Hello again,
I'm nearly there for this project! I've spend days trying to get it working and finally getting some results! I've had some great help from the chap on Github who wrote the code for the inverter,
https://github.com/jblance/mpp-solar/issues/10 but I need some help on what to do with the MQTT plugin.
This is what i've got so far:-
1, I've got communication between the Mosquito broker on the raspberry pi and Indigo / MQTT plugin,
2, I can post all the data from my inverter via MQTT and see it on the network, (see the screen shot below)
3, I've managed to get some success with displaying on a control page, i've got this working with one payload but can't figure out how to add additional payloads and where they appear on a control page.
What i'm struggling with is what to put into the MQTT plugin to receive the data?
These are the things i'm confused about.
1, For a topic, if i add
92331809100013/status/battery_capacity/value to the Device section under Topic Subscriptions (see screen shot below) i can have this data showing on a control page, but if i add any more topics they don't appear in the device state, i just get Status and two Topics?
2, I'm assuming i need to add each line of code as a separate topic, but where do i add these?
Any help would be great, thanks
Martin