evansgo wrote:You were really unlucky! That one was up for about 20 mins or less.....
That has been the story of my life the last few years, hehe!
Sent from my iPhone using Tapatalk Pro
Feature Requests -- UDM Pro Support and backup file archival
- durosity offline
-
- Posts: 4320
- Joined: May 10, 2012
- Location: Newcastle Upon Tyne, Ye Ol' England.
Re: Feature Requests -- UDM Pro Support and backup file arch
That has been the story of my life the last few years, hehe!
Sent from my iPhone using Tapatalk Pro
Computer says no.
- petematheson offline
- Posts: 847
- Joined: Sep 14, 2014
- Location: Southampton, UK
Re: Feature Requests -- UDM Pro Support and backup file arch
+1 for this thread, swapped out my USG to a UDM Pro last week, had all sorts of issues and had to set it up from scratch...
Have enabled SSH on all devices and the UDM Pro but getting a spam of
uniFiAP Error getMessages: (1 - test connect) error for SWdict, ip#: 192.168.0.182 wrong ip/ password or system down or ssh timed out or ..?
uniFiAP Error testServerIf ssh connection OK: userid>><<, passwd>><< wrong for APdict-192.168.0.238
uniFiAP Error getMessages: (1 - test connect) error for APdict, ip#: 192.168.0.238 wrong ip/ password or system down or ssh timed out or ..?
uniFiAP Error testServerIf ssh connection OK: userid>><<, passwd>><< wrong for APtail-192.168.0.191
uniFiAP Error getMessages: (1 - test connect) error for APtail, ip#: 192.168.0.191 wrong ip/ password or system down or ssh timed out or ..?
uniFiAP Error testServerIf ssh connection OK: userid>><<, passwd>><< wrong for APdict-192.168.0.191
I can login just fine with terminal / ssh direct with root & the PW I've set.
Plugin version 7.30.238
Not sure what I should be checking / unchecking at the moment so will keep an eye on this thread, it looks like it's all in hand already
Have enabled SSH on all devices and the UDM Pro but getting a spam of
uniFiAP Error getMessages: (1 - test connect) error for SWdict, ip#: 192.168.0.182 wrong ip/ password or system down or ssh timed out or ..?
uniFiAP Error testServerIf ssh connection OK: userid>><<, passwd>><< wrong for APdict-192.168.0.238
uniFiAP Error getMessages: (1 - test connect) error for APdict, ip#: 192.168.0.238 wrong ip/ password or system down or ssh timed out or ..?
uniFiAP Error testServerIf ssh connection OK: userid>><<, passwd>><< wrong for APtail-192.168.0.191
uniFiAP Error getMessages: (1 - test connect) error for APtail, ip#: 192.168.0.191 wrong ip/ password or system down or ssh timed out or ..?
uniFiAP Error testServerIf ssh connection OK: userid>><<, passwd>><< wrong for APdict-192.168.0.191
I can login just fine with terminal / ssh direct with root & the PW I've set.
Plugin version 7.30.238
Not sure what I should be checking / unchecking at the moment so will keep an eye on this thread, it looks like it's all in hand already
- kw123 offline
-
- Posts: 8360
- Joined: May 12, 2013
- Location: Dallas, TX
Re: Feature Requests -- UDM Pro Support and backup file arch
There are 3 userid/ password sets
Make sure you have set them correctly.
Regular ssh to ap sw etc
Ssh to UDM
Http to UDM
[EDIT]switch on expect debug. and in plugin.log you can see the command line used. that should tell you if your userid.. etc are correct
Sent from my iPhone using Tapatalk
Make sure you have set them correctly.
Regular ssh to ap sw etc
Ssh to UDM
Http to UDM
[EDIT]switch on expect debug. and in plugin.log you can see the command line used. that should tell you if your userid.. etc are correct
Sent from my iPhone using Tapatalk
- petematheson offline
- Posts: 847
- Joined: Sep 14, 2014
- Location: Southampton, UK
Re: Feature Requests -- UDM Pro Support and backup file arch
Bingo, that's all the AP's and switches now OK. Just the UDM Pro Controller itself not working for me now, not sure if I should be using a root / password or my Unifi cloud login details here? (Or if it works yet in the plugin)
- kw123 offline
-
- Posts: 8360
- Joined: May 12, 2013
- Location: Dallas, TX
Feature Requests -- UDM Pro Support and backup file archival
The UDM has 2 userids
One is the http
The other ssh
What ever you use to get to the system
do a browser http session and a terminal ssh session to the UDM . Use those.
