Changing Device Group to Colour doesn't work first time

Posted on
Tue Apr 18, 2017 6:50 am
petematheson offline
Posts: 847
Joined: Sep 14, 2014
Location: Southampton, UK

Changing Device Group to Colour doesn't work first time

So I have an action group set to set one set of Fibaro RGBW's to a specific colour, and another to 'Switch off LED and linked groups'.

When I switch on the lights, they go to white. Then when I run the same action group again THEN it sets to the right colour.

So I've worked around this by duplicating the colour setting and delaying it by 1 second in the action group. But is it possible to get this bug ironed out somehow, or have I got my settings in a muddle somewhere?

Posted on
Tue Apr 18, 2017 7:40 pm
matt (support) offline
Site Admin
User avatar
Posts: 21411
Joined: Jan 27, 2003
Location: Texas

Re: Changing Device Group to Colour doesn't work first time

Sounds like a firmware buglet in the Fibaro itself, since Indigo is sending the exact same Z-Wave commands the second time as it does the first time. I think your workaround is going to be the best approach, although it is possible Fibaro has a more recent firmware version that fixes this problem. Not sure what the odds are of that.

Image

Posted on
Wed Apr 19, 2017 7:22 am
petematheson offline
Posts: 847
Joined: Sep 14, 2014
Location: Southampton, UK

Re: Changing Device Group to Colour doesn't work first time

Thanks Matt, I guess I'll have a play to see what I can do. The other modules in the house work ok with similar logic behind them so perhaps it is firmware related.


Sent from my iPhone using Tapatalk

Page 1 of 1

Who is online

Users browsing this forum: No registered users and 1 guest