Z-wave on sale today at MonoPrice

2 for $35: Z-Wave Wall Socket AC/USB Plug-In Receptacle

also sale on Garage Sensor, motion sensor.

[jay (support)]

Cool!

[MODERATOR NOTE] moved to a more appropriate forum.

Does anyone know for sure if these work with indigo?

I have monoprice door/window inserts, and both types of motion sensors and they work great. Didn't need the receptacles but I bet they work fine.

Thanks!

CRAP - purchased five of these and they are not supported - it joins and report battery but no info on open or closed - I tried with and without encryption - sigh, any way to make these work

Code: Select all

Indigo Z-Wave Version: 2.0.113
Node ID: 39
Model: Notification Sensor
Model ID: 02010008
Manufacturer: Unknown
Manufacturer ID: 0208
Protocol Version: 4.34
Application Version: 1.05
Model Definition Version: 0
Library Type: 3
Class Name: Notification Sensor
Class Hierarchy: 04 : 07 : 01
Command Class Base: 00
Command Versions: 20v1 80v1 84v2 85v1 86v1 70v1 71v1 72v1 73v1 59v1 7Av1 5Av1 5Ev1
Encryption Status: Not Supported
Multi-Endpoint Types: - none -
Multi-Endpoint Classes: - none -
Multi-Instance Counts: - none -
Features: routing, battery, beaming, waking
Neighbors: 2, 3, 4, 5, 6, 7, 8, 9, 12, 14, 18, 19, 20, 21, 22, 25, 26, 31, 32, 33, 34
Associations: 1:[1] 2:[]
Config Values: - none -


Dang it!

I have the in door ones, and they work fine. Sorry!

Just send the bill to Different Computers, I'm pretty sure his guarantee of working with Indigo was implied...

[matt (support)]

CRAP - purchased five of these and they are not supported - it joins and report battery but no info on open or closed - I tried with and without encryption - sigh, any way to make these work

It is probably sending commands you can catch with the Match Raw Bytes trigger type. Turn on the debug logging checkbox (via the Interfaces->Z-Wave->Configure... menu item), then open/close the door/window a few times and copy/paste the Event Log results into a reply for me.

Thanks for any help - see below

OPEN

Code: Select all

   Z-Wave                          received "Open/Close Office Window 040 - Notification Sensor" status update battery level 100%
   Z-Wave Debug                    RCVD requestAlarmSensorStatus: 01 10 00 04 00 28 0A 71 05 00 00 00 FF 06 16 00 00 52
   Z-Wave Debug                    . .  requestAlarmSensorStatus: node 040, endpoint None, cmdClass 71, type 0, value 0, classSubKey 710000
   Z-Wave Debug                    . .  requestAlarmSensorStatus: typeExt 6, valueExt 22, classSubKeyExt 7100000616
   Z-Wave Debug                    RCVD requestBatteryLevel: 01 09 00 04 00 28 03 80 03 64 3E
   Z-Wave Debug                    . .  requestBatteryLevel: node 040, level 100
   Z-Wave                          received "Open/Close Office Window 040 - Notification Sensor" status update battery level 100%

Closed

Code: Select all

     received "Open/Close Office Window 040 - Notification Sensor" status update battery level 100%
   Z-Wave Debug                    RCVD requestAlarmSensorStatus: 01 10 00 04 00 28 0A 71 05 00 00 00 FF 06 17 00 00 53
   Z-Wave Debug                    . .  requestAlarmSensorStatus: node 040, endpoint None, cmdClass 71, type 0, value 0, classSubKey 710000
   Z-Wave Debug                    . .  requestAlarmSensorStatus: typeExt 6, valueExt 23, classSubKeyExt 7100000617
   Z-Wave Debug                    RCVD requestBatteryLevel: 01 09 00 04 00 28 03 80 03 64 3E
   Z-Wave Debug                    . .  requestBatteryLevel: node 040, level 100
   Z-Wave                          received "Open/Close Office Window 040 - Notification Sensor" status update battery level 100%

[matt (support)]

There are a couple of approaches you can take to get this working now (we'll get a device definition added to a future version of Indigo as well):

One is that you could use the Match Raw Packet trigger type (after selecting Z-Wave Command Received), and choose your device in the From popup menu. For the open trigger try a Match Bytes field like this:

* 0x71 0x05 0x00 0x00 0x00 0xFF 0x06 0x16 *

And for the close trigger try:

* 0x71 0x05 0x00 0x00 0x00 0xFF 0x06 0x17 *

Alternatively, you could use Peter's Zwave Lock Manager plugin. It can be used with Z-Wave door/window sensors as well as locks.

Thanks Matt - BTW - will that be the same command for the other 4 and will matching the command received change the status of the actual device - I think it did not last time I did something like that?

BTW, these work fine

[matt (support)]

Yes, same command will work for all of them. It won't change the device state.

Thanks Matt - BTW - the multi sensor is not 100% - it all works but when I try to change it form C to F it say change pending but it does not ever change into F