Reset for MKR1000

Plugin to facilitate the communication (read/write/set PIN config) between INDIGO and an ARDUINO through WiFi/ETHERNET. Included is an example “SKETCH” for an ARDUINO that should work without modifications.
Posts: 50
Joined: Tue May 29, 2018 1:01 pm
Location: Westerham, Kent

Reset for MKR1000

Post by abplus »

Hi, does anyone know what the correct reset pin for the MKR1000 is. In the sketch I have tried 7 and 10 but they don't seem to work.

Thanks !

Return to “ARDUINO Plugin”