Sent from my iPhone using Tapatalk
One is the http
The other ssh
What ever you use to get to the system
do a browser http session and a terminal ssh session to the UDM . Use those.
Sent from my iPhone using Tapatalk
- petematheson offline
- Posts: 847
- Joined: Sep 14, 2014
- Location: Southampton, UK
Re: Feature Requests -- UDM Pro Support and backup file arch
I must be missing something here as still getting failed in the log when I can login via SSH and browser OK.
I've set the ssh unix UDM UserID and password to root and my password, although it seems to be giving me a HTML error.
In the Controller section I've got UDM Mode for WiFi.
192.168.0.1 for the controller and port 443, everything else left default.
I've got UDM Active checked and also set to the IP address.
501 76494 76198 0 12:51PM ?? 0:00.07 /usr/bin/expect /Library/Application Support/Perceptive Automation/Indigo 7.4/Plugins/uniFiAP.indigoPlugin/Contents/Server Plugin/dictLoop.exp root [password] 192.168.0.1
12:52:30 killing expect w ip# 76498:
2020-05-14 12:52:39.103 ERROR Plugin.executeCMDOnController UNIFI executeCMDOnController error no json object: (wrong UID/passwd, ip number?192.168.0.1) ...>>
<!doctype html>
<html lang="en">
<head>
<meta charset="utf-8">
<meta name="viewport" content="width=device-width,initial-scale=1"><link href="/2.css" rel="stylesheet"></head>
<body>
<div id="root"></div>
<script type="text/javascript" src="/vendor.d717d8b7.chunk.js"></script><script type="text/javascript" src="/main.c8dbef72.js"></script></body>
</html>
<<
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
100 437 100 357 100 80 11900 2666 --:--:-- --:--:-- --:--:-- 14566
I've set the ssh unix UDM UserID and password to root and my password, although it seems to be giving me a HTML error.
In the Controller section I've got UDM Mode for WiFi.
192.168.0.1 for the controller and port 443, everything else left default.
I've got UDM Active checked and also set to the IP address.
501 76494 76198 0 12:51PM ?? 0:00.07 /usr/bin/expect /Library/Application Support/Perceptive Automation/Indigo 7.4/Plugins/uniFiAP.indigoPlugin/Contents/Server Plugin/dictLoop.exp root [password] 192.168.0.1
12:52:30 killing expect w ip# 76498:
2020-05-14 12:52:39.103 ERROR Plugin.executeCMDOnController UNIFI executeCMDOnController error no json object: (wrong UID/passwd, ip number?192.168.0.1) ...>>
<!doctype html>
<html lang="en">
<head>
<meta charset="utf-8">
<meta name="viewport" content="width=device-width,initial-scale=1"><link href="/2.css" rel="stylesheet"></head>
<body>
<div id="root"></div>
<script type="text/javascript" src="/vendor.d717d8b7.chunk.js"></script><script type="text/javascript" src="/main.c8dbef72.js"></script></body>
</html>
<<
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
100 437 100 357 100 80 11900 2666 --:--:-- --:--:-- --:--:-- 14566
- kw123 offline
-
- Posts: 8360
- Joined: May 12, 2013
- Location: Dallas, TX
Re: Feature Requests -- UDM Pro Support and backup file arch
could you do a print config parameters to logfile in menu print parameters..
that should list the users and passwords used
the http userid/passwd is "hardwired" to
that should list the users and passwords used
the http userid/passwd is "hardwired" to
- Code: Select all
<Field id="unifiCONTROLLERUserID" type="textfield" defaultValue="" >
<Label>1. ............................. http: web UserID for CONTROLLER/UDM:</Label>
</Field>
<Field id="unifiCONTROLLERPassWd" type="textfield" defaultValue="" >
<Label>... password:</Label>
</Field>
- Attachments
-
- Screen Shot 2020-05-14 at 13.38.34.png (42.88 KiB) Viewed 2806 times
- petematheson offline
- Posts: 847
- Joined: Sep 14, 2014
- Location: Southampton, UK
Re: Feature Requests -- UDM Pro Support and backup file arch
Got this - and the UN/PW all look OK. I tried changing the username from my email address to my actual username and still the same error.
