Qubino - Flush Dimmer 0-10V - Supported?

Does Indigo support these?

If so what other hardware is necessary (bridge of some kind?).

Thanks,

Anthony

Anyone?

[matt (support)]

Indigo supports the Qubino Flush Micro Dimmer (ZMNHDD), if that is the model you are inquiring about.

No, its the ZMNHBD
https://qubino.com/products/flush-dimme ... -10v-tech/
Tim

[matt (support)]

Indigo supports the ZMNHBD, but the ZMNHBD is actually this dual relay module. It looks like Qubino copy/pasted the Supported Frequencies table from the dual relay product page to the newer Flush Dimmer 0-10V page (search for ZMNHBD on both product pages and you'll see what I mean) . So I don't know what model number the Flush Dimmer 0-10V actually is, but Indigo supports two versions of the Flush Dimmer: ZMNHDD and ZMNHDA. I don't think either one of those is the 0-10V. If someone orders one and submits the sync results to us then we'll add it to our list of modules to support.

Ok, I checked more thoroughly.
It’s actually model ZMNHVD
https://qubino.com/wp-content/uploads/2 ... ng_2.2.pdf

Tim

Finally, getting back to this project.

Okay, so if I order one, submit sync results, this will likely work?

Thanks,

Anthony

I found one of these in the drawer a few weeks back before going on holidays! Don’t think I ever included it as I bought in error. I’ll add it later and report back with what the details are - it’s around the house for a few years so likely to be an older model.


Sent from my iPhone using Tapatalk

If someone orders one and submits the sync results to us then we'll add it to our list of modules to support.

Hi Matt,

See sync results below from the module I had gathering dust for a few years! Let me know if you need anything else.

Code: Select all

   Z-Wave                          Syncing - started for "108 - Mulitlevel Switch"
   Z-Wave                          Syncing - retrieved module neighbors list: 30, 38, 44, 57, 93
   Z-Wave                          Syncing - assigning return route to "108 - Mulitlevel Switch"
   Z-Wave                          Syncing - assigned return route
   Z-Wave                          Syncing - retrieved manufacture and model names: Qubino - 0159, Switch (ZMNHVD3) - 00010053
   Z-Wave                          Syncing - retrieved protocol version 4.34, app version 2.04
   Z-Wave                          Syncing - retrieved class hierarchy: Routing Slave : Mulitlevel Switch : -- (04 : 11 : 00, base 26)
   Z-Wave                          Syncing - retrieved command classes: 20v1 25v1 26v3 27v1 8Ev1 70v1 72v1 73v1 5Ev1 59v1 5Av1 86v1 85v1
   Z-Wave                          Syncing - retrieved encrypt commands: - none -
   Z-Wave                          Syncing - retrieved capabilities: routing, beaming
   Z-Wave                          Syncing - retrieved group 1 associations: []
   Z-Wave                          Syncing - retrieved group 2 associations: []
   Z-Wave                          Syncing - retrieved group 3 associations: []
   Z-Wave                          Syncing - retrieved group 4 associations: []
   Z-Wave                          Syncing - retrieved group 5 associations: []
   Z-Wave                          Syncing - retrieved group 6 associations: []
   Z-Wave                          Syncing - added group 1 association to interface
   Z-Wave                          Syncing - created device "108 - Switch (ZMNHVD3)"
   Z-Wave                          Syncing - complete


[matt (support)]

Thanks –now that we have the sync info (and model ID), we'll take a look at it in more detail.

Any luck on this? Just ordered a couple (fingers crossed!)

Thanks,

Anthony

Will these show up in Indigo? Just received them today and would like to install tomorrow?

Any tips?

[matt (support)]

They are not currently supported in Indigo but are on the device request list. We don't give ETAs for when new features (or device support) will be added, but it is definitely on the list.

Thanks for the quick reply.

Is there a work around to get them running?

[matt (support)]

I'm not sure, what happens if you try to use it? It might show and work in Indigo as a basic dimmer type device. Maybe forum user Colly (from above) can report his experiences with trying to use it.