Page 1 of 1
FINGSCAN events not firing
Posted:
Mon Dec 11, 2017 9:09 am
by Hackencrash
Recently, in the last 2 weeks, I've noticed that my Fingscan events have stopped firing.
I have a trigger set-up as follows:
Type: fingscan Event
Event: EVENT_1_oneHome ...
This no longer appears to work.
Indeed, if I go Indigo > Plugins > fingscan > trigger an event NOW >EVENT_1_oneHome > Execute, my trigger does fire as expected, but it does not fire when one device associated with EVENT_1 becomes online (and the others have been off for a while).
I think I've updated Fingscan twice over the last couple of weeks, so I'm unsure which version broke it.
Re: FINGSCAN events not firing
Posted:
Mon Dec 11, 2017 9:40 am
by kw123
just tried mine,, seems to work.
could you send me the config of THAT event?
Karl
Re: FINGSCAN events not firing
Posted:
Mon Dec 11, 2017 11:28 am
by Hackencrash
Hi Karl,
Before I ran this manually, it had a date of 1st December, similar to my other 7 events for other people's phones whom have been here on and off since then:
- Code: Select all
fingscan EVENT:------------- 1 ---------------------------------------------------------------
fingscan dev#: 1 -- deviceName:Rich iPhoneX WiFi -- MAC#:40:98:AD:2B:2F:8D -- ip#:192.168.1.251 -- status:up -- WiFi:
fingscan dev#: 25 -- deviceName:Rich iPhoneX Bluetooth -- IND#:375114353 -- -- status:up
fingscan currentStatusHome: # 1: HOME #25: HOME
fingscan currentStatusAway: # 1: 0 #25: 0
fingscan time WhenLast DOWN: # 1: 15:58:23 #25: 15:35:23
fingscan time WhenLast UP: # 1: 17:18:24 #25: 17:18:24
fingscan seconds WhenLast UP: # 1: 63 #25: 63
fingscan seconds WhenLast DOWN:# 1: 4864 #25: 6244
fingscan Time right now: : 17:19:25
fingscan ALL Devices Home : 1 -- reacts after minTimeNotHome
fingscan AtLeast ONE Device Home : 1 -- reacts after minTimeNotHome
fingscan ALL Devices Away : 0 -- reacts minTimeAway bf Trig
fingscan AtLeast ONE Device Away : 0 -- reacts minTimeAway bf Trig
fingscan minTimeAway bf Trig : 1800
fingscan minTimeNotHome bf re-Trig: -1
fingscan Event enabled : 1
fingscan dataFormat : 3.0
Re: FINGSCAN events not firing
Posted:
Mon Dec 11, 2017 11:58 am
by kw123
i changed the event name (id)
11:42:43 EVENT -testing trigger id: 1107067286; eventId:EVENT-12-oneHome; EVENT_12_oneHome
did not change in the plugin at ONE point
Re: FINGSCAN events not firing
Posted:
Thu Dec 14, 2017 12:31 am
by vtmikel
This also was happening for me. Specifically with Event 1. I changed my trigger to be based on the variable change rather than the event a while ago. This is working fine.
Sent from my iPhone using Tapatalk Pro
Re: FINGSCAN events not firing
Posted:
Thu Dec 14, 2017 7:40 am
by Hackencrash
Latest Fingscan fixes this - thanks Karl
Sent from my iPhone using Tapatalk