Indigo Domotics

I have installed the Plugin and it seems to work correctly (However it is summer so the heating isn't switched on at the moment)
The only issue I have is the following error message
Honeywell Error [Sat Jun 16 13:40:53 2018] Cannot read device data for: EV Loc: Home
Honeywell Error [Sat Jun 16 13:40:53 2018] Failed to retrieve thermostat status for: EV Loc: Home
The controller and the thermostats are being correctly updated.
What does the EV Location refer to?

Tim

I have the same problem intermittently over the last couple of months. Everything seens to work ok though so I decided to simply ignore the error.


Verzonden vanaf mijn iPhone met Tapatalk

Yes I am getting this error more and more. In the last ten minutes

Code: Select all

16 Jun 2018, 14:04:59
   Honeywell Error                 [Sat Jun 16 14:04:59 2018] Cannot read device data for: EV Loc: Highsteads
   Honeywell Error                 [Sat Jun 16 14:04:59 2018] Failed to retrieve thermostat status for: EV Loc: Highsteads

16 Jun 2018, 14:08:13
   Z-Wave                          received "Strips" sensor update to 15.8 °C
   Action Collection               
   Action Collection               
   Script                          Strips Temp is      15.8 °C
   Script                          Underground Temp is 15.1 °C

16 Jun 2018, 14:09:35
   Honeywell Error                 [Sat Jun 16 14:09:35 2018] Cannot read device data for: EV Loc: Highsteads
   Honeywell Error                 [Sat Jun 16 14:09:35 2018] Failed to retrieve thermostat status for: EV Loc: Highsteads

16 Jun 2018, 14:11:38
   Honeywell Error                 [Sat Jun 16 14:11:38 2018] Cannot read device data for: EV Loc: Highsteads
   Honeywell Error                 [Sat Jun 16 14:11:38 2018] Failed to retrieve thermostat status for: EV Loc: Highsteads

16 Jun 2018, 14:13:10
   Trigger                         EvoHome Hall-Kitchen Temperature Change
   Action Collection               Hall-Kitchen Temperature is 18.5
   Action Collection               Hall-Kitchen Setpoint Is 12.0
   Action Collection               
   Trigger                         EvoHome Living Room Front Temperature Change
   Action Collection               Living Room Front Temperature is 18
   Action Collection               Living Room Front Setpoint is 12.0
   Action Collection               

16 Jun 2018, 14:13:41
   Honeywell Error                 [Sat Jun 16 14:13:41 2018] Cannot read device data for: EV Loc: Highsteads
   Honeywell Error                 [Sat Jun 16 14:13:41 2018] Failed to retrieve thermostat status for: EV Loc: Highsteads


Just wondering if this is Honeywell's computers not being able to keep up with the increasing amount of users updating. The big downside of cloud computing!!

Good to know I am not alone with this issue.
I still do not understand what this is device actually does.

I’m getting the same.

I’ll try dig out my old Evohome plugin which predates Nick’s officially sanctioned version and see if I can see owt.


Sent from my iPhone using Tapatalk Pro

Strange I don't see this same error running v0.5.1 of the plugin. I have 2 locations setup due to having 2 controllers as I had to many zones for one controller and both locations are working fine for me with no errors in the log.

Suncroft wrote:

2 controllers as I had to many zones for one controller

Buckingham Palace?
The White House?

Sevilsivle wrote:

Buckingham Palace?
The White House?

Not quite though it feels like it when I have to order heating oil, 5 zones of underfloor heating and 11 zones with radiator valves. I think the max on one controller is 12 zones.