Yes it is lot of thermostats, together with my 6 Nest Protect devices I have will have 17 units in total which is above the 16 maximum allowed in the Nest App. I'm hoping that I can find a workaround to this but if not it isn't the end of the world.
I'm hoping this is my last request for help.
Thanks to Dave the plugin is now talking to the Nest unit (via the internet control app) but I am not able to change the heat set point from Indigo.
I have tried various things including rebooting my machine. Some key points that I have noted
- I can change the heat mode perfectly, when doing this the log entry items look the same as for the heat set point
- If I change the temperature to fahrenheit it works perfectly, any heat set points I adjust in Indigo are reflected on the Nest
- When I change it back to celsius it stops working
Below is a copy of my log file. The first four lines are related to the heat set point change request which isn't updated on the Nest device. The remaining lines are for the heat mode change request. These are reflected on the Nest device.
8 Oct 2014 14:43:55
Yet Another Nest Thermostat Plugin About to request:
http://127.0.0.1:13243/?deviceSerial=xx ... Value=17.5 Yet Another Nest Thermostat Plugin About to request:
http://127.0.0.1:13243/?deviceSerial=xx ... Value=17.5 Yet Another Nest Thermostat Plugin sent "Hallway" increase heat setpoint to 17.5
Yet Another Nest Thermostat Plugin ** Set target_temperature
Yet Another Nest Thermostat Plugin About to request:
http://127.0.0.1:13243/?deviceSerial=xx ... tValue=off Yet Another Nest Thermostat Plugin About to request:
http://127.0.0.1:13243/?deviceSerial=xx ... tValue=off Yet Another Nest Thermostat Plugin sent "Hallway" mode change to off
Yet Another Nest Thermostat Plugin ** Set temperature mode to off
Yet Another Nest Thermostat Plugin {"touched_by":{},"auto_away":0,"auto_away_learning":"ready","hvac_heat_x3_state":false,"compressor_lockout_enabled":false,"hvac_alt_heat_state":false,"target_temperature_type":"off","hvac_heater_state":false,"hvac_emer_heat_state":false,"can_heat":true,"compressor_lockout_timeout":0,"hvac_cool_x2_state":false,"target_temperature_high":24,"hvac_aux_heater_state":false,"hvac_heat_x2_state":false,"target_temperature_low":20,"hvac_ac_state":false,"target_temperature":16.5,"hvac_fan_state":false,"target_change_pending":false,"name":"","current_temperature":20.76,"hvac_alt_heat_x2_state":false,"can_cool":false,"$version":"27126","$timestamp":"1412775839891","serial":"xxxx"}
Yet Another Nest Thermostat Plugin obtained a device update... going to process: {u'hvac_ac_state': False, u'compressor_lockout_timeout': 0, u'hvac_alt_heat_x2_state': False, u'compressor_lockout_enabled': False, u'target_temperature': 16.5, u'serial': u'xxxx', u'auto_away': 0, u'can_heat': True, u'hvac_aux_heater_state': False, u'target_change_pending': False, u'hvac_heat_x2_state': False, u'target_temperature_low': 20, u'target_temperature_high': 24, u'hvac_heat_x3_state': False, u'hvac_cool_x2_state': False, u'$timestamp': u'1412775839891', u'hvac_heater_state': False, u'auto_away_learning': u'ready', u'target_temperature_type': u'off', u'touched_by': {}, u'name': u'', u'can_cool': False, u'hvac_fan_state': False, u'$version': u'27126', u'current_temperature': 20.760000000000002, u'hvac_emer_heat_state': False, u'hvac_alt_heat_state': False}
Yet Another Nest Thermostat Plugin {"touched_by":{},"auto_away":0,"auto_away_learning":"ready","hvac_heat_x3_state":false,"compressor_lockout_enabled":false,"hvac_alt_heat_state":false,"target_temperature_type":"off","hvac_heater_state":false,"hvac_emer_heat_state":false,"can_heat":true,"compressor_lockout_timeout":0,"hvac_cool_x2_state":false,"target_temperature_high":24,"hvac_aux_heater_state":false,"hvac_heat_x2_state":false,"target_temperature_low":20,"hvac_ac_state":false,"target_temperature":16.5,"hvac_fan_state":false,"target_change_pending":false,"name":"","current_temperature":20.76,"hvac_alt_heat_x2_state":false,"can_cool":false,"$version":"27126","$timestamp":"1412775839891","serial":"xxxx"}
Yet Another Nest Thermostat Plugin obtained a device update... going to process: {u'hvac_ac_state': False, u'compressor_lockout_timeout': 0, u'hvac_alt_heat_x2_state': False, u'compressor_lockout_enabled': False, u'target_temperature': 16.5, u'serial': u'xxxx', u'auto_away': 0, u'can_heat': True, u'hvac_aux_heater_state': False, u'target_change_pending': False, u'hvac_heat_x2_state': False, u'target_temperature_low': 20, u'target_temperature_high': 24, u'hvac_heat_x3_state': False, u'hvac_cool_x2_state': False, u'$timestamp': u'1412775839891', u'hvac_heater_state': False, u'auto_away_learning': u'ready', u'target_temperature_type': u'off', u'touched_by': {}, u'name': u'', u'can_cool': False, u'hvac_fan_state': False, u'$version': u'27126', u'current_temperature': 20.760000000000002, u'hvac_emer_heat_state': False, u'hvac_alt_heat_state': False}