Maintenance releases of Indigo 7.1 (7.1.1, etc) are outlined below this post on this forum topic.
This update adds support for the following home automation devices:
- Aeotec Garage Door Controller (ZW062).
- Aeotec Nano Dimmer with Energy Reporting (ZW111).
- Aeotec Nano Switch (ZW139).
- Aeotec Nano Switch with Energy Reporting (ZW116).
- Aeotec Dual Nano Switch (ZW140).
- Aeotec Dual Nano Switch with Energy Reporting (ZW132).
- Aeotec WallMote (ZW129).
- Aeotec Water Sensor 6 (ZW122).
- Aeotec Recessed Door Sensor (ZW089) - additional model ID variant.
- Aeotec Smart Energy Switch (ZW075) - additional model ID variant.
- Aeotec Heavy Duty Switch (ZW078) - additional model ID variant.
- Black Cat Motion Sensor (ZWBCCE21S).
- Duwi Key Fob (ZME-KFOB) - additional model ID variant.
- Ecolink Garage Door Tilt Sensor (TILT-ZWAVE2).
- Everspring Appliance Module (AN163).
- Fibaro Door/Window Sensor 2 (FGDW002).
- Fibaro Wall Plug Relay (FGWP102).
- Fibaro Keyfob (FGKF601).
- Fibaro Double Switch 2 (FGS223) - additional model ID variant.
- Fibaro Door/Window Sensor (FGK10x) - additional model ID variant.
- FortrezZ I/O Module (MIMO2+) - additional model ID variant.
- FortrezZ Water Valve (WV01) - additional model ID variant.
- FortrezZ Water/Temperature Sensor (FTS05).
- Heiman Door/Window Sensor (HS1DS).
- Heiman Motion Sensor (HS1MS-Z) - preliminary support.
- Horstmann Temperature Sensor (SES302/SES303).
- Neo CoolCam Door/Window Sensor (NIP28).
- Neo CoolCam Double Relay Switch (NAS-SC01Z).
- Neo CoolCam Motion Sensor (NAS-PD02Z).
- Neo CoolCam Siren.
- Neo CoolCam Smart Power Plug (NAS-WR01ZE) - preliminary support.
- Neo CoolCam Water Sensor (WS01Z) - preliminary support.
- Philio Multi Sensor (PAT02-B).
- Stelpro Thermostat (STZW402+).
- Yale Keyfree Connected Lock.
- Zipato Multi Sensor 4 in 1 (ZD2201).
Additional improvements include:
- Added Z-Wave internal (scriptable) action to assign return route for nodes.
- Added Z-Wave module address (node ID) information to progress messages.
- Added Z-Wave filter logic to prevent logging of duplicate Aeotec Multi Sensor value messages.
- Added tamper switch device for Vision Siren (AM1601). Re-Sync the device to update the UI shown.
- Added main window device search/filtering on model and protocol names.
- Added support for a new Web server public (no authentication used) folder path.
- Improved Web server caching for both browsers and Indigo Touch.
- Improved decoding of UTF8 python script files.
- Improved Z-Wave support for LinearLinc Garage Door Controller (GD00Z-2, GD00Z-4).
- Improved Z-Wave support for POPP Smoke Detector and Siren (004001) so that smoke device state is updated correctly on detection.
- Improved Z-Wave support for some Schlage BE369 locks that require group #2 association for broadcasting state changes.
- Modified response to Z-Wave low battery messages to change the device's battery level to 5% (versus previous 0%).
- Modified SQL Logger plugin to prevent device state and internal column name collisions.
- Modified Z-Wave power (Watts) states to allow for negative values (useful for solar/wind systems).
- Modified Z-Wave NuTone Garage Door Controller (NGD00Z) definition to fix problem that caused the open/close actions to be ignored.
- Modified Z-Wave Vision Garage Door Tilt Sensor (ZG8101) definition to enable support for Tamper Switch.
- Modified Z-Wave Vision Zooz Multi Sensor (ZSE40) definition to allow lumincance sensitivity to be disabled (set to 0).
- Modified Z-Wave Aeotec Home Energy Monitor (ZW095) UI to allow polling every 30 seconds (previous minimum was every 2 minutes).
- Modified lower bounds for white temperature UI slider to 1200.
- Fixed bug that would cause (on some Macs) start local server setting changes to be ignored on server restarts.
- Fixed sunset and sunrise calculation error that would happen at some locations.
- Worked around bug in Z-Wave Aeotec ZW095 module (3 clamp version) that causes it to fail to sync with Indigo.
- Airfoil Pro Plugin: added correct error message when trying to restore speaker states before states are saved.
- Airfoil Pro Plugin: tweaked menu item name to indicate that selecting it will open a dialog.
- WeatherSnoop Plugin: fixed unicode character issue when creating a device for an agent that contains unicode characters.
Developer API Changes:
- Fixed bug that prevented serialport type Field inside ConfigUI elements from working correctly inside DeviceFactory elements.
- Plugin API addition: Added new device instance properties, WhiteTemperatureMin and WhiteTemperatureMax, which can be used to define the lower and upper bounds of the white temperature UI slider.