Lutron-controlled device throwing X10 J10 status request

Posted on
Sun Jul 25, 2021 10:54 am
mundmc offline
User avatar
Posts: 1060
Joined: Sep 14, 2012

Lutron-controlled device throwing X10 J10 status request

Hi,
By dumb luck, I figured out wherre my X10 "J10 status request" spamming error comes from: conces controlled by an on/off Lutron Caseta Pro switch!

Has this been encountered before? (I'll check with @FlyingDiver, who wroote the awesome plugin)
Thoughts on whether this is coming from LED sconces or the Lutron switch?
Any hacks that might address this short of replacing either part?

FWIW, this is not the only on/off Lutroin switch I use, and the others do not appear to throw this error.

Posted on
Sun Jul 25, 2021 12:34 pm
FlyingDiver offline
User avatar
Posts: 7189
Joined: Jun 07, 2014
Location: Southwest Florida, USA

Re: Lutron-controlled device throwing X10 J10 status request

My guess is it's the sconces making noise on the power line which is being interpreted as an X10 message.

Putting an X10 filter on that line, either before the switch or between the switch and the sconce, will probably fix it. No worries about it interfering with the Lutron switch - they don't use powerline signals at all.

joe

joe (aka FlyingDiver)
my plugins: http://forums.indigodomo.com/viewforum.php?f=177

Posted on
Sun Jul 25, 2021 12:35 pm
FlyingDiver offline
User avatar
Posts: 7189
Joined: Jun 07, 2014
Location: Southwest Florida, USA

Re: Lutron-controlled device throwing X10 J10 status request

You could also try swapping the switch between locations to see if it stays with the sconce or moves with the switch...

joe (aka FlyingDiver)
my plugins: http://forums.indigodomo.com/viewforum.php?f=177

Posted on
Mon Jul 26, 2021 10:54 am
mundmc offline
User avatar
Posts: 1060
Joined: Sep 14, 2012

Re: Lutron-controlled device throwing X10 J10 status request

My thanks as always!

Page 1 of 1

Who is online

Users browsing this forum: No registered users and 7 guests