Door Lock (BE369/468/469) - 63415044
Z-Wave Syncing - retrieved protocol version 3.42, app version 113.22
Z-Wave Syncing - retrieved class hierarchy: Routing Slave : Entry Control : Keypad Door Lock (04 : 40 : 03, base 62)
Z-Wave Syncing - retrieved command classes: 20v1 80v1 62v1 63v1 85v1 86v1 22v1 70v1 71v1 72v1 98v1 7Av1 5Dv1
Z-Wave Syncing - retrieved encrypt commands: 20 80 62 63 85 70 71 5D
Z-Wave Syncing - retrieved capabilities: routing, battery, beaming, security, frequentWaking
Z-Wave Syncing - retrieved group 1 associations: []
Z-Wave Syncing - added group 1 association to interface
Z-Wave Syncing - retrieved battery level of 100%
Z-Wave Syncing - created device "010 - Door Lock (BE369/468/469)"
Z-Wave Syncing - complete
Z-Wave sent "010 - Door Lock (BE369/468/469)" status request
Z-Wave received "010 - Door Lock (BE369/468/469)" status update is locked
Z-Wave received "010 - Door Lock (BE369/468/469)" status update battery level 100%
Don't know about the z-wave lock manager plugin, so I guess I will play around with that now!
Thanks everyone for your help!
Peter