Zooz ZEN14 Double Outlet Plug

Can this plug get supported? It's an outdoor plug that can control 2 separate outlets. Right now, when you turn on one outlet you turn on the other. Thanks.

Code: Select all

Indigo Z-Wave Version: 2022.2.1
Node ID: 205
Model: Relay Switch
Model ID: 7000B003
Manufacturer: Zooz
Manufacturer ID: 027A
Protocol Version: 7.16
Application Version: 1.10
Model Definition Version: 0
Library Type: 3
Class Name: Relay Switch
Class Hierarchy: 04 : 10 : 00
Command Class Base: 25
Command Versions: 20v1 25v1 5Ev1 85v1 8Ev1 59v1 55v1 86v1 72v1 5Av1 87v1 73v1 98v1 9Fv1 60v4 6Cv1 7Av1 70v1
Encryption Status: Supported but not Enabled
Multi-Endpoint Types: 1:(10 : 00), 2:(10 : 00)
Multi-Endpoint Classes: 1:[5E 25 85 59 8E 6C 98 9F], 2:[5E 25 85 59 8E 6C 98 9F]
Multi-Instance Counts: - none -
Features: routing, beaming, security
Neighbors: 2, 6, 7, 10, 25, 30, 35, 37, 38, 39, 41, 47, 48, 50, 70, 80, 88, 95, 97, 118, 128, 131, 132, 135
Associations: 1:[1] 2:[] 3:[]
Config Values: - none -

[matt (support)]

Yes, added to our request list, hopefully for the next release.

Yes, added to our request list, hopefully for the next release.

Great. Thank you.

Ralph

[matt (support)]

We've added support for the Zooz Double Outlet Relay (ZEN14) in Indigo 2022.2.0, which is now available.

I'm using the ZEN14 double outlet and it's showing up twice in the device list. (attached) Syncing does not resolve the issue and keeps the devices disabled.

Any thoughts on how to resolve? Thanks!

Syncing - started for "Backyard Fence Switches"
Z-Wave Syncing - retrieved module neighbors list: 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 12, 16, 18, 20, 21, 24, 25, 27, 28, 32, 33, 34, 35, 36, 40, 41, 42, 43, 45, 47, 48, 50, 52, 53, 68, 71, 72
Z-Wave Syncing - assigning return route to "051 - Backyard Fence Switches"
Z-Wave Syncing - assigned return route
Z-Wave Syncing - retrieved manufacture and model names: Zooz - 027A, Double Outlet Relay (ZEN14) - 7000B003
Z-Wave Syncing - retrieved protocol version 7.16, app version 1.10
Z-Wave Syncing - retrieved class hierarchy: Routing Slave : Relay Switch : -- (04 : 10 : 00, base 25)
Z-Wave Syncing - retrieved command classes: 20v1 25v1 5Ev1 85v1 8Ev1 59v1 55v1 86v1 72v1 5Av1 87v1 73v1 98v1 9Fv1 60v4 6Cv1 7Av1 70v1
Z-Wave Syncing - retrieved encrypt commands: - none -
Z-Wave Syncing - retrieved capabilities: routing, beaming, security
Z-Wave Syncing - retrieved multi-endpoint types: 1:(10 : 00), 2:(10 : 00)
Z-Wave Syncing - retrieved multi-endpoint classes: 1:[5E 25 85 59 8E 6C 98 9F], 2:[5E 25 85 59 8E 6C 98 9F]
Z-Wave Syncing - retrieved group 1 associations: [1]
Z-Wave Syncing - retrieved group 2 associations: []
Z-Wave Syncing - retrieved group 3 associations: []
Z-Wave Syncing - group 1 association to interface already exists (skipping)
Z-Wave Syncing - retrieved parameter 1 "LED behavior" is 0 "ON when switch is ON, OFF when switch is OFF"
Z-Wave Syncing - retrieved parameter 7 "LED brightness" is 2 "Dim"
Z-Wave Syncing - retrieved parameter 6 "Power up state" is 2 "Last State"
Z-Wave Syncing - retrieved parameter 8 "Enable manual control via button" is true
Z-Wave Syncing - disabling device "051 - Switch 2" using same node ID (resync disabled device with correct node ID to enable)
Z-Wave Syncing - disabling device "Backyard Fence Lights" using same node ID (resync disabled device with correct node ID to enable)
Z-Wave Syncing - disabling device "Backyard Fence Switches" using same node ID (resync disabled device with correct node ID to enable)
Z-Wave Syncing - complete
Z-Wave sent "Backyard Fence Switches" status request

[matt (support)]

Just delete the set of 3 devices you aren't using. You'll get a warning message if they are being used in any actions, etc., in which case you need to modify those actions to point to the "other" devices.

If I delete the three options I am not using, it says it will also delete the dependent objects (the other three). It does not matter which set I select to delete, it says the others will also be deleted.

[jay (support)]

It's likely that you have used each device in different things. You'll want to confirm that for each dependency on the old devices, you edit those dependencies to use the new device.

Note that this could have been avoided by just resyncing the prior device rather than adding a new device. Just a note for future reference.