I have just experienced a similar, but different issue.
I had a trigger set up to turn on a light after dark if the lock was unlocked by "
any code". This has worked OK prior to (I think) upgrade to the 2022.X.X versions of Indigo on OSX 10.13.6 (High Sierra) and using Zwave Lock Manager 3.0.66.
Whilst Lock Manager is correctly reporting operation of the lock and firing the trigger with the trigger set to trigger by "
keypad unlocked by a specified code" (user 1):
- Code: Select all
Z-Wave received "Front Door Deadbolt (YRD210/220/240)" status update unlocked (via keypad)
Z-Wave Lock Manager Status: User 1 unlocked door [Node: 5]
Trigger Passage Light - Front Door Lock - RHM
when the trigger is set to "
any code", the lock operation is correctly reported, but the trigger fails to fire:
- Code: Select all
Z-Wave received "Garage Door Deadlock" status update unlocked (via keypad)
Z-Wave Lock Manager Status: User 13 unlocked door [Node: 13]
The trigger also fails to fire if the trigger is set to "
Unlocked by Master Code":
- Code: Select all
Z-Wave received "Rear Door Deadbolt (YRD210/220/240)" status update unlocked (via keypad)
Z-Wave Lock Manager Status: User 251 unlocked door [Node: 15]
As I have three separate Yale YRD210/220/240 locks, each with their own individual triggers and all exhibiting the same behaviour, I suspect that the issue may be with Indigo and/or Lock Manager. I have re-synched the locks as suggested in previous posts.
Rather than have individual triggers for all users, I am seeking assistance in getting "
Unlocked by Any Code" working again.
Thanks in advance for any suggestions!
mclass