20:27:59 -====== CONTROLLER/UDM WEB ACCESS , set parameters and reporting
20:27:59 - curl data={WEB-UserID:..,WEB-PassWd:..} https://controllerIP: ..--------------
20:27:59 -Mode: off, ON, reports only UDM
20:27:59 -WEB-UserID pete@xxxxxxxx
20:27:59 -WEB-PassWd [mypassword]
20:27:59 -Controller Type (UDM,..,std) UDMPro
20:27:59 -use strict:true for web login T
20:27:59 -Controller port# 443
20:27:59 -Controller site Name# default
20:27:59 -Controller API WebPage /api/s/
20:27:59 -get blocked client info from Cntr every 180[sec]
20:27:59 -get lastseen info from Cntr every 999999999[sec]
20:27:59 -====== CONTROLLER/UDM WEB ACCESS , set parameters and reporting
20:27:59 - curl data={WEB-UserID:..,WEB-PassWd:..} https://controllerIP: ..--------------
20:27:59 -Mode: off, ON, reports only UDM
20:27:59 -WEB-UserID pete@xxxxxxxx
20:27:59 -WEB-PassWd [mypassword]
20:27:59 -Controller Type (UDM,..,std) UDMPro
20:27:59 -use strict:true for web login T
20:27:59 -Controller port# 443
20:27:59 -Controller site Name# default
20:27:59 -Controller API WebPage /api/s/
20:27:59 -get blocked client info from Cntr every 180[sec]
20:27:59 -get lastseen info from Cntr every 999999999[sec]
- kw123 offline
-
- Posts: 8360
- Joined: May 12, 2013
- Location: Dallas, TX
Re: Feature Requests -- UDM Pro Support and backup file arch
check the controller settings in config, SHOULD be for the UDM-pro like this
naturally w your ip# of the UDMpro
I believe your settings are for the UDM not the pro
but try it out
Karl
- Screen Shot 2020-05-14 at 15.31.57.png (88.45 KiB) Viewed 2788 times
naturally w your ip# of the UDMpro
I believe your settings are for the UDM not the pro
but try it out
Karl
- petematheson offline
- Posts: 847
- Joined: Sep 14, 2014
- Location: Southampton, UK
Re: Feature Requests -- UDM Pro Support and backup file arch
Ahhh, so I had a few things wrong here I think.
I had no drop down for UDM-Pro as controller info I had set to UDM Mode.
Also the http" API Web and Login page URL's were wrong.
I also had the section below checked for UDM Active, which I'm guessing isn't needed for the Pro?
I've restarted the plugin a couple of times and no longer getting a string of errors, so that sounds good!
Thank you
I had no drop down for UDM-Pro as controller info I had set to UDM Mode.
Also the http" API Web and Login page URL's were wrong.
I also had the section below checked for UDM Active, which I'm guessing isn't needed for the Pro?
I've restarted the plugin a couple of times and no longer getting a string of errors, so that sounds good!
Thank you
- hamw offline
- Posts: 1212
- Joined: Mar 31, 2008
Re: Feature Requests -- UDM Pro Support and backup file arch
Just got a UDM, not pro, and am excited about this plugin. However, try as I might, I keep getting a login error for the UDM. I have read the entire thread. Here's the persistent error:
It's set up at 10.0.1.1. I can SSH into the UDM with root@10.0.1.1 then password with no problem.
I have two factor authentication turned on, which may be a problem? What should the webID be?
- Code: Select all
uniFiAP Error UNIFI executeCMDOnController error: (wrong UID/passwd, ip number?10.0.1.1) ...>>{"meta":{"rc":"error","msg":"api.err.LoginRequired"},"data":[]}<<
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
100 126 100 63 100 63 2070 2070 --:--:-- --:--:-- --:--:-- 2032
It's set up at 10.0.1.1. I can SSH into the UDM with root@10.0.1.1 then password with no problem.
- Code: Select all
root@10.0.1.1's password:
___ ___ .__________.__
| | |____ |__\_ ____/__|
| | / \| || __) | | (c) 2010-2019
| | | | \ || \ | | Ubiquiti Networks, Inc.
|______|___| /__||__/ |__|
|_/ http://www.ui.com
Welcome to UniFi Dream Machine!
I have two factor authentication turned on, which may be a problem? What should the webID be?
