Re: Pentair Intellitouch Plugin
Posted: Mon Apr 09, 2018 1:35 pm
I missed the step about using a firmware "Force Update".
I updated the Autelis firmware (again) to 1.6.7. This time I used the "Force Update" mode. That appears to have solved the communications issue. I now can set up a "system" device. Now my problem is how do I "decode" the IntelliTouch circuits to my EasyTouch? Here's my situation:
All my pool equipment is Pentair. I have an EasyTouch 8 panel with a single valve system and VS pump. The valve is motor driven to either run the floor cleaner (and the IC40 SWG) or the skimmer. I believe these are 2 separate circuits. I want to be able to view and control the status of the pump (on/off) and its current speed. I also want to control the Intelibrite lighting ( (on/off) and color. How do I go about doing that via your plug-in?
Thanks for the plug-in and appreciate any advice on how to use it!
I updated the Autelis firmware (again) to 1.6.7. This time I used the "Force Update" mode. That appears to have solved the communications issue. I now can set up a "system" device. Now my problem is how do I "decode" the IntelliTouch circuits to my EasyTouch? Here's my situation:
All my pool equipment is Pentair. I have an EasyTouch 8 panel with a single valve system and VS pump. The valve is motor driven to either run the floor cleaner (and the IC40 SWG) or the skimmer. I believe these are 2 separate circuits. I want to be able to view and control the status of the pump (on/off) and its current speed. I also want to control the Intelibrite lighting ( (on/off) and color. How do I go about doing that via your plug-in?
Thanks for the plug-in and appreciate any advice on how to use it!