Hi guys,
maybe my first post? Don't know/remember.
Well, I have a Everspring ST814 Temperature/Humidity Sensor since a couple of years. It has worked flawlessly a couple of years with Indigo6 and The Z-stick 2.
I upgraded to Indigo7 and did not notice any problems with it, but I am not shore since I did not give it any special treatment... It have just worked all the time before.
Then I last weekend upgraded my Z-stick to gen5 and re-synced all my devices. Everything went well. No errors and no problems. Just yesterday I noticed that it was getting cold (-7 degrees Celsius outside ) in my hobby room in the garage. I found out that the temperature and humidity statuses from my ST814 are not updated to Indigo7!
I am using the "Smart Devices" plugin with the ST814 as thermostat and two Fibaro Wall Plug Relays (FGWP101) are steering my two radiators. It has worked ok for about a year, no problems.
Now I have synced the ST814 several times with the same result: the sync goes through very well and everything seems good. BUT, the ST814 doesn't update anymore after the sync.
Indigos "Last update" does not wine about anything being wrong. It just seems that everything is ok? If I choose the ST814 and press "Send status request" I will get a red "no ack" status. So it seems somehow that the ST814 is dead after the "Define and sync..." procedure.
Any good thoughts what I should do now? I will also attach the sync log. No errors or problems are showing in the Event log for the ST814...
3 Dec 2016, 24:11.03
Z-Wave Syncing - started for "03 Temp Hobby room"
Z-Wave Syncing - retrieved module neighbors list: 2, 3, 4, 8, 9, 10
Z-Wave Syncing - assigning return route to "005 - 03 Temp Hobby room"
Z-Wave Syncing - assigned return route
Z-Wave Syncing - retrieved manufacture and model names: Everspring - 0060, Temperature/Humidity Sensor (ST814) - 00060001
Z-Wave Syncing - retrieved protocol version 2.64, app version 1.06
Z-Wave Syncing - retrieved class hierarchy: Routing Slave : Multilevel Sensor : Multilevel Sensor (routing) (04 : 21 : 01, base 31)
Z-Wave Syncing - retrieved command classes: 20v1 80v1 84v2 85v1 86v1 60v2 70v1 31v2 72v1
Z-Wave Syncing - retrieved encrypt commands: - none -
Z-Wave Syncing - retrieved capabilities: routing, battery, beaming, waking
Z-Wave Syncing - retrieved wake interval of 30 minutes
Z-Wave Syncing - device "005 - 03 Temp Hobby room" wake interval changed to 30 minutes
Z-Wave Syncing - retrieved multi-endpoint types: 1:(21 : 01), 2:(21 : 01)
Z-Wave Syncing - retrieved multi-endpoint classes: 1:[31], 2:[31]
Z-Wave Syncing - retrieved group 1 associations: [1]
Z-Wave Syncing - retrieved group 2 associations: []
Z-Wave Syncing - group 1 association to interface already exists (skipping)
Z-Wave Syncing - retrieved parameter 2 "ON temperature trigger" is 99 degrees
Z-Wave Syncing - retrieved parameter 3 "OFF temperature trigger" is 99 degrees
Z-Wave Syncing - retrieved parameter 4 "ON humidity trigger" is 99 %
Z-Wave Syncing - retrieved parameter 5 "OFF humidity trigger" is 99 %
Z-Wave Syncing - retrieved parameter 6 "Reporting interval" is 5 minutes
Z-Wave Syncing - retrieved parameter 7 "Temperature reporting threshold" is 0 degrees
Z-Wave Syncing - retrieved parameter 8 "Humidity reporting threshold" is 0 %
Z-Wave Syncing - retrieved battery level of 60%
Z-Wave Syncing - complete
Z-Wave sent "03 Temp Hobby room" status request
Z-Wave sent "03 Humidity Sensor Hobby room" status request
Z-Wave received "03 Temp Hobby room" sensor update to 17.1 °C
Z-Wave received "03 Humidity Sensor Hobby room" sensor update to 39%
Living in Finland (The land of Kimi Räikkönen and Santa Claus) so therefore some kind of odd time in the log