I just took delivery of the Aeotec Z-Stick Get5. I am using an older iMac with the latest OS capable of being installed which is Mavericks. I am using a trial version of Indigo7 and will purchase once I have some use under my belt. In following the instruction, I plugged the stick into a free USB and noticed that the light around the action button on the Z-Stick toggles between Red Blue and Yellow.
In trying to configure I have followed these steps as obtained from the support page for getting started:
I nterface plugged into a USB port,
1 Choose the Interfaces→Z-Wave→Enable menu item. This should cause the Configure Z-Wave dialog to open automatically (but only the first time you enable Z-Wave - you can select the Interfaces→Z-Wave→Configure… menu item to get back to the configuration dialog later):
2 The default Connection Type of Local (physical) is correct (assuming you've plugged your Z-Stick directly into your Mac).
3 On the Serial Port popup, (for Z-Stick Gen5),I have chosen the appropriate port ID
4 I have left the Show debug logging of interface communication checkbox unchecked and saved the Configure Z-Wave dialog.
Having followed these instructions The z-stick action button continues to flash/toggle between Red Blue and Yellow and is not recognized.
What am I missing?
DaveL