- Code: Select all
08 Apr 2019 12:58:41
Z-Wave Syncing - started for "035 - Notification Sensor"
Z-Wave Syncing - retrieved module neighbors list: 1, 3, 4, 13, 23, 29
Z-Wave Syncing - assigning return route to "035 - Notification Sensor"
Z-Wave Syncing - assigned return route
Z-Wave Syncing - retrieved manufacture and model names: Popp & Co. - 0154, Notification Sensor - 00040008
Z-Wave Syncing - retrieved protocol version 4.38, app version 0.09
Z-Wave Syncing - retrieved class hierarchy: Routing Slave : Notification Sensor : Notification Sensor (04 : 07 : 01, base 00)
Z-Wave Syncing - retrieved command classes: 20v1 80v1 84v2 85v1 86v1 30v1 70v1 71v1 72v1 73v1 59v1 5Av1 5Ev1
Z-Wave Syncing - retrieved encrypt commands: - none -
Z-Wave Syncing - retrieved capabilities: routing, battery, beaming, waking
Z-Wave Syncing - retrieved wake interval of 1440 minutes
Z-Wave Syncing - device "035 - Notification Sensor" wake interval changed to 1440 minutes
Z-Wave Syncing - retrieved group 1 associations: [1]
Z-Wave Syncing - retrieved group 2 associations: []
Z-Wave Syncing - group 1 association to interface already exists (skipping)
Z-Wave Syncing - retrieved battery level of 100%
Z-Wave Syncing - created device "035 - Notification Sensor"
SQL Logger creating table device_history_934991737 for "035 - Notification Sensor"
SQL Logger adding column "batterylevel" to table device_history_934991737 ("035 - Notification Sensor")
SQL Logger adding column "batterylevel_ui" to table device_history_934991737 ("035 - Notification Sensor")
Z-Wave Syncing - complete
Z-Wave sent "035 - Notification Sensor" status request
Z-Wave received "035 - Notification Sensor" status update battery level 100%/code]
The sensor clearly works otherwise because the siren goes off when I dip the sensor in water. But nothing happens in Indigo. Nothing in the log either.
The weirdest thing is that I have the exact same sensor made by Neo Coolcam. The physical sensor is exactly the same but it's branded as Neo coolcam. Also it appears that the firmware version is different. This is the log information I get when adding the Neo Coolcam version of the sensor:
[code]Syncing - started for "036 - Notification Sensor"
Z-Wave Syncing - retrieved module neighbors list: 1, 2, 4, 13, 23, 29
Z-Wave Syncing - assigning return route to "036 - Notification Sensor"
Z-Wave Syncing - assigned return route
Z-Wave Syncing - retrieved manufacture and model names: Neo - 0258, Water Sensor (WS01Z) - 00031085
Z-Wave Syncing - retrieved protocol version 4.05, app version 2.54
Z-Wave Syncing - retrieved class hierarchy: Routing Slave : Notification Sensor : Notification Sensor (04 : 07 : 01, base 00)
Z-Wave Syncing - retrieved command classes: 20v1 80v1 84v2 85v1 86v1 30v1 70v1 71v1 72v1 73v1 59v1 5Av1 5Ev1
Z-Wave Syncing - retrieved encrypt commands: - none -
Z-Wave Syncing - retrieved capabilities: routing, battery, beaming, waking
Z-Wave Syncing - retrieved wake interval of 1440 minutes
Z-Wave Syncing - device "036 - Notification Sensor" wake interval changed to 1440 minutes
Z-Wave Syncing - retrieved group 1 associations: [1]
Z-Wave Syncing - retrieved group 2 associations: []
Z-Wave Syncing - retrieved group 3 associations: []
Z-Wave Syncing - retrieved group 4 associations: []
Z-Wave Syncing - group 1 association to interface already exists (skipping)
Z-Wave Syncing - retrieved battery level of 100%
Z-Wave Syncing - created device "036 - Water Sensor"
SQL Logger creating table device_history_276753803 for "036 - Water Sensor"
Z-Wave Syncing - complete
SQL Logger adding column "batterylevel" to table device_history_276753803 ("036 - Water Sensor")
SQL Logger adding column "batterylevel_ui" to table device_history_276753803 ("036 - Water Sensor")
Z-Wave received "036 - Water Sensor" status update battery level 100%
Z-Wave received "036 - Water Sensor" status update is off
The website of the POPP version is here:
https://www.popp.eu/products/sensors/flood-sensor/
The webiste of the neocam one is here:
https://www.szneo.com/en/products/index.php?id=40
