[ANSWERED]: Fibaro motion not fully working

Posted on
Thu Mar 24, 2016 1:24 am
GD1210 offline
Posts: 20
Joined: Mar 03, 2016

[ANSWERED]: Fibaro motion not fully working

This is probably the wrong place to post this but I've finally had a decent chance to add more hardware to the system.

The Fibaro motion sensor synced ok but has not shown any temperature yet.
The lux level came through after a while but even after leaving it over night still no temperature.

I have a aeon labs gen5 stick.

Any ideas?


Sent from my iPhone using Tapatalk

Posted on
Thu Mar 24, 2016 9:52 am
matt (support) offline
Site Admin
User avatar
Posts: 21411
Joined: Jan 27, 2003
Location: Texas

Re: Fibaro motion not fully working

Have you changed the "Temperature change reporting interval" setting parameter? Note you have to wait until the module wakes for the parameter change to be written, then you have to wait until the reporting interval time lapses, and finally it should report the temperature.

Image

Posted on
Thu Mar 24, 2016 10:40 am
GD1210 offline
Posts: 20
Joined: Mar 03, 2016

Re: [ANSWERED]: Fibaro motion not fully working

Thanks


Sent from my iPhone using Tapatalk

Page 1 of 1

Who is online

Users browsing this forum: No registered users and 1 guest