So you were right, I forgot that the TCP firmware is buried on another page...
but, it is still behaving a bit oddly. Here's the log:
- Code: Select all
May 27, 2013 9:57:08 PM
Autelis Jandy Saved Plugin Configuration
Autelis Jandy Socket: 10.0.1.40:6000 closed succesfully
Autelis Jandy Socket: 10.0.1.40:6000 connected succesfully
May 27, 2013 9:57:42 PM
Trigger Pool Pump OFF TIME
Schedule Pool Pump OFF TIME (delayed action)
Action Collection Pool Pump OFF 05-27 21:57
Ignored device "Pool" action request (communication is disabled)
Ignored device "Pool" action request (communication is disabled)
The "Pool" device icon is greyed out, even though there is data in the little box below. I can't use my iPhone control page to control the pool -- tried recreating the buttons even -- but action groups from Indigo work and the plugin will update the variable states.
edit: the temp setpoint buttons for both the spa and pool setpoints work, and the keypad emulation lines update in the status box on the bottom, along with the SWG status.
- Code: Select all
May 27, 2013 10:14:45 PM
Schedule Pool Cleaner Schedule PM 4:30
Schedule Pool Cleaner Schedule PM 4:30
Schedule Pool Auto Off Pump Cleaner 11:00 PM Sun Thu
Trigger Pool Pump Cleaner OFF TIME
Action Collection Pool Pump ON 05-27 22:15
Trigger Pool Pump OFF TIME
Trigger Pool Heater Pool off/enabled/on Set Pool_Heat_Pool_Status for Pool_Heat_Actual_Status
Schedule Pool Pump OFF TIME (delayed action)
Action Collection Pool Pump OFF 05-27 22:15
Schedule Pool Auto Off Pump Cleaner 11:00 PM Sun Thu (delayed action)
Schedule Pool Auto Off Pump Cleaner 2:00 AM Fri Sat (delayed action)
May 27, 2013 10:15:39 PM
Schedule Pool Auto Off Pump Cleaner 2:00 AM Fri Sat
Schedule Pool Auto Off Pump Cleaner 2:00 AM Fri Sat (delayed action)
Schedule Pool Auto Off Pump Cleaner 2:00 AM Fri Sat (delayed action)
May 27, 2013 10:16:48 PM
Ignored device "Pool" action request (communication is disabled)