- kw123 offline
-
- Posts: 8360
- Joined: May 12, 2013
- Location: Dallas, TX
Re: Feature Requests -- UDM Pro Support and backup file arch
see https://forums.indigodomo.com/viewtopic.php?f=199&t=23969
for UDM non pro setup
which webID ? the site ID that is default?
leave that at default !!!! As mentioned in the other thread only if you have very complex setup with various sites this name can be something else than default
I should remove that option.
Karl
for UDM non pro setup
which webID ? the site ID that is default?
leave that at default !!!! As mentioned in the other thread only if you have very complex setup with various sites this name can be something else than default
I should remove that option.
Karl
- hamw offline
- Posts: 1212
- Joined: Mar 31, 2008
Re: Feature Requests -- UDM Pro Support and backup file arch
Hi Karl,
I posted a pic of my config, without passwords, at the other thread here....
https://forums.indigodomo.com/viewtopic.php?f=199&t=23460&p=192272#p192272
I posted a pic of my config, without passwords, at the other thread here....
https://forums.indigodomo.com/viewtopic.php?f=199&t=23460&p=192272#p192272
- Ramias offline
- Posts: 272
- Joined: Nov 24, 2015
Re: Feature Requests -- UDM Pro Support and backup file arch
Hi Karl
I wonder if you can add CPU support for the UDM Pro to a future release. Since UDMP is more than just the network controller CPU temp doesn't seem to come from the network controller API via curl but you can get to it via SSH: with the sensors -u command. temp1_input is the value. My use case isn't totally mission critical. I just thing it would be interesting to graph temp over time in Grafana.
Thanks
I wonder if you can add CPU support for the UDM Pro to a future release. Since UDMP is more than just the network controller CPU temp doesn't seem to come from the network controller API via curl but you can get to it via SSH: with the sensors -u command. temp1_input is the value. My use case isn't totally mission critical. I just thing it would be interesting to graph temp over time in Grafana.
Thanks
- Code: Select all
# sensors -u
adt7475-i2c-4-2e
Adapter: i2c-0-mux (chan_id 3)
in1:
in1_input: 0.885
in1_min: 0.000
in1_max: 2.988
in1_alarm: 0.000
+3.3V:
in2_input: 3.256
in2_min: 0.000
in2_max: 4.388
in2_alarm: 0.000
fan1:
fan1_input: 2776.000
fan1_min: 0.000
fan1_alarm: 0.000
fan2:
fan2_input: 4667.000
fan2_min: 0.000
fan2_alarm: 0.000
fan3:
fan3_input: 0.000
fan3_min: 0.000
fan3_alarm: 0.000
fan4:
fan4_input: 0.000
fan4_min: 0.000
fan4_alarm: 0.000
temp1:
temp1_input: 38.500
temp1_max: 191.000
temp1_min: -63.000
temp1_crit: 100.000
temp1_crit_hyst: 96.000
temp1_alarm: 0.000
temp1_fault: 0.000
temp1_offset: 0.000
Board Temp:
temp2_input: 37.000
temp2_max: 191.000
temp2_min: -63.000
temp2_crit: 100.000
temp2_crit_hyst: 96.000
temp2_alarm: 0.000
temp2_offset: 0.000
temp3:
temp3_input: 37.750
temp3_max: 191.000
temp3_min: -63.000
temp3_crit: 100.000
temp3_crit_hyst: 96.000
temp3_alarm: 0.000
temp3_fault: 0.000
temp3_offset: 0.000
#
- kw123 offline
-
- Posts: 8360
- Joined: May 12, 2013
- Location: Dallas, TX
Re: Feature Requests -- UDM Pro Support and backup file arch
please try: https://github.com/kw123/unifi/releases/tag/v7.30.250
still has debug statements: you should see 1/minute the ssh command and then the resulting return from the UDP-pro
and it will try to update the states
mapping:
UDMP value .... indigo dev state (GW)
temp1_input --> temperature
temp2_input --> temperature_Board_CPU
temp3_input --> temperature_Board_PHY
this is not tested, as I don't have a UDM(pro)
Karl
still has debug statements: you should see 1/minute the ssh command and then the resulting return from the UDP-pro
and it will try to update the states
mapping:
UDMP value .... indigo dev state (GW)
temp1_input --> temperature
temp2_input --> temperature_Board_CPU
temp3_input --> temperature_Board_PHY
this is not tested, as I don't have a UDM(pro)
Karl
Who is online
Users browsing this forum: No registered users and 6 guests