Newbie help, can’t figure out which tile is the device

Posted on
Wed Dec 19, 2018 8:04 am
mpovolo offline
Posts: 51
Joined: Dec 19, 2018

Newbie help, can’t figure out which tile is the device

I got this all setup with pibeacon seeing devices. But for the life of me I haven’t been able to figure out which entry is my Tile device. I even have the scanner app on my iPhone that sees the tile but none of the numbers it identifies show in the pibeacon table. Any advice on hw to figure this out. I have lie 50 entries to sort through.

Thanks

Posted on
Wed Dec 19, 2018 9:17 am
kw123 offline
User avatar
Posts: 8332
Joined: May 12, 2013
Location: Dallas, TX

Re: Newbie help, can’t figure out which tile is the device

The new tiles do not send bc any more.

The xy 3 are still the best.

In general how to find the proper mac number of beacon

First after some time stop accepting new beacons all your beacons should already be there.
Then put beacon next to the rpi
Wait 2minutes check which beacon is the closest, mark that
Move beacon far away
Wait 2 minutes.
Then check the signal signal/ distance of that ibeacon on that rpi. Should be far away.

Name that beacon and create a folder good beacons. Move that beacon into that folder

Continue with next beacon.

Unfortunately there is no phone app that shows the mac number.



Sent from my iPhone using Tapatalk

Posted on
Wed Dec 19, 2018 9:47 pm
mpovolo offline
Posts: 51
Joined: Dec 19, 2018

Re: Newbie help, can’t figure out which tile is the device

Thank you. The table in indigo does not show signal strength though. Where do you see that.

Thanks

Posted on
Wed Dec 19, 2018 9:54 pm
kw123 offline
User avatar
Posts: 8332
Joined: May 12, 2013
Location: Dallas, TX

Re: Newbie help, can’t figure out which tile is the device

In the iBeacon device states.

Move the states View pane up

There you find some 30+ states

In rpi device states you find the nearest iBeacon


Sent from my iPhone using Tapatalk
Attachments
Screen Shot 2018-12-19 at 9.57.52 PM.png
Screen Shot 2018-12-19 at 9.57.52 PM.png (176.91 KiB) Viewed 1994 times
Screen Shot 2018-12-19 at 9.58.20 PM.png
Screen Shot 2018-12-19 at 9.58.20 PM.png (196.14 KiB) Viewed 1994 times

Posted on
Wed Dec 19, 2018 10:10 pm
mpovolo offline
Posts: 51
Joined: Dec 19, 2018

Re: Newbie help, can’t figure out which tile is the device

Oh my, such a simple thing and never seen that you could pull up that spit window.

thanks so much

Posted on
Thu Dec 20, 2018 5:43 am
kw123 offline
User avatar
Posts: 8332
Joined: May 12, 2013
Location: Dallas, TX

Re: Newbie help, can’t figure out which tile is the device

That’s a common issue. Everyone had to go through that




Sent from my iPhone using Tapatalk

Page 1 of 1

Who is online

Users browsing this forum: No registered users and 1